Replacing LEAKING Micro Channel Coil In A DUCTLESS Mini Split | HVAC Repairs

Поделиться
HTML-код
  • Опубликовано: 5 ноя 2024
  • КиноКино

Комментарии • 108

  • @ghostface4072
    @ghostface4072 2 года назад +12

    I didn’t get something out of it , I got a lot out of it. keep the consistency going 💪 I know it ain’t easy but we appreciate every bit of it .

  • @pocketducks
    @pocketducks 2 года назад +4

    I would recommend purging out your gauges while your hooked up to the bottle so that you know your not putting the air in the hoses into the system.

  • @aamirprasalla
    @aamirprasalla 2 года назад

    Bro I would literally drive to Tennessee to meet this guy, he knows his shit very well. What at a smart dude.

  • @prestigemechanical3600
    @prestigemechanical3600 2 года назад +1

    I use that same bag. After many vetos and lots of others alike. I prefer that exact bag for all that it is.

  • @josiahpierson3636
    @josiahpierson3636 2 года назад +1

    Those samsung units are super quiet. Nice video Zac

  • @GotWire
    @GotWire 2 года назад +1

    I installed a mini split in my house a Della unit ever heard of that brand before? found it on amazon. Love your videos my the way I live in Oak grove KY near Clarksville TN

  • @antonsoldo3161
    @antonsoldo3161 2 года назад +1

    Nice and smooth job

  • @Thisismychannalnaja
    @Thisismychannalnaja 2 года назад +3

    3 screws that you mention. It will be easier to remove when you took the front panel off. Coz youcan access the screw that hold the metal sheet to the base. After that you can lift the coil and the sheet in one piece. Hope it help you next time ^ ^.

  • @CHRISDOESHVAC24
    @CHRISDOESHVAC24 2 года назад

    Really enjoy the quality of work and legit process you take really sets a good example for newer techs watching your videos !! Good job man

  • @giorgosktoridis903
    @giorgosktoridis903 2 года назад +3

    Is it worth it changing the condenser coil to a mini split?

  • @johnbennett3906
    @johnbennett3906 2 года назад +1

    Did you purge with nitrogen when brazing or un brazing?

  • @littlesid
    @littlesid 7 месяцев назад

    This video is a huge help! Thank you! May I ask what your torch setup is? Thanks again

  • @brianvargas5432
    @brianvargas5432 2 года назад +2

    Love the update on the videos 🤙

  • @CarlosEduardo-hh8qo
    @CarlosEduardo-hh8qo 2 года назад +1

    very good your services I always follow you from here in Brazil. I'm also a refrigeration mechanic hug 😃👍

  • @capitalductless4556
    @capitalductless4556 2 года назад +1

    I have done a few of these Samsung coils- any idea what caused this one? Also curious price on part for replacement coil.

  • @fredmiller694
    @fredmiller694 2 года назад

    Solid move writing total charge. wish more people would do so

  • @garza7676
    @garza7676 2 года назад +2

    Mini split should have been moved off the ground . Probably the reason why the coil was damaged from the weather . Besides that . This is actually the only video on the internet about replacing any mini split parts .

  • @petebell3060
    @petebell3060 2 года назад

    I’m new student, questions
    Before you brazed the coil , did you loosen a flair fitting to flow N to prevent OX from containment in your tubing ?
    Your Video wan not clear
    Thank you
    Pete

  • @deoranferguson5657
    @deoranferguson5657 2 года назад +1

    Nice installation

  • @maxapollo1
    @maxapollo1 Год назад

    Did you need to flow nitrogen when brazing for that coil ?

  • @TheDrumnRSM
    @TheDrumnRSM 2 месяца назад

    What’s the part number for the replacement? Mine is leaking. Thx!

  • @Dyllanes_Ingeniero
    @Dyllanes_Ingeniero 2 года назад +1

    Hi, GREETINGS FROM MÉXICO 🇲🇽 excelent, good Job. Im your fan. What camera 🎥 do you use?????? Because is Wonderful. Thanks

  • @MrSwaggerLlama
    @MrSwaggerLlama 2 года назад

    Any solid glove recommendations? Ones that will hold up but still allow dexterity

  • @JBra1382
    @JBra1382 2 года назад

    Always enjoy your content. You make it look easy enough for home owners. But we know when the camera wasn’t on. You threw something or said a choice word. Something didn’t want to line up right putting it all back together. 😁

  • @Eddy63
    @Eddy63 2 года назад

    Great little vid as always ... Thx for posting ...

  • @aubreysmith8752
    @aubreysmith8752 2 года назад +9

    Love your videos man but I would never do any brazing on mini splits without a low-psi nitrogen flowing. I don't want call backs one day with valve problems.

  • @omarfahil1602
    @omarfahil1602 2 года назад +1

    You best mann from turkey

  • @thefathvacguy6341
    @thefathvacguy6341 2 года назад +2

    Quick and easy great job

  • @kemuelpounall8740
    @kemuelpounall8740 2 года назад

    The box that u keep ur micron gauge and fittings where can i get one

  • @juanmelendez5042
    @juanmelendez5042 2 года назад

    How much is doing that service worth? How much is that 410A Refrigerant tank worth in your state?

  • @timdelgado9710
    @timdelgado9710 2 года назад

    Can you use they Klein ratchet as a service wrench?

  • @21Lettere
    @21Lettere 2 года назад +3

    Are you brazing without flowing nitrogen into the pipes?

    • @malcolmwhite821
      @malcolmwhite821 2 года назад +2

      That was normal 20 years ago. Lol

    • @21Lettere
      @21Lettere 2 года назад +1

      @@malcolmwhite821 no

    • @21Lettere
      @21Lettere 2 года назад

      @@malcolmwhite821 from the same author see ruclips.net/video/rEi7TlFEnIY/видео.html

    • @keehn20
      @keehn20 2 года назад

      Lol with micro channel I would never chance that

    • @TheBallerzinc
      @TheBallerzinc 2 года назад

      Definitely should be; Coil is not that big though. Brazing was done quickly. vacuum was probably able to suck out what little Soot there was.

  • @ivanramos8194
    @ivanramos8194 2 года назад

    Hola saludos desde Culiacán Sinaloa México. Dónde puedo comprar el manómetro regulador del tanque de nitrógeno baje usas Gracias.

  • @حسين-ج9ط7ي
    @حسين-ج9ط7ي 2 года назад

    Great job, thank you brother. You are so talented

  • @juanmanuelnieves3509
    @juanmanuelnieves3509 2 года назад

    greetings from the city of Carmen Campeche Mexico

  • @AndrewTa530
    @AndrewTa530 2 года назад +1

    Evacuate refrigerant first?

  • @clerklierbrush0869
    @clerklierbrush0869 2 года назад

    how do you leak check a ductless split system. They seem pretty hard to work on.

  • @darksabatta
    @darksabatta 2 года назад

    What brand core depressor is that

  • @diegolanda6397
    @diegolanda6397 2 года назад

    Can I be your helper for a day or a week? I live in Nashville and it would help me a lot in gaining more knowledge. I work as a new construction residential installer

  • @robertlamey7612
    @robertlamey7612 2 года назад +1

    What sucks is carrier and Bryant are both going micro channel Evap coil

  • @pablocarpio664
    @pablocarpio664 2 года назад

    Solid work

  • @Rayray_unicornplayz567
    @Rayray_unicornplayz567 2 года назад

    Do they last for a year?

  • @thesilentonevictor
    @thesilentonevictor 2 года назад

    Productive day

  • @i.r.mrefrigeracion9985
    @i.r.mrefrigeracion9985 2 года назад

    Usas nitrógeno o CO2??

  • @fastlife866
    @fastlife866 2 года назад +2

    Hate micro channel coils, haven't came across any mini splits with them yet. Where was the leak? I've had great success with solderweld aluminum brazing rods. Fixed a couple evaps n condenser coils with it. Even copper to aluminum. Great kit to have.

    • @lordjaashin
      @lordjaashin 2 года назад +1

      many cheaper mini splits in my country used to come with micro channel but almost everyone of them leaked within two years of installation. now no one wants to buy them so micro channel for mini splits is dying trend at least in my country.
      micro channel will work with low working pressures of r134a but it simply will not tolerate the high pressures of r410a & r32. many people will replace micro channel with normal copper coil in my area and they work really well without any leaks

    • @dantemariscal8679
      @dantemariscal8679 2 года назад

      Awesome to hear someone being a tech and knowing how to repair them. The solderweld kit is definitely a must have. It saves the customer money and you make the sale

    • @fastlife866
      @fastlife866 2 года назад +1

      @@dantemariscal8679 if the warranty is up, I'll give em options. If i can save em a few hundred why not. Plus it's hard to get some things right now as it is.

  • @stanzlifestyle1031
    @stanzlifestyle1031 2 года назад +3

    that brazing was pretty bad you didnt let it melt and flew into the connection its just on the surface

    • @gemrough
      @gemrough 2 года назад +5

      And no nitrogen purge while brazing…

    • @davidgallegos4771
      @davidgallegos4771 2 года назад +3

      It's gonna hold doesn't need to be pretty

    • @rodgraff1782
      @rodgraff1782 Год назад

      @@davidgallegos4771 standards vary

  • @coreymadden3650
    @coreymadden3650 Год назад

    what size tip are you brazing with blue flame looks long as shit

  • @sharjeelusman2406
    @sharjeelusman2406 2 года назад

    I am from Pakistan.
    I like your video.
    Sir. Your tolls is very 👍 goods

  • @shethbeans9716
    @shethbeans9716 2 года назад

    Hi sir Iam from india.I studied HVAC course (industrial training institute) I have more interested in this (HVAC) course. So i watched your's RUclips channel ,l liked your's work , good proper methods working and very neatness, good installation. Can i come for work? (training /helper) I did 1 year experience in india.

  • @pauls7505
    @pauls7505 2 года назад

    What is the big gray box mounted on the house behind the unit?

    • @SmitHVAC.
      @SmitHVAC. 2 года назад +2

      Rinnai tankless water heater

    • @fastzombie1
      @fastzombie1 2 года назад +2

      Outdoor tankless water heater

  • @special_k-hvac
    @special_k-hvac 2 года назад +2

    samsung and micro channel, a leak waiting to happen

  • @chrisk1180
    @chrisk1180 2 года назад

    Good stuff

  • @richardthomas1743
    @richardthomas1743 2 года назад

    Hello and thumbs UP!!

  • @AmericanFarmerHVAC2024
    @AmericanFarmerHVAC2024 2 года назад

    Microchannel would last with the old refrigerant, lower pressures. Can't handle the 410a. Scared of what r454b will bring. And now new carrier condensers are coming with outdoor aluminum coils 🤦

    • @Austin23191
      @Austin23191 2 года назад

      Is carrier going to R454b? I heard daikin is going to R32 and was hoping everyone would be switching to the same refrigerant

    • @georgekolos5255
      @georgekolos5255 2 года назад

      The lie was all Al micro channel coils would last longer than copper tube/ fin coils because no chance of formic corrosion to develop.
      Yeah we all know how long such coils last these days
      It's a shame

    • @AmericanFarmerHVAC2024
      @AmericanFarmerHVAC2024 2 года назад

      @@Austin23191 yep. Carrier is going to r454b. "Puron advance" carrier calls it. And I heard this right from our rep from our supply company.

    • @AmericanFarmerHVAC2024
      @AmericanFarmerHVAC2024 2 года назад

      @@georgekolos5255 big shame. We need trump back to reverse the epas bullshit. Keep the 80% furnace and go back to r-22. R-22 is the most beautiful refrigerant there ever was

    • @rodgraff1782
      @rodgraff1782 Год назад

      Micro channel is car radiator technology. Never meant to cope with the pressures of AC, due to the inability to flex without eventually leaking. Every one of those coils is a time bomb.

  • @ryandean6880
    @ryandean6880 Год назад

    I like that hat

  • @paulsilver1625
    @paulsilver1625 2 года назад +4

    Would have liked to see all the job not just the end. Seeing your pressures sub cooling etc. half a job shown on this video. Sorry.

    • @davedonahue7643
      @davedonahue7643 2 года назад +2

      Not sure subcool would be a realistic reading

  • @davidperry4013
    @davidperry4013 2 года назад

    Embrace the technology.

  • @davidrothstein4029
    @davidrothstein4029 2 года назад

    Awesome work. Don't see any gloves or safety glasses. Just saying. Love tour videos. Keep up the great work.

  • @Holler_Rat
    @Holler_Rat Год назад

    Are a lot of these mini split systems micro channel? I'm putting Samsung on the "Never buy" list.

  • @FlyEaglesFly19111
    @FlyEaglesFly19111 2 года назад

    All us service techs need to get ready to be replacing alot more.. its coming. These coils stink! They are not able to handle 410a. Maybe the new refrigerants will have lower pressures.

    • @malier7535
      @malier7535 2 года назад

      New refrigerants have higher pressures

  • @olytorres4499
    @olytorres4499 2 года назад

    I just sell a new c/u they cheap never had to change a minisplit coil in 13 years i had on the field

  • @soloch69
    @soloch69 2 года назад

    Great 👍🏻 video like always sir keep them coming

  • @ozziewelcome5612
    @ozziewelcome5612 2 года назад

    Kool Kool

  • @rajeetchand6589
    @rajeetchand6589 2 года назад

    Hello everyone if any of u guys want a solar consultant job let us know . We're expanding and we don't mind anyone who knows how to close deals. There will be competitive pay

  • @steveo7624
    @steveo7624 2 года назад

    Micro channel they leak

  • @AngelClimate
    @AngelClimate 2 года назад

    Все круто 👍 💪👌

  • @jcaleca60
    @jcaleca60 2 года назад

    Please wear safety glasses and gloves

  • @sparkyobrian6417
    @sparkyobrian6417 2 года назад +1

    oh its a samsung.... hey I found your problem.

  • @stephwaylonwells3218
    @stephwaylonwells3218 2 года назад

    👍

  • @jacobscyphers3630
    @jacobscyphers3630 2 года назад

    Well no one else is going to call you out on it so.....HACK. You didn't prove that you flowed nitrogen during the entire replacement. Take tsk. That dbag down in Florida that owns K@l0$ would not approve of your work.......anywho nice little 2.5 hr job

  • @s550wulf9
    @s550wulf9 2 года назад

    So, clean work minus a bunch of rookie mistakes…. First off, clean the area around the coil and the internals. Then remove the outdoor coil. You did not use nitrogen while brazing a huge no no while brazing and huge no no on a mini split. Be better bud…

  • @dbzssj4678
    @dbzssj4678 2 года назад

    Micro channel trash, they should only be running R134a.

  • @Electrician-x4t
    @Electrician-x4t 2 года назад

    🇮🇶🌷🌷

  • @jordenb9469
    @jordenb9469 2 года назад

    Throw away world. Garbage. Not even worth the repair.

  • @joshuaseaton4526
    @joshuaseaton4526 2 года назад

    Pretty sad state of affairs that you are there replacing this. We should be better as a country on the front end of technology. This foreign garbage shit pisses me off. We are so much better than this.

  • @TaRgEt0ZeRo
    @TaRgEt0ZeRo 2 года назад

    somethings annoys me in your video.... ah yes to much pub in them, tools are too cleans.etc

  • @561lyfestyle2
    @561lyfestyle2 2 года назад

    Goddamm aww man atleast clean the surface with your wet/vac and blow the surface clean everyone's see in this lmaooo this guy 🤦🤦🤦

  • @Christer885
    @Christer885 2 года назад

    👍