Thanks so much for sharing the TSI! I really enjoy your tracks and can't wait for parties to start up again. All the best for Christmas and a good 2021.
Firstly great video, I have a question regarding using the x96 with 4 tracks in Tracktor and Machine… would you be able to use the two channels on the left of the mixer with the send and receive ? If so can you elaborate? Thanks in advance.
Thanks for checking out the video! Great question! Yes you can, you would just need to route the audio output from Traktor into the return channels on the left side of the Zone mixer. I believe they are 1/4 inch cables, so your extrernal audio interface will need to have those, I don't believe the 96 allows for the send/return channels as outputs on the internal routing in tractor when plugged directly into the 96 via usb. So you would need to use an external audio interface with 1/4 cables. Hope this helps!
sorry to be offtopic but does anyone know of a way to log back into an instagram account?? I was stupid lost the account password. I appreciate any help you can offer me
@Ridge Ahmed i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff atm. Takes a while so I will get back to you later with my results.
Like the K2 mapping I have one and trying to find a good mapping.... but also seen the effects done on the xone 96 mixer and I would think the sound card on the 96 is way better than the K2... but your mapping is great cause you carry a K2 with you and the setup is a lot easier in a club and just plug into the house mixer... BTW thanks for the mapping with Maschine also have a MK3 that is just sitting there
Thanks for checking out the video! Yes I agree with you about the audio card in the 96 vs the xone. Its good to have back ups and redundancies when your using a laptop setup like this. Enjoy the mapping!
Hello my friend, I've tried it now, but I can't manage to integrate my K2 into machine 2. I have the MK3 controller and have the same goal as you, to control the effects from machine 2 with the K2, but I can't do it. That's why I want to sell the Mk3 and work with Ableton, because it's much easier to map, but I actually like the MK3 controller. If you could make a video of how you did it, I'm sure it would help a lot of people who want to do the same. Cheers!
Video & Setup 💯‼️💯‼️,Thanks for sharing
Thanks for checking it out! Glad you like!
So cool. Thanks for this. +1 on all platforms.
Glad you liked! Thanks for checking out the video!
Love the vid keep up the great work being at the Apex of technology
Always pushing the envelope and staying at the edge of tech!
This is a dope setup! Loved watching you play at Bar Standard in Denver!
What's up brother! Thanks for checking out the vid! Need to get back to Denver asap! That was a fun night!
Thanks for the tsi, much appreciated
Thanks so much for sharing the TSI! I really enjoy your tracks and can't wait for parties to start up again. All the best for Christmas and a good 2021.
Thanks for checking out the vid! Thanks for the support!
Nice. Very compressed, intuitiv & max. failsave on stage. Look like fun! Thanks for sharing your technical stage workflow. :-)
No problem! Love sharing knowledge! Thanks for the support!
Really interesting setup, thanks for the walk through and mapping
No problem! Anytime! Thanks for checking it out!
Thank you very much for this great video, I had been looking for something like this for a long time👏
Glad you liked it! Thanks for watching the video!
Love It.
Great Job showing your mapping and thank you for sharing.
All the best🤙🏻
Appreciate the kind words! Thanks for watching the video!
Hola sian que tal ? Queria preguntarte como has mapeado maschine con los knobs buttons de la k2 un saludo
Thanks for the Data man!Great video!Thanks for letting us the map of the K2.
Anytime man! Hopefully it gave a little insight into my setup a bit more for everyone.
Amazingly well explained. Thank you!
Glad you enjoyed! Thanks for checking out the video!
Hi there, thanks for sharing all the info!
How do you alter the bpm tempo in this setup with no fysical decks? Do you do it in Traktor?
Thanks for checking out the video. Yes, you adjust bpm within the Traktor software.
Like this setup
Great video and set up but how are you transitioning from Deck A to Deck to B with no faders set up?
I use the fader and the volume faders on the external xone 96 mixer
Thanx for sharing
Anytime! Glad you liked!
Firstly great video, I have a question regarding using the x96 with 4 tracks in Tracktor and Machine… would you be able to use the two channels on the left of the mixer with the send and receive ? If so can you elaborate? Thanks in advance.
Thanks for checking out the video! Great question! Yes you can, you would just need to route the audio output from Traktor into the return channels on the left side of the Zone mixer. I believe they are 1/4 inch cables, so your extrernal audio interface will need to have those, I don't believe the 96 allows for the send/return channels as outputs on the internal routing in tractor when plugged directly into the 96 via usb. So you would need to use an external audio interface with 1/4 cables. Hope this helps!
can you please share how you map everything in Traktor and Maschine
sorry to be offtopic but does anyone know of a way to log back into an instagram account??
I was stupid lost the account password. I appreciate any help you can offer me
@Drake Kason instablaster =)
@Ridge Ahmed i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff atm.
Takes a while so I will get back to you later with my results.
@Ridge Ahmed it worked and I actually got access to my account again. I'm so happy:D
Thank you so much, you saved my account!
@Drake Kason no problem xD
Is this being in black and white so we have to guess what colors the led's are on the boards?
More vibes... lol
Maravilloso!
Like the K2 mapping I have one and trying to find a good mapping.... but also seen the effects done on the xone 96 mixer and I would think the sound card on the 96 is way better than the K2... but your mapping is great cause you carry a K2 with you and the setup is a lot easier in a club and just plug into the house mixer... BTW thanks for the mapping with Maschine also have a MK3 that is just sitting there
Thanks for checking out the video! Yes I agree with you about the audio card in the 96 vs the xone. Its good to have back ups and redundancies when your using a laptop setup like this. Enjoy the mapping!
Hi!
Is there a way to control the pitch from the k2 please?
Yes, you just need to map that function to any of the knobs within the Traktors device setup page
@@juheunthanks !
How do you set cue and scroll trough track and adjust your pitch ?
That can be found inside Traktors controller manger settings. You would need to map those functions to the K2
Hey I tried to get it work, but didn’t.
How do I get the k2 working with the Maschine?
Could you help me
You might need to adjust the midi settings inside of the Machine software for the midi to communicate.
@@juheun bad timing, 50 minutes ago I sold the @k2 😃🙈
Ha! That's my bad for waiting a year to reply to your msg lol. Apologies! @@Lasstmichinruh
Hi, congratulations. Can you tell me how to map the map in maschine at the same time as in traktor?
You have to open Machine standalone software and also open Traktor and run them both at the same time.
I am allready k2 taken,how to midi mapping with traktor pro
Hello my friend,
I've tried it now, but I can't manage to integrate my K2 into machine 2. I have the MK3 controller and have the same goal as you, to control the effects from machine 2 with the K2, but I can't do it. That's why I want to sell the Mk3 and work with Ableton, because it's much easier to map, but I actually like the MK3 controller. If you could make a video of how you did it, I'm sure it would help a lot of people who want to do the same.
Cheers!
hey bro hello , nice mapping , its available for mikro maschine mk2?
Yes, I use the machine mikro in my setup also, so yes it will work.
How do you loop? ':-D
I can’t even use my K2 with traktor. Let alone connect my 96 to it. Help ////
Weird?! What's happening? Why won't it connect?