@sychochef6666 great question so you would only need the bottom face plate that is on the post you’ll want to mark the whole locations and you’ll wanna pre-drill using the right size drill bit for anchoring it down you wanna use red head, concrete anchors, most likely half inch by 3 inch it will tell you the size concrete bit to use to pre-drill them
Thank you so much please subscribe to my channel. It’s absolutely free and then return if you ever have any questions about anything feel free to reach out and if I can help you, I will.
yeah, it was hot that day. I assure you they are all on correctly though. they won’t allow you to put it on upside down. They only go on one way, so it’s kinda dumb proof as far as that. Lol thanks for your comment and thanks for watching. Please subscribe it’s free and if you really want to be saw that like and share.
glad it helped please subscribe to my channel and like and share I’d really appreciate it and if you ever have any questions, feel free to reach out if I can help you out, I will
I am so glad I was able to help you out. That is awesome. Please subscribe to my page and it’s free and if you really want to be nice like and share any video and if you ever have any questions or need help around the house with anything feel free to ask him if I can help you in anyway, I will.
I've only got 4 steps, do I still need to get my bottom step posts to measure 42"? The posts at the top of the steps are OK at 39" right?? Did you make the bottom 42" only because you used 2 sections to make 8 ' stair railing??
No, the post at the bottom step need to be 42 to allow for the angle and to still allow for the height of the top rail. Just leave them long if you’re getting a 8 foot 4 x 4 I would even just cut it at 48 inches if you’re getting a pose sleeve 8 foot I too would cut that at 48 inches once you put your rails up you can cut it short as you like to. I hope this helps please subscribe it’s free and if you want to be really solid like and share thank you so much if you ever have any questions, please feel free to ask if I can help you I will.
Thank you so much please subscribe to my channel it’s free and if you want to be really nice like and share and in return if you ever have any questions and I can help you feel free to ask and I’ll do my best. There is a video showing how we installed the post up
Watch the video it shows you what to do you use the same postop kit but you by 8 foot post sleeves and you cut them in half at 48 inches each when you slide that on you take the black piece that goes on the post up and you slide it in upside down in the post sleeve it’s all in the video please subscribe it’s free and if you want to be really solid lake and Cher, do you have any other questions please ask
Thanks for responding back, but, i was asking about that 3" bracket under the bottom rail. How does that go on? I cant find one video that shows it. It might be super simple, but, i havent gotten the railings yet.
@@bey111101 so that is just a short little piece of square plastic that they provide you with, and it gets a small screw that screws it to the bottom rail
I believe that was the number one square bit if not it’s a number 2 if you have any other questions, please feel free to ask if I can answer them. I most certainly will please subscribe it’s absolutely free and if you want to be really solid like and share thank you so much.
I don’t have a camera guy and I don’t really know how to make these videos. I just know how to do the work learning as I go. Sorry if you didn’t like the video.
Glad we found this video it is the same railing I'm doing. Very informative.
Glad it was able to help please like and subscribe. It’s absolutely free if you really wanna be solid, share it.
What about attaching posts to a cement or concrete? Do I do the same method but minus one of the steel plates
@sychochef6666 great question so you would only need the bottom face plate that is on the post you’ll want to mark the whole locations and you’ll wanna pre-drill using the right size drill bit for anchoring it down you wanna use red head, concrete anchors, most likely half inch by 3 inch it will tell you the size concrete bit to use to pre-drill them
Great video
Thank you so much please subscribe to my channel. It’s absolutely free and then return if you ever have any questions about anything feel free to reach out and if I can help you, I will.
I watched you more than once put the bottom brackets on the deck railings upside down. All in all, good video, bro. It's very detailed.
yeah, it was hot that day. I assure you they are all on correctly though. they won’t allow you to put it on upside down. They only go on one way, so it’s kinda dumb proof as far as that. Lol thanks for your comment and thanks for watching. Please subscribe it’s free and if you really want to be saw that like and share.
Dude you’re awesome for this. Super easy to follow and the only person to have a video on this. You saved me so much time and headache
glad it helped please subscribe to my channel and like and share I’d really appreciate it and if you ever have any questions, feel free to reach out if I can help you out, I will
Great job, thanks for sharing your knowledge
You are welcome please subscribe and if you want to be really solid like and share
Huge help today...thank you!
I am so glad I was able to help you out. That is awesome. Please subscribe to my page and it’s free and if you really want to be nice like and share any video and if you ever have any questions or need help around the house with anything feel free to ask him if I can help you in anyway, I will.
Nice work
Thank you please subscribe
Can you use a straight rail kit on the stairs as long as you cut the angle correctly?
no, you cannot. You have to use a stair rail if you use a straight rail, your spindles will not be standing plumb.
I've only got 4 steps, do I still need to get my bottom step posts to measure 42"? The posts at the top of the steps are OK at 39" right?? Did you make the bottom 42" only because you used 2 sections to make 8 ' stair railing??
No, the post at the bottom step need to be 42 to allow for the angle and to still allow for the height of the top rail. Just leave them long if you’re getting a 8 foot 4 x 4 I would even just cut it at 48 inches if you’re getting a pose sleeve 8 foot I too would cut that at 48 inches once you put your rails up you can cut it short as you like to. I hope this helps please subscribe it’s free and if you want to be really solid like and share thank you so much if you ever have any questions, please feel free to ask if I can help you I will.
42” if you want to match the stair railing to the decks railing.
Very good video. I wish you would have shown how you put in the bottom peg that gives support. Is the just a hole there that you pop it into?
Thank you so much please subscribe to my channel it’s free and if you want to be really nice like and share and in return if you ever have any questions and I can help you feel free to ask and I’ll do my best. There is a video showing how we installed the post up
The other video is titled veranda, deck post watch that video
yes, the bottom support bracket gets installed with a little screw. Measure your bottom rail mark the middle and place it there.
It looks like Home Depot only sells one size of post install kit, where do I get the taller ones for stairs?
Watch the video it shows you what to do you use the same postop kit but you by 8 foot post sleeves and you cut them in half at 48 inches each when you slide that on you take the black piece that goes on the post up and you slide it in upside down in the post sleeve it’s all in the video please subscribe it’s free and if you want to be really solid lake and Cher, do you have any other questions please ask
@@everydayhomeimprovements9345 Did you use the 42 in post on the top step (deck) also?
No 36 inch post up for the top
Thanks for responding back, but, i was asking about that 3" bracket under the bottom rail. How does that go on? I cant find one video that shows it. It might be super simple, but, i havent gotten the railings yet.
The bottom bracket slides right on it’s at the 4:20 second mark
The bracket that helps with the weight. You center it in the middle
@@bey111101 so that is just a short little piece of square plastic that they provide you with, and it gets a small screw that screws it to the bottom rail
Yes it helps the bottom rail from sagging
Do you have a video for installing the post?
ruclips.net/video/Rlaa__xQy28/видео.htmlsi=psRzYsJslSnBBO1A
yes, I do. Here’s the link please subscribe to my page unlike the video if you want to be really nice to share it.
@@everydayhomeimprovements9345 Greatttttttt!!! Thank you so much.
What size bits for the screw?
I believe that was the number one square bit if not it’s a number 2 if you have any other questions, please feel free to ask if I can answer them. I most certainly will please subscribe it’s absolutely free and if you want to be really solid like and share thank you so much.
Hi I can’t seem to find contact info for you on your channel. Where would I find that? Thanks!
What type of contact info are you looking for? Where are you located?
732-213-5678
Did your camera man go home??
I don’t have a camera guy and I don’t really know how to make these videos. I just know how to do the work learning as I go. Sorry if you didn’t like the video.
Sad that you didnt do stair treads with borders so wouldn't see the honeycome of butt ends 😮