Blimey he saws as fast as a fiddlers elbow playing the Flight of the Bumble Bee! An informative video blessed by no awful music or equally dire narration. Thank you!
Wow!. I'm really impressed with your innovative ideas and shortcuts to bottle cutting. I have never done woodwork before but I actually think even "I" can follow your instructions! ;-) Thanks very much for your lesson.
Ridiculous amount of haters for such a great video, you would think you have done something controversial. This is a great video, thank you for the tip, ignore the urbanite naysayers who couldn't craft their way out of a wet paper sack.
Nice easy build! Wish I would have come across this vid before I built the one I made last week, which cost me as much in parts as one you can buy online.
Great video. I did not understand what held the glass cutter in place though. I understand the hole for adjusting up and down, but what keeps it from sliding through?
This is great, but----I dont understand what you're using to actually "score" the glass. I never saw anywhere in the video where you show the metal bit that was placed in the hole.
As an Irishman I read the Vodka label " Tesco EVERYDAY Vodka " and I naturally assumed that this was the recommended dosage, Jayzuz it's great stuff but I can't grip the bottle cutter at all LOL ! Great video only kidding ( I actually drink Everyday whiskey )
Señor buenos días soy del Peru y soy aficionado ,lo felicito por su ingenio pero seria bueno que pudiera las medidas para poderlo hacer o no quiere que lo copien
Saludos me podia decir un mas o menos las medidas de las tres tablitas de largo el largo del palito que entra en la boca de la botella y cuantos rotos le hizo a la tablita para poner el corta bidrio muchas gracias por su atención
Hi awesome , do you sell these and if so do you have a selling page please I don't have the tools to create this but I'm interested in purchasing one . Can the glass cutter be moved to a lower position ? Thank you , Miriam
While I appreciate your belt-and-suspenders approach with the screws+glue, you would almost certainly get by nicely with glue and maybe a couple screws each side of the cross-piece.
Wait ! You didn't use putty this time when you heated the scribe on the glass with hot water, so your not staying to the instructions of your first video on how to cut the bottle.
![EASY BOTTLE CUTTING. HOW TO MAKE A GLASS BOTTLE CUTTER AT HOME [SIMPLE AND EFFECTIVE]](http://i.ytimg.com/vi/C8Om2QnUTPg/mqdefault.jpg)
![EASY BOTTLE CUTTING. HOW TO MAKE A GLASS BOTTLE CUTTER AT HOME [SIMPLE AND EFFECTIVE]](/img/tr.png)
that was the most to the point video ever made... and fun to watch...
zero language barrier... GREAT TUTORIAL VIDEO
This might be the best design I have seen so far.
I love the compact form factor.
Thank You for this video!
100% agree
Blimey he saws as fast as a fiddlers elbow playing the Flight of the Bumble Bee! An informative video blessed by no awful music or equally dire narration. Thank you!
Wow!. I'm really impressed with your innovative ideas and shortcuts to bottle cutting. I have never done woodwork before but I actually think even "I" can follow your instructions! ;-)
Thanks very much for your lesson.
I like it that you show your finish product at the very beginning of the video.
I wish I was as handy as that...you made it look so easy...brilliant!!
Very nice and straight to the point video!
Thank you for making and uploading the video.
Amigo...foi o melhor que vi ate hoje ....parabens !!!!
vi muchos y este es el mejor mecanismo para cortar botellas , lo felicito desde Argentina
Good video,but what was the last metal item which was cutting the glass?
Ridiculous amount of haters for such a great video, you would think you have done something controversial. This is a great video, thank you for the tip, ignore the urbanite naysayers who couldn't craft their way out of a wet paper sack.
"Dont just sit there, invent something!"
-U.S. Patent Office
Bien explicado, pero demasiados pasos, herramientas y tiempo.
Nicely done! You were smart to speed up the video...fun to watch !
Awesome jig, loved it's simplicity!
Great idea Sean and well put together!
Make me one..... That was too much to create.... Love it 🍷
Nice easy build! Wish I would have come across this vid before I built the one I made last week, which cost me as much in parts as one you can buy online.
Maravilhoso, amei , simples,fácil e eficiente...
BRILLIANT!
Great video. I did not understand what held the glass cutter in place though. I understand the hole for adjusting up and down, but what keeps it from sliding through?
+Mea Foodie
The hole is slightly smaller than the glass cutter and
gripping the bottle cutter in the vice locks the glass cutter in place
Excellent!
Good job PM Im working on a water feature using wine bottles and this will be very handy cheers
***** cool I would love to see other people make this and repost it on youtube
woooowwwww eres un MASTER ¡¡
Parabéns pelo seu trabalho Sean Beardon!! Excelente vídeo!!
A great craft man
Works great!
This is brilliant - and love the 'Everyday' Vodka lol
Hi
very good , gonna try this myself , thanks
Nice video.. How brittle is the glass after you cut the bottle. Would the bottom section be as strong as a regular drinking glass for example?
4:20 you put 20 screws haha with three was more than enough. The glue grips the screw very well just to keep it from moving. Cheers
Excellent! Thanks!
Nice video
Fantastic vid
have you thought about using a hot wire (foam cutter ) to heat the score in the glass
+William Castleberry nice idea, I may try that in the future
Thanks for sharing video.
This is great, but----I dont understand what you're using to actually "score" the glass. I never saw anywhere in the video where you show the metal bit that was placed in the hole.
wendybird h Its just a standard glass cutter you would get from a hardware store
projectmayhemUK Thanks. Good to know!
Very helpful! I will try this later.
Good video!!
Good job! :)
Pretty cool stuff, thanks!!!
Very nice video
As an Irishman I read the Vodka label " Tesco EVERYDAY Vodka " and I naturally assumed that this was the recommended dosage, Jayzuz it's great stuff but I can't grip the bottle cutter at all LOL ! Great video only kidding ( I actually drink Everyday whiskey )
Phil Bebbington recommended dosage? I never though of it that way, very funny
Sand it and make a polish varnish your nice bottle cutter.
How to make your cutting table...can u share video
Good idea.
So cool Thanks!
best bottle cutter design in the tube. Tesco´s vodka is poison, mate, I hope you got it for the guests!!
Thank you for your comment you are so modest ps your not wrong I had a fuzzy head after I polished off that bottle
What did you use to score the glass?
I am interested in your work desk model.
Can you tell me about the design form? ...
Thank you for your lovely comments
projectmayhemUK
projectmayhemUK
projectmayhemUK SPIERDALAJ
@@kupakupiec1586 loucasi seja Deus
Nice , I like to ask is it possible blade which called diamond cutter possible to make at home
Señor buenos días soy del Peru y soy aficionado ,lo felicito por su ingenio pero seria bueno que pudiera las medidas para poderlo hacer o no quiere que lo copien
Muy bien proyecto felicidades pero no tires tanta agua ya que en muchas
s partes hace falta
easy
with those all tools!!!
Y para reciclar el agua!...... Un motor de vuelta ¡de esos que utilizan para fuentes!.
You are like a human Saw Zall. ! ! ! :-)
Harold Westrich You should see me cut a hedge
Interesting stuff. Subscribed!
Hi
Creative! :)
how did you install the glass cutter
it just slots into the holes and when it is in the vice that holds it tight
a little overkill with the screws dontcha think?
I would love to get more info on the "BottleBot", how, where, when,?
Saludos me podia decir un mas o menos las medidas de las tres tablitas de largo el largo del palito que entra en la boca de la botella y cuantos rotos le hizo a la tablita para poner el corta bidrio muchas gracias por su atención
hello, do turn off the water after its done. dont waste water
interesting. would like to see the actual cutting part what is it. Looks very interesting.
www.toolstation.com/shop/p50639?table=no
Hey. I am ashamed haven't paid attention at the beginning and didn't understand how it was installed. Now got it. Thanks.
Fantastic ! Thank you..
amazing bravo
great video !!! you really and good at wood work I am going to try this thanks mate... cheers☺☺
I am going to have to make one of these, thank you for the diy!
hai
I ordered a bottle cutter from Amazon and got it before the video ended.
excellent
Good IKEA project ..
it's s very convoluted way of cutting a bottle. watch other RUclips vids and make your life easier !
what glass cutter did you use?
+Eddie Van Antwerp bit.ly/1SQsoB6
Nice, Thanks!
Hi awesome , do you sell these and if so do you have a selling page please I don't have the tools to create this but I'm interested in purchasing one . Can the glass cutter be moved to a lower position ? Thank you , Miriam
While I appreciate your belt-and-suspenders approach with the screws+glue, you would almost certainly get by nicely with glue and maybe a couple screws each side of the cross-piece.
that’s what I think
Ill be using oak.... For longevity
I’ll try make one thx
No será mejor meter la botella en una fuente con agua. Tanto derroche de agua me hizo llorar.
class ideas.
Some nice technics but you can find better projects ☺️
Did you use acid to heat the bottle..Which?
hot water
Perdón, no mostras como se pone el corta vidrio 🤔
Groovy
sooo coool
Buen video,podria hacer tutorial en español ?
great
thanks sir
Genio
Good, but the water is gone.
Nice bottle. Tesco vodka. ;)
Very good sir. i'm going to have ago my self.
Criativo
Na filmie to ładnie wygląda mnie się tak nie udaje, ciągle mam postrzępione krawędzie cięcia i potem trzeba harować na papierze ściernym.
Muito difícil, prefiro barbante
Genial!!! Thank you :o)))
What a waste of good drinking water
brill
Wait ! You didn't use putty this time when you heated the scribe on the glass with hot water, so your not staying to the
instructions of your first video on how to cut the bottle.
+Robert R I only need to use putty on a bottle with thick glass or the
crack will go of the score line, not needed on thin glass bottles
Why do you want to cut bottles up? I honestly don't get this.
Don't waste the wather! Please!!
👏👏👏👏👏👏👍