Making a Soap Cutter
HTML-код
- Опубликовано: 27 сен 2020
- I Make a Soap Cutter for @ezervanna. The soap cutter is designed to cut large 600 x 400mm blocks of soap into smaller pieces. The cutter is made from plywood and uses 700mm full extension ball bearing drawer slides, guitar wire and guitar tuning pegs.
/ wrkshop71
/ ezervanna
To access the free project tutorial for this project and others from my Channel. Visit the link below:
wrkshop71.com/project-tutorials/
Materials list
---------------------
18mm Laminated birch plywood:
2 pcs 250mm x 230mm
1 pce 552mm x 135mm
1 pce 414mm x 50mm
15mm Plain birch plywood:
1 pce 552mm x 55mm
1 pce 900mm x 516mm
2 pcs 725mm x 50mm
1 pce 750mm x 513mm
1 pce 600mm x 30mm
1 pce 414mm x 35mm
2 pcs 640mm x 50mm
1 pce 554mm x 250mm
2 pcs Ball bearing Draw slides 700mm full extension sliders.
1 pce of 7mm nylon cutting board 380mm x 25mm (The thickness can vary depending on what is available in your location)
4 pcs Electric Guitar tuners (These are just generic tuners I bought off aliexpress)
4 steel electric guitar strings PL016 or PL018 which are 0.016 inches and 0.018 inches in diameter which in mm is 0.41 and 0.45 respectively. 
Хобби
Very Smart turned out very nice
18-minute demonstration of your wood working abilities. Nice soap cutter.
Fascinating, no idea that these are so labor intensive.
This is fantastic! That you for sharing and making this video!
Your welcome. Thanks for watching. If you're interested in making one my website has a free tutorial for the soap cutter project. wrkshop71.com/project-tutorials/making-a-soap-cutter/
And yet I just spent a week making a simple one that uses fishing line tied to a washer that is fitted into measured slots and this man makes this in one day!
Thanks for the video. Learned a lot.
It took me more than a day. But I guess if you had all the materials at hand and everything worked out on paper or in your head you could do it in a day.
Küçük bir fark var.O bir profesyonel
Very professional!
Excellent craftsman work. I would love to have one of those! Thank you for sharing :)
Thanks for your video 🙏
Great job,, welldone 👍
good job Pauly
Well done
Very impressive
Merci beaucoup, thank you so much
Good Morning!!!
Your soap cutting machine is very good. Congratulations.
But the wood cutting machine made with the portable circular is a show!!! Make a video showing the details of the machine and put it on youtube. Here in Brazil, amateur carpenters will love it.
Hi Marcelino, You can see the Circular saw crosscut jig video on my channel here: ruclips.net/video/2OUe1UaO1tQ/видео.html
Really interesting to watch and appreciate the materials list but would love to have a voice over teaching us each step. Very nice work though!
Hi Heather, I am currently building a website. On the website will be instructions and plans on how to build the soap cutter and other projects. The soap cutter tutorial will be free to access.
@@wrkshop71 that will be amazing!!!
Awesome Job Paul, love your work!!!! Keep up the videos!
OMG
I like your works its seem flawless .in indian rupees including shipping how much will it cost bro.?
Hi, Shipping to India from northern Europe would be expensive because the cutter is quite heavy. I can make the cutter for €300 Eur plus shipping which I estimate would be another €300 or possibly more. My website has a free tutorial on how to make the cutter. wrkshop71.com
Instead of using Guitar strings can we use Steel blades please give your suggestion I have used wire cut string but it is breaking very frequently
I have not seen a soap cutter with steel blades they all seem to use wires. Perhaps this is because blades create too much friction because the soap is somewhat soft a wire cuts through easier. But I am not a soap expert. Usually heavy gauge steel guitar strings work well. The strings you see in this video were too light. They have been replaced with heavier or thicker guitar strings.
Could you perhaps give measurements and maybe explain a little about how to construct and assemble a bit more please🙏
Hi Daphne, The materials list with measurements is now in the video description. Also I am building a website which will have instructions and plans available.
Me gustaria comprar ese cortador con su rrespectibo molde como me comunico
Please make Mr. Sami Auto Sup Packing Video?
What kind of wood did you use for it?
Birch plywood. The plain plywood is 15mm thickness and the laminated(brown) plywood is 18mm thick.
Hi are you located in the UK ?
No, I live in Latvia
Please share materials, the wire and where to buy it.
Hi Gilad, The wires are plain steel electric guitar strings PL016 or you can use PL018 that is 0.016 inches or 0.018 inch diameter. Which corresponds to 0.41mm or 0.45mm . Most musical instrument shops will stock these guitar strings or you can try amazon or ebay etc. I will post in the comments a materials list.
Visit wrkshop71.com to access the free tutorial for this project.
List of materials for this project:
18mm Laminated birch plywood:
2 pcs 250mm x 230mm
1 pce 552mm x 135mm
1 pce 414mm x 50mm
15mm Plain birch plywood:
1 pce 552mm x 55mm
1 pce 900mm x 516mm
2 pcs 725mm x 50mm
1 pce 750mm x 513mm
1 pce 600mm x 30mm
1 pce 414mm x 35mm
2 pcs 640mm x 50mm
1 pce 554mm x 250mm
2 pcs Ball bearing Draw slides 700mm full extension sliders.
1 pce of 7mm nylon cutting board 380mm x 25mm (The thickness can vary depending on what is available in your location)
4 pcs Electric Guitar tuners (These are just generic tuners I bought off aliexpress)
4 steel electric guitar strings PL016 or PL018 which are 0.016 inches and 0.018 inches in diameter which in mm is 0.41 and 0.45 respectively.
Do you happen to have the specs you used?
Hi Scottie, Some of the measurements I remember but I need to visit the customer and take some measurements so I can post a full list of materials as I didnt make any plans before I started the project. The ball bearing draw slides are 700mm full extension slides. The cutter is designed to cut 600 x 400mm soap blocks into 5 logs. The laminated plywood(brown) is 18mm laminated birch plywood. The thinner plywood is 15mm. The guitar strings are steel guitar strings PLO16 or you can use PLO18 which are 0.45mm dismeter. The winders are electric guitar tuners.
how much?
€300 EUR plus shipping.
Cuantos custa
300 Euro plus shipping.
Hii
How much will you charge to make one for me...
Hi, If you are located in Europe it is possible. But if you are outside Europe the freight for such an item would be too expensive. It would be cheaper for you to find someone locally that can make one for you. Soon my website will be up and detailed instructions on how to build one of these will be available.
A vídeo to show how to cut wood, to drill says nothing to me.
Where are you from. Im Brasilian my names NUNES. I make soap.if possiboll id like to have your meterr
Hi Nunes, I'm from Latvia.
Way too completed for the average person. It looks great though!!!
Hi Jake, I'm not a professional I would say my skills are average for someone with a few tools they use in their spare time. When you see every step it seems complicated but nearly everything is screwed together there are no special joints etc. So I think its a fairly simple design for what it does. Of course if you need a soap cutter like this one I made in a hurry you can buy them for about $400 USD. But those designs do not use metal draw slides.