How to Replace Front Brakes 2012-2018 Nissan Altima
HTML-код
- Опубликовано: 7 июн 2023
- Buy Now!
New Brake Pads from 1AAuto.com 1aau.to/ia/1ABPS02887
New Brake Rotor from 1AAuto.com 1aau.to/ia/1ABRR01534
This video shows you how to install new, quality TRQ brake pads and rotors on your 2012-2018 Nissan Altima. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima
Tools you will need:
• Pry Bar 1aau.to/oSr/1AXAA00020
• 10mm Wrench 1aau.to/oUI/1AXAA00010
• 14mm Socket 1aau.to/obqX/1AXAA00015
• 21mm Socket 1aau.to/oae8/1AXAA00043
• 22mm Socket 1aau.to/on3/1AXAA00266
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oaH/1AXAA00278
• Brake Caliper Hanger 1aau.to/oik/1AXAA00439
• 1/2 Inch Impact Gun 1aau.to/osg/1AXAA00252
• Ratchet 1aau.to/obx5/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/obqX/1AXAA00015
• Torque Wrench 1aau.to/oaBT/1AXAA00044
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/oZH/1AXSS00048
• Safety Glasses 1aau.to/oSQ/1AXAA00343
• Silicone Paste
• Drain Pan 1aau.to/oyG/1AXAA00320
• Floor Jack 1aau.to/o3j/1AXAA00068
• Hammer 1aau.to/oS3/1AXAA00091
• Jack Stands 1aau.to/oR5/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/osr/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is the clearest, most concise, best-produced auto repair video I’ve ever seen on RUclips. I’ll definitely be following for further repairs!
All these comments on what she should and shouldn’t do makes me wounder why people are here watching “tutorial videos” since they’re obviously professionals
Possibly the best repair video I have watched on RUclips. Thanks so much, great job.
Very helpful video. Thank you, I am planning on changing my daughters brakes and this was the best video I have seen for her car.
Even though I already know how, I love watching the tutorials.
Never lay the caliper hanging on the hose like that and there is no need to open the bleeder
If the bracket bolts have washers, they torque to 107 ft/lb. Also I have found a couple times brand new rotors have been out of spec causing vibration and have to be turned. I now use a dial indicator to check the new rotors. Nice job!
Thank You so much for this video!
Great tutorial
All praises to the most HIGH...! Incredible
very thorough, Thank you!
Excellent video.
What do you use for the rear that impact wrench won't fit
Mis respetos excelente.
Better to put the grease where the pads actually slide then under the hardware that's stationary.
This does NOT apply to a 2018
Not supposed to let the caliper hang like that, terrible video
"aí maí gad"