Beautiful result - also for the appearance, I think you did well to finish them. Now all I need is a fully equipped workshop and years of experience in wood-working...
Nice work. Now I can replace my old ones that I managed to destroy. These look way more solid. Like you, I also make a lot of my own gym equipment and personally I find that the equipment made properly with wood is a lot stronger than some of the steel equipment on the market. Keep up the good work 😉
I love the start of using the handsaw and switching to the bandsaw. I did the same thing when working on some poster frames. What the heck am I doing using a handsaw when I have a bandsaw?!?
Very nice! If I buy all the gear necessary to do that, I only end up having bars costin roughly 5000 € =) I will just try with a saw and some easy tools I have at home. very nice job man!!
Well done. I built a set of parallettes similar to the ones in the photos you used in the video of the expensive ones, the one with one screw holding it together. That design was actually ripped off from a German builder at Rawal who builds those parallels with a bridal joint holding the bar on the legs. I like your design though also.
Sehr gut,tolle idea Marius.İch da noch eine Frage zu deiner Säulenbohrmaschine,die scheint sehr leise zu sein.Kannst du mir bitte sagen welche Marke das ist und wie groß die ist ? Danke
Kemi Kemii Die ist nur so leise, weil ich alle Maschinengeräusche beim schneiden leiser mach. Vor allem wenn ich einen Text drüber sprech. Die ist sonst so laut/leise wie jede andere auch. Ist die Bernardo BMT 20 und hat einen Ausleger von 16cm also eine der halbwegs größeren. (bin zufrieden damit, würde aber heute diese Marke nicht mehr empfehlen)
Marius Hornberger Achso ist das,und ich dachte das sie ganz leise ist :-) . Naja da kann man nichts machen.Danke für deine Antwort,werde weiterhin deine tollen Videos verfolgen.
8:10 They are not safe if they slipper, I made a pair very similar to those, but added some rubber pads at their bottom face, so they really cannot move while using it.
Sehr geil. Allerdings muss ich mir erstmal das ganze Werkzeug kaufen. Meine Frau wird begeistert sein. 😂😂😂🙏 Wegen des PU-Lackes hätte ich mal ne Frage. Ein Kumpel von mir, selber Schreiner, meinte, dass die PU-Lacke problematisch seien was Giftigkeit angeht. 1. Stimmt das? Und falls ja 2. Löst sich das Zeugs durch den Schweiss? Ansonsten sehen die Dinger geil aus und Du könntest sie so wirklich vermarkten.
Nachdem der Lack großflächig für Innenräume gemacht ist, denke ich, dass das mit der Giftigkeit nicht stimmt, wenn er komplett ausgehärtet ist. Aber genaues weiß ich nicht. Lösen tut es sich nicht durch Schweiß, zumindest nicht bei so wenig Benutzung. Heute würde ich das Teil aber auch ölen, statt lackieren
The production on this video must have been hilarious. *shifts camera and light slighly* "Ok...butt lighting is now acceptable..." Did you notice any increase in your female demographic after this video? :D
:) well done, nice, and well explained. The hand stand was quite impressive!
finn127 Thanks!
Cool project, I made a pair of similar handles, a few months ago, but your version is much more sophisticated! Came out awesome!
Scrap wood City Thanks!
Beautiful result - also for the appearance, I think you did well to finish them.
Now all I need is a fully equipped workshop and years of experience in wood-working...
or a local carpenter
I wish my dad had such a variety of tools and workbenches. I would probably build most of my stuff on my own.
wow. actual good craftsmanship on youtube. good work. wish i had a full wood working workshop!
Very good craftsmanship. Rewards evident.
Klasse Projekt und tolles Video!!!
SWEAT! Simple, effective, and inexpensive, what more could you want.
Impressive. Both the project itself and your strength. Good job.
As always, great project AND video! Your content always brightens up my day!
Keep up the good work (and workouts)!
Oh Lord, what a cool channel!
one of the best videos i saw in the last months
A diy builder creative and a fitness freak great combination just like me ...!
i don't know but for me the creation process was much more satisfying than the finished product. [ The Pushup Bar looks Great :) ]
Top Tip for push ups!
Just do them without handles, less chance of injury and it's free!
Genius you can do more exercises with them;)
Nice work. Now I can replace my old ones that I managed to destroy. These look way more solid. Like you, I also make a lot of my own gym equipment and personally I find that the equipment made properly with wood is a lot stronger than some of the steel equipment on the market. Keep up the good work 😉
09912Phai And it's cheaper too.
Amazing job ! Congratulations !
Can you tell me about each measurement, please? And what kind of wood you use?
Nicely done Marius.
I think a hex shape handle would fit the hand nice as well. Good info,thanks!
I love the start of using the handsaw and switching to the bandsaw. I did the same thing when working on some poster frames. What the heck am I doing using a handsaw when I have a bandsaw?!?
This is DIY but Pro Level! Why would you buy anything if you can do it better. Great video!
Great project, loved the moves at the end, talented
Always love your videos, and your sense of humor. I'm going to make myself a set of these.
William Wishau Thanks!
I really liked the editing on this. Thanks for the video
Nice job. I don't have such tools. I will rather assembly PVC tubes.
Nice to see I'm not the only one spending "all" my time vacuuming! :D
come on!!!! is not easy for common people to have all this equipment, but thank you for your video :)
I really enjoyed this video, and that handstand trick was amazing!
kim4win Thanks!
Wow. Best parapetes ever. great work my friend..!! you are amazing...!!
I should have a workout while im building. *Proceeds to saw away* *stops*. No -_-😂😂😂😂😂😂😂
Great project. After time spent in gyms then doing at home body weight exercises. The home workout for me is a better workout. Well done
could you tell me the dimensions please :)
Best video I've seen all year 👍
Awesome workshop.
I like your work 🥰
So cool, and professional 😊
Bro you are mad impressive strong i mean handstand so perfect wow lsit was mind blowing
Love your explanation bro ❤
You are my hero. Awesome press
i use a death stop to make sure i don´t drill all the way trough XD
Oh man! You had me going there when you pulled out the hand saw!
One again, very well done!
Excellent- Funny, informative and innovative.
Hi mate, thank you so much for sharing. What's the distance you recommend, from the floor to the center of the bar (and of the holes) ?
Very nice! If I buy all the gear necessary to do that, I only end up having bars costin roughly 5000 € =) I will just try with a saw and some easy tools I have at home. very nice job man!!
beautiful home. did you build anything inside of it? or any future possibilities for your home?
ha... look at you planching. good job
Hi.Your work is so beautiful. Can you show the bar's measurements on the photo?
Congrate, Really nice job...Enjoy them....
you are a brilliant guy and very inspiring, thanks for the videos ^_^
Great work!
Awesome!
Cool video, once again.
THX!
Very nice, but how would you do it without machines ? That hole for handles ?
You need at least a hand held drill and a big drill bit.
Make some to sale. I would buy them.
That man is creative
What are the dimensions of the cedar wood planks? Ex: 2x4
the last one was the best :D :D :D
wonderful bro
very nice!
Why’d you dump out the vacuum... then vacuum it again?
i am going to make it thanks for tutorial
Well done. I built a set of parallettes similar to the ones in the photos you used in the video of the expensive ones, the one with one screw holding it together. That design was actually ripped off from a German builder at Rawal who builds those parallels with a bridal joint holding the bar on the legs. I like your design though also.
+NewportDispatch Thanks.
Great work, Marius!!!!
Sehr gut,tolle idea Marius.İch da noch eine Frage zu deiner Säulenbohrmaschine,die scheint sehr leise zu sein.Kannst du mir bitte sagen welche Marke das ist und wie groß die ist ? Danke
Kemi Kemii Die ist nur so leise, weil ich alle Maschinengeräusche beim schneiden leiser mach. Vor allem wenn ich einen Text drüber sprech. Die ist sonst so laut/leise wie jede andere auch. Ist die Bernardo BMT 20 und hat einen Ausleger von 16cm also eine der halbwegs größeren. (bin zufrieden damit, würde aber heute diese Marke nicht mehr empfehlen)
Marius Hornberger Achso ist das,und ich dachte das sie ganz leise ist :-) . Naja da kann man nichts machen.Danke für deine Antwort,werde weiterhin deine tollen Videos verfolgen.
@7:50 Holy hell. Nice work.
w0mbles Thanks!
You are awesome :D i really like your videos.
Trabajo perfecto!!, me envías un par a Argentina? hahahaha
this is great and is easy :)
Nice project and by the way, your strong dude hehe
Greetings
Erik
Good Job Marius!! :-D
I'm gonna build one in arabic version
I have made the similar thing to hold toilet paper.
And it broke.
very nice job done, man ;)
Regular fellow! Good job!
wow... need to make 2 of those to get rid of my belly :-)
8:10 They are not safe if they slipper, I made a pair very similar to those, but added some rubber pads at their bottom face, so they really cannot move while using it.
Uchale, ahora me faltas las maquinas. 😅😅😅
what is the diameter and length of the bar?
very well done
Tolles Video und recht witzig!
Sehr geil. Allerdings muss ich mir erstmal das ganze Werkzeug kaufen. Meine Frau wird begeistert sein. 😂😂😂🙏
Wegen des PU-Lackes hätte ich mal ne Frage. Ein Kumpel von mir, selber Schreiner, meinte, dass die PU-Lacke problematisch seien was Giftigkeit angeht. 1. Stimmt das? Und falls ja 2. Löst sich das Zeugs durch den Schweiss?
Ansonsten sehen die Dinger geil aus und Du könntest sie so wirklich vermarkten.
Nachdem der Lack großflächig für Innenräume gemacht ist, denke ich, dass das mit der Giftigkeit nicht stimmt, wenn er komplett ausgehärtet ist. Aber genaues weiß ich nicht. Lösen tut es sich nicht durch Schweiß, zumindest nicht bei so wenig Benutzung. Heute würde ich das Teil aber auch ölen, statt lackieren
Super, I would order one from you :)
I like you videos
strips of mouse pad on the bottoms?
well done!
Good job
What are the dimensions? Height, length & width.
Great video Marius :)
do you have the dimensions??
Welches Öl/ welchen Lack benutzt du genau?
Ps: Klasse Video ;)
+Sebi Land Herbol Kuststoffsiegel.
awesome.!
Good job a
Beast!
Nice bro
Sieht sehr stabil aus, gefällt mir gut! :)
how to online buy...plzz..i buy??
Do you know the dimensions of the handles?
Damn those are some sexy parallettes
are you a gymnast ? great job looking good :)
WorldstreetWorkout I was. From the age of 4-13
Damnnn a lot of sexy machines 😭 mad money there
The production on this video must have been hilarious. *shifts camera and light slighly* "Ok...butt lighting is now acceptable..."
Did you notice any increase in your female demographic after this video? :D
Das workout beim bauen^^....hihi