mountune Mk8/8.5 Fiesta ST / Puma ST Carbon Fibre Induction Kit Installation Walk-through
HTML-код
- Опубликовано: 13 сен 2024
- The mountune carbon induction kit for Mk8 Fiesta ST (pre- and post-facelift) and Puma ST includes a beautifully designed high-flow carbon fibre assembly, which combined with its natural heat-resistant properties and the large dual-entry air filter provide virtually un-compromised airflow to the 3-cylinder Dragon engine.
For those installing this kit themselves, follow this installation walk-through for the easiest method of getting up and running fastest.
www.mountunest...
#mountune #carbon #inductionkit #fiestast #pumast
Nice looking induction kit, bet it sounds great 👌
Thank you - It certainly does!
@@mountuneofficialI would like to hear what it sounds like on a mk7 st. I had an itg and hated the sound. Is this a more subtle sound?
Amazing wish this was for the Mk7 too!
It has been released for mk7 now.
I'd love to get one of these for my 8.5 fist but the extra cost from your airbox offering equivalent is basically double! Only just purchased the intake pipe and a few other items and that was break the budget!
We downunder always get the rough end of the stick!
I understand costs etc but wow it's expensive to purchase through Mountune Australia!
Wowww💪🔥👍
Will these ever be available again?
❤❤😍😍👍👍
Great kit, but nowhere in the video is the secondary hose shown. how it attaches, where to position it down below, etc.
Hi Iain, it sits above the undertray behind the fog light as this is a low-pressure area - for optimum performance, we also offer an Auxiliary Cold Air Intake (ACAI) for Mk8 Fiesta ST owners and in this scenario, you would connect the air feed to the other end of the air feed on the ACAI.
@@mountuneofficial nice one, cheers. Might get this to to with M260. 👍👌😀
is it also good with the completely stock car?
Will this fit a mk8 1l st line ?
what make is the tool u use to unscrew them screws...
How to clean this filter the easy way?
No stock 😭😭😭
When you doing the same for the Mk 4 Focus ST ?
It's in development currently, we're not leaving Mk4 ST owners out, don't worry.
@@mountuneofficial awesome 👌
Focus mk4 1.5 can install?
Does the stock intake hose fit ?
Yes, you can use it with the OE intake hose, or our high-flow silicone option.
@@mountuneofficial and does the filter have to be oiled or not?
Revo kit sounds better
I don't believe that you would even know that!
@@JUSTADRUST watch RUclips
It's hard to tell subjective things like that recorded via different microphones, which are then being played back on different speakers (usually tiny ones on mobile phones that can't reproduce the mid and lower frequency properly anyway).
Where it matters is in the real world and all of the owners who have fitted our carbon induction kit so far absolutely love the noise it makes, its looks and the performance gains... that's all that matters to us ultimately.
You do know Mountune are working with ford so if you do there mods your less likely to fail mot for not having a stock filter on
@simpleplan123ful Incorrect. Mountune are not working with Ford, FoB&I or FoE. The agreements were terminated some time ago now.