CUMMINS ISX common problems - Freightliner Kenworth Volvo Peterbilt international
HTML-код
- Опубликовано: 3 окт 2024
- This common problems are based on my own experience with this engine.
No all CUMMINS ISX engines are going to present all this problems but at least they are going to have one of them.
This common problems are going to be similar all CUMMINS ISX engines from 2008 and up and all manufacturs: Freightliner Kenworth Volvo Peterbilt international, etc,..
Cummins ISX engines from 2016 and up are more reliable than older Cummins ISX engines.
____________________________________________________
Now accepting support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
Follow me on Facebook
www.facebook.c...
____________________________________________________
COMMON PROBLEMS VIDEOS: • COMMON PROBLEMS VIDEOS
DD15 ENGINE common problems
• DD15 ENGINE common pro...
CUMMINS ISX repair playlist: • CUMMINS ISX repair pla...
DD15 ENGINE repair playlist: • DD13 DD15 DD16 ENGINE ...
__________________________________________________
Radio station: 96.7 FM Kcal rocks IE
#franciscoamaya #franciscoamayacumminsisx
Thanks bro. This worked for me. U called out everything I've had problems with! Crazy
Had 2 Freightliners (02-04)with Detroit engine with over million miles and no mayor engine issues at all, then I decided to trying 2011 Kenworth with Cummins ISX (568k miles) so far oil cooler was gone ($2500 repair) few months after bumm head gasket gone ($5,130 repair) and all made by friends local luckily NOT over the road thanks God!
My recommendation.... stay away of those reds, unless N14 old school Cummins, I’m trying to swap a 12.7L 60 series Detroit on my kenworth so dumping ISX to junkyard where is right place for them to be...lol
Thanks for the video 👍
Hi Edwin, what was the symptoms of the head gasket and the oil cooler ? I have high pressure on my reservoir and it overflows i change the air compressor and it still doing it
@@fernandocontreras4784 i think symtptoms of a fail head gasket is coolant in the oil, possible overheat, and usuallly when oil cooler goes bad it starts to leak oil in the coolant system, you will notice oil in the coolant reservoir.
@@brkbrk5205 Always thot a failed head gasket 'chirps' or shows leakage on the block. If coolant is in the oil that possibly the liners 'O' rings. High pressure in your coolant reservoir can be head gasket failing due to liner dropping.
Thanks so much for the video Francisco they are all wAys so helpful,
man... I wish I seen this video along time ago. Very helpful
They all have problems and sadly the epa keeps making them worse :(
Biden
Thanks for the video, I have a 2011 and i didnt know why the pressure was pushing back from oil cap and dip stick.
Also found that EGR plugging causes a lot of the grief, up to, and most especially, engine failure. Evidently annual cleaning of the system prevents most of it. What they sort of gloss over, if they tell you at all. This is for more than Cummins, a friend is going through this with 2 Mack engines right now.
Cheers
Thank you for doing this video... I have just bought a 1013 t660 with one of these in it... Ill be looking at all these things.
I had a Cummins ISX, blew #4 rod through the block just after 800k miles. The Pete in my pic... did a 3406E swap... couldn’t be happier
Adventures of Will and Shelby
Good
Very knowledgeable and very helpful. Thanks
Francisco knows his shit! Thank you for the video.
So thankful for you to take the time to make these videos.
Mis respetos carnal, muy buena actitud compartiendo informacion, Dios te bendiga!
I drove one 5 years. I didn't put a bunch of miles but never had any problems. It was bad ass engine. Lots of power no problem
Jimmy Herring I’m looking at one with 190k how many miles did you do on yours if you don’t mind me asking?
I will be buying a truck soon thanks for the advice really appreciate it
Keep up to great work on the videos
Thanks for the video very informative I've heard alot of bad information on the isx engines since I'm looking forward on purchasing my first truck no wonder I've seen a lot of cheap trucks on the market most of them have the ISX engines and they are 2015 and below models muchas gracias 👍 great videos great content very informative...
If you could do a more in depth video on the symptoms of these problems that would help me. I did know about the EGR cooler failure and heard it was an 80% failure rate within 280k miles but some of these other problems like the fuel pump, I would not know how to diagnose. Appreciate the video
They are prone to front cover oil leaks and rear flywheel housing leaks. Both are very expensive to repair.
How to fix a Cummins ISX15 CM2250: Basically convert it to a CM2350. How? Replace all pistons an liners with the APR pistons and liners to eliminate the horribly honed Chinese liners and carbon scraping issues. Install the steel plunger upgrade into the fuel pump, it's very easy, get rid of the ceramic plungers. Have the head resurfaced and all valves re-sealed with updated seals. Replace the oil pump. Replace the oil filter bypass valve with the updated valve which is less prone to sticking open. Replace the oil cooler. Always pressure test the EGR cooler before assembly. Now you've fixed the most problematic issues in that engine. These problems are more specific to the CM2250. The next best fix is to get a Detroit. The EGR is the primary killer to the ISX engine, it is what creates the carbon issues. Also liners in the CM2250 were cast in China then sent to two locations in the US for honing. One of those locations used three stone hones and caused oblong surfaces, these liners will cause piston/ring failure. It''s a 50/50 chance cm2250 liners went though this honing process.
Dragon steel what's the cost to do everything you mentioned to convert to CM2350
15,000😂
How about the cylinder head and valves??? Does apr brand make brand new cylinder head or reman?
@@StickNclutch APR is a type put out by cummins vs a brand.
It is a very interesting advises you mention. Thanks. I have a casacadia 2013 with a cummins isx 450 hp. It has 500 k miles o it. It allready fail the EGR valve. But general speaking I'm feal fine with it. As maintenance what you suggests.
i am a big fan of your channel,thanks for your videos,muchas gracias
Vic Med ; Orale Vic , yo tambien miro tus videos , grscias carnal , cuidado en el freeway ✌, saludos desde el area de Stockton y Modesto
This was absolutely a very excellent presentation.... Great...great job.
Mauricio está muy bueno el vídeo , pero seria bueno que lo saques en español también 👏🏼👏🏼
Aprende ingles
Aaahhhhh huevo
Soy de la Huasteca, Potosina,,,Teneek, Espanol, Ingles , Japanes, No es impossible,,, dedicale tiempo,,, muy buen video Sr. Mauricio,,
That's a great name for those big red boat anchors "Cummins ISX Common problems"
You are awesome man!! Thank you so much
Bad ass mechanic knows his stuff
Good video.
Thank you for the knowledge.
2005 volvo with isx 1.6 million miles overhaul around 1150000 running no leaks no issues never let me stranded onthe side of the road
Thanks Francisco I'm buying a 2017 prostar with cummins isx15 428k miles. The engine runs smooth and the engine oil is even clean/clear
Try to look for Detroit engine 60 either freightliner or kenworth...
Pro star are questionable...
Estaría padrisimo que lo hicieras en español, siempre veo tus vídeos y siempre aprendo algo nuevo
Saludos desde Aguascalientes mexico
Pero Francisco suena más como si fuera hablando en ruso
Thanks......couse.l like the cumins motor...
saludos fransisco ..podrias hacerlo en espanol..gracias..
Thanks for the info 👍🏻👏🏻
Brother you the mannn thanks for you video save me a lot money one again thanks
Good video, keep up the good work... Thanks bro
Good video good teacher and good mechanic
Thank you!
300k the engine breaks? 50k miles???? 25k-30k engine oil replacement? Take this from an expert in oils..no matter what oil you use after 10-12k miles it will loose all its properties. All oil manufacturers tell u stories but won the you All Of Them are using same base oil. 80% of oil composition is the same between all brands, the rest 20 % are patent formulas that make their oil different than others .Advice to all owners :No matter what oil u use dont run over 12k miles no matter what oil. Dont be cheap in saving money on oil...thats the life of the engine...how many oil changes do you need to skip to save 20k dollars on an overhaul? Be cheap on different parts but not on oil 12k miles top...no matter what oil u use
So you expect me to get an oil change every 3 weeks??
In Europe, new Mercedes Actros has oil change in 120 000km! That's factory recomendation! Older Mb Actros mp2 has oil change in 80 000km!
@@sergeantspeed5941 pretty much i change it 1 month
LMAO you can use rotella T6 well past 12k miles. Changing you oil filter is more key than the oil @ 12k or so. You can send samples of your oil to a lab and you can tell when you should change your oil, along with many other things the sample will tell you. Some can go 50k miles with just changing filters. many factors play into why/when you should change your oil. I think I'd stick with science over some random word.
@@pokerman9108 ima tell you like Roger Mayweather told people who knew nothing about boxing and use his line "you obviously know nothing about trucks and main bearings" when u just replace the oil filter you are leaving all that contaminated oil at the oil pan which is going to contaminate that new oil filter as soon as you crank up and oil pressure starts to build. Don't be a lazy mechanic with a buttcrack showing just flush all that old oil and filter with new fresh oil and filter. And don't forget your davco fuel and secondary filters
2014 and 600k miles running strong here!!! Preventive maintenance and Change wearable components, this engine will last
Muy informativo. Muchas gracias.
Francisco got it right on the oil consumption. Im adding a gallon every 2 weeks and thought it was due to pushing the engine to it's peak daily.
sorry to be so offtopic but does anyone know a method to get back into an instagram account..?
I was dumb lost my password. I would love any tips you can give me
@Ryker Lennox Instablaster ;)
@Milan Melvin Thanks for your reply. I got to the site on google and im waiting for the hacking stuff now.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Milan Melvin It worked and I now got access to my account again. I'm so happy!
Thanks so much you saved my ass!
@Ryker Lennox no problem =)
Thanks man keep it up!
I have same truck like in your video a 2016 Pete 579 and at 200k miles already replaced turbo actuator... my mechanic told me those engine from 2011 to 2015 are very problematic and really expensive to fix them because it has a very complicated systems, like camshaft...
Hola
Francisco apenas empecé a ver tus vídeos y son muy buenos, saves quiero una recomencion me das
Thank you Francisco for the information
Great video, thanks for advice brother keep it up 👍
Gracias pero no tengo un Cummings tengo un caterpillar c15 🤣🤣🤣😁 gracias por ayudar Francisco 🇲🇽👍👌
Avem cumis5.9dt
I’m bout to buy a 2012 and seen this video
Where is your shop at to take a look at it
I have a 2007 isx Cummins 1.3 million miles i change the oil every 25,000 using conventional oil engine still has no blow by or low oil pressure problems.
Jeffrey Weston do You know what engine He said he preferred?
Jeffrey Weston I have a Freightliner 2012 with a Cummins engine and my stop like is on and it won't rev up past 1000 rpm can you recommend anything
Robert Vaughn I had a client with a similar problem, it could be DPF related problems, the SCR sensor, or even a fuse! My guy had a simple fuse that was messed up and once he replaced the fuse, the truck was running smooth
Thats an older dohc isx, those weren't as problematic as newer sohc ones
Lucky man
I like your video, Francisco. I have had two Kenworth with the ISX15 engine and haven’t have this issues you mentioned yet. On the first one, I put almost 500,000 miles till I got involved in an accident. The second one, is a 2015 and this one I got it used with 474k miles, now almost 500Kband. I problem at all. I personally like Cummins no matter what, they are, as you said, strong and reliable. I like it. Keep on doing the good work, blessings.
Ps. Where is your location. I go 48 states and I might need your services, you never know. Thanks.
Great. Video brother I am a journey man heavy equipment mechanic. With seven years of experience and is looking to upgrade like your videos keep. It coming learning a lot God. Bless you
Great video man your knowledge is welcome.material
Thanks Francisco. I would like to recommend Baldwin Crank case filter # CV15000 over the other filters available. It appears that this filter manages better the crankcase pressure over the other designs available.
Great video brother im ready to buy a Volvo with the isx
Francisco!
Can I bring my truck to you?
Great video bro
Good advice thanks
Thank you
You need to zoom out occasionally; don’t know if it’s the left side or right side 🤔
So basically everything fails on a cummins isx engine? 😐
I don't say that everything fails, I just say that Cummins ISX engines are expose to have at least one of these problems.
Cummins has a very good engine platform, the most common problems I see at the dealership is drivers don’t change fuel filters when they are suppose too. Most drivers ignore check engine lights. And keep on driving. Fuel pump parts have been improved due to the ceramic plungers breaking, they were replaced DLC plungers ceramics were breaking because oil change intervals were being ignored. Maintenance intervals are listed in owners manual follow them
Yeah it’s only 2010 to 2015... it’s that emission shit my 2007 t6 has almost 1.2 mil and hasn’t been touched internally! Have had sensors and egr and cooler replacement but still runs pretty good still
Saludos! I keep getting a low coolant code and an ambient air temperature code... any tips?
Oj M hey try replacing low coolant sensor first that’s cheapest thing to do...sorry can’t help ya with the air temp thing!
Cummins isx 15 powerful engine I ever drove . 2011 Cummins isx 900k still running great with no issues. This engine is very reliable best option in market. All you new guys reading comments and trying to decide best options b/w Detroit, paccar, D13 Volvo . Go for Cummins engine with peterbilt or kenworth.
I've been driving cummins for a while and it doesn't have major problems... The main problem is the oil consumption...
Zibotey Sly like I said Cummins is best option in market. Every engine has issues when it has to work 3 times hard due to DPF Cleaning. Yes I agree Cummins burns oil very quick due to engine oil temperature goes extremely hot during regen but if engine consuming like 1 gallon every 5000 miles consider as normal. look oil consumption chart on Cummins website it’s all normal.
Great video So what do you recommend to buy all this engines has multiple problems?
Great video
Great info
Gracias por el tutorial pienso que el EGR COOLER se me comenzó a dañar. Puedo correr hasta poder llegar a mi terminal siempre y no le falte coolant ?
Your the man
N14 , last and best Cummins engine
Dal P as a cat guy, can agree!!
First gen isx is good
You got it...my 2,500,000 miles now
Good music selections!
on my dd15 engine I had the air compressor failure that caused blow by to come from the crank case vent tube on the engine, it looked like i had a engine problem but it was a compressor problem where part of the air being produced from the compressor was going passed the compressor piston into the crankcase of the engine, i new i had a compressor problem due to it being slow to build air but i didnt know that it would pump air into the crankcase of the engine. I put a new compressor on and I had no more blow by from the crankcase vent tube.
most of the engine problems on the newer diesel engines is because of all the emissions garbage on these engines alk brands
En espanol wey!!! Jk good informative video.
What would you recommend
ISX or DD15 and what year?
I appreciate the help
good video bro.
Tremendo video Francisco Saludos Desde Canada I won't buy a Cummins I will stay with my cat
Tengo un isx 15 con falla... Cuando la presión sube a 2mil funciona bien... Al mínimo se baja la presión un poco y falla
Francisco, I have question, when you say that cummins 2016 year and up is better, do you mean truck is 2016 and up or we have to look at date which is on engine cover? Bcs ussualy if truck is 2016y, on engine says 2015.
Thank you
So on Cummins isx label should say way make in 2016 ?
The 2019 Kenworth 312,870 miles with Cummins engine.
2018 Freightliner 348,817 miles.
Which one would be good investment?
2014 electrical problem windows and volts gauge will stop and if u unhook battery it will start back
Only problem with Detroits is the dealerships can't figure out how to fix them. If you want to keep returning to the shop over and over for months just to fix a stupid code that keeps coming back, then yeah, Detroits are for you.
Hey good info, I got the high oil pressure issue with my 1mil 2012 kw with 2010 isx15 it don't burn any oil I do change oil once a month
I have just replaced a head top, and since then the oil pressure is low. I have replaced the oil pump and oil sensor but the problem is still there, how can you help me?
THANKS FOR YOUR BLOGS
Where is ur adrees
Do you have any video how to replace the fuel pump on isx cummins engine for 2012?
that is a mechanic job trust me, the pump weights 70-80 pounds itself lol
Que sensores necesitó cambiar antes queden problemas tengo un 2017 kw T680 con 160000 gracias per su ayuda muy buenos videos!!!!!
Antonio Arroyo eliminale el mugrero d las emisiones y levantale el caballaje a 550 y te quitas de andar batallando despues
Buenas. Me gustan todos tu video.
Como es de bueno el 2009 isx 15 con 425 hp. Gracias
Hey thank you so much brother. I really appreciate your videos. Now, do you have any video where you can explain, overall, which engine is better on a 2013 to 2015 year truck, Freightliner or Kenworth or Volvo. Those are my options. What do you think ? I'm trying to buy a truck
I would assume ISX would be first choice theres nothing else out there that i can think of.
Kenworth inmo
Our 2013 isx 15 has been nothing but problems. Engine failure at 500k. Our new updated 600hp isx has been very good so far but only ~175k miles on it so we'll see. These new emissions engines are just plain junk.
Allen Seferagic You In California ? I’m planning on buying my first truck a 2015 T680 @ 500,xxx miles .. or I’m trying to figure out how I could buy a new truck
@@jessehussle4883 I'm not in Cali and very glad I'm not. Our truck is now fully deleted and runs so much better. I could not recommend any dpf equipped truck to anyone its a horrible financial decision. If you're looking into a new truck look into Glider kits.
Allen Seferagic I’m in California brotha, that’s the thing.. gotta follow the rules
@@jessehussle4883 I'd say your best bet is to lease a new truck. Trucks don't last choked out and running costs are too high. Being an owner-operator can be tough especially if you have a truck payment on top of it.
Allen Seferagic thanks for advice Allen I’m going to look into it later today at my local dealer
Many people are having #6 cylinder,valve problems in a Cummin's ISX engine. Have you seen that problem? can you explain it? Like you said, most problems in ISX15 engines are found in engines from 2007 to 2015, like the #6 valve malfunction. thank you.
Buenas tardes, en donde esta su taller?
Fransisco una pregunta tengo un volvo 2007 el air dryer esta liquiando aceite sera por que el compressor del aire esta dañado
Talvez el filtro esta muy sucion
Francisco if you can help me giving me some advice. I am getting ready to buy my first truck and I am still not sure which engines are better a Cummins or a Detroit . Let me know please
At 12:10 you say you prefer an engine over the ISX engine but I can't understand what you said. What engine do you prefer over this ISX?
He said he prefers DD15 engine
Cual es la presión del motor, mi aguja me muestra 223 a 225 corriendo y parado 200 mi motor es un dd15 Detroit, te agradezco su ayuda tengo la amber light on, saludos Francisco.
Buen video mr si tienes change as alguno parecido pero para un isx 400hp 2007
Exelente explicación haser ca de este motor hermano mire una pregunta que motor me recomienda ponerle a un pro star 2012 trae un max force 13 que ya camino muchas gracias espero su respuesta
Un Cummins isx estaria bien
I do my oil change every 10k &
Replace oil and fuel filters.
Air filter every 30k
Crankcase every year
750k miles later not a single problem on my Cummins isx 450
So basically oil change every month? Lmao wow
Cummins recommends 15,000 mile oil change for severe duty on my ISX15. So I start off doing mine at 12,000 miles for the first year then quickly switch to every 8000 miles after learning about how quickly the oil gets contaminated with carbon and soot. Oil changes are cheap maintenance when you do them yourself. I’m at 240,000 miles so far with no problems but I still have low expectations with these new motors
@@jbaby215 hey Jerry 2 buckets at home depot for 11 dollars and a torque wrench and you can change your oil yourself for free at no cost.... Save yourself 40,000 dollars on a brand new zero mileage engine
I’m currently looking at 2014 freightliner with a isx 550k miles would you recommend something like it or stay away from it ?
Francisco
Should I sell my 2015 freightliner with cummins isx 15 engine and buy a newer one? So far I do not have any issues with it. But after watching this video I worry.
Buenas noche maestro mi nombre es Ramón Rodríguez y soy un fiel admirador suyo, muchas gracia por la gran ayuda que nos ofrece.
Acabo de hacerle el motor a mí camión un dd15 del 2013, siento todos bien, con todas su fuerza, pero siento un mal olor muy fuerte a diosido de carbono y el Mecánico me dice que los corra que ese olor se les va a quitar ya he corrido 1200 millas y sigue igual, porfavor necesito saber que usted opina, le estaré muy agradecido por su opinión y que los cuide y proteja siempre al juntos de todos su seres queridos.
What if it’s leaking diesel out of vent tube hanging from bottom of engine
That could be a problem with the fuel injectors orings
Estaría padre que lo hicieras en español 😢