How to Replace Lower Control Arms 2010-2013 Kia Forte Koup

Поделиться
HTML-код
  • Опубликовано: 17 сен 2024
  • Buy Now!
    New Control Arm from 1AAuto.com 1aau.to/ia/1ASL...
    This video shows you how to install new lower control arms from TRQ on your 2010-2013 Kia Forte Koup. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
    Estimated installation time for a professional technician is approximately: 1 hour 18 minutes
    This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
    2010 Kia Forte Koup
    2011 Kia Forte Koup
    2012 Kia Forte Koup
    2013 Kia Forte Koup
    Tools you will need:
    • Pry Bar 1aau.to/oafZ/1A...
    • 17mm Wrench 1aau.to/oaot/1A...
    • 19mm Wrench 1aau.to/oaot/1A...
    • 17mm Socket 1aau.to/ocsw/1A...
    • 19mm Socket
    • 21mm Socket
    • 32mm Socket 1aau.to/oeT/1AA...
    • Wire Cutters
    • Socket Extensions 1aau.to/ocsw/1A...
    • Torque Wrench 1aau.to/obtM/1A...
    • Universal Joint
    • Gloves 1aau.to/obCH/1A...
    • Rust Penetrant
    • Safety Glasses
    • Floor Jack 1aau.to/oaLY/1A...
    • Hammer
    • Jack Stands 1aau.to/oays/1A...
    • Pole Jack
    • Punch
    • Wheel Chocks
    • Wire Brush 1aau.to/oAQ/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 3