I guess Im randomly asking but does anybody know of a tool to log back into an Instagram account? I stupidly forgot the login password. I love any tricks you can give me.
@Dash Mason Thanks so much for your reply. I found the site thru google and Im trying it out now. Seems to take quite some time so I will reply here later with my results.
Thanks for the interest Venon. With a 6s battery as in the video at maximum power gives about 7 to 8 minutes. with two batteries 4s 5000mha 60c maximum, gives about 9 to 11 minutes. Any questions you have, ask. This set I'm applying on a rc, Viperjet fiiberglass, to run on 8s.
Yes, you're right. it was just the first experiment to test. I installed the turbine on a fiberglass Viperjet to use 2 batteries of 5000mha 4s with 60c. still, thanks for the opinion
ok heres my list Im getting ready to order from hobbyking, is this everything I will need? EDF, correct charger and battery? esc and on and off button. please and thanks for your time! --- Dr. Mad Thrust 90mm 11-Blade 1700kv Motor - 2300watt (6S) YEP 120A HV (4~14S) Brushless Speed Controller (OPTO) Turnigy Heavy Duty 5000mAh 6S 60C Lipo Pack w/XT-90 Turnigy Reaktor 300W 20A 6S Balance Charger now with NiZN and LiHV HobbyKing™ Servo Tester SKU: HKSESC_TST I think it looks good but im not sure... Thanks again!
Great buy, all ok, but need a sample SBec ( hobbyking.com/en_us/turnigy-5a-8-26v-sbec-for-lipo.html ), or ( hobbyking.com/en_us/turnigy-5a-8-40v-sbec-for-lipo.html ), because the ESC has no output to feed the receiver. The Esc YEP 120A HV, has a cable for programming, and another for connecting to the receiver's trimmer (3), the Sbec feeds the receiver through channel (7). Any questions, feel free.
Hello, if the plane has 2 edf + 2 esc's, you don't need a battery for each Esc. it maintains the same voltage and doubles the power in milliamperes, this way it supplies the 2 edf's with a double battery of the same voltage connected to a single input that distributes to the two inputs of the 2 esc's. I hope you understood, any doubts, tell me Thanks
Yes, as long as you do not use more than the recommended voltage for this EDF / ESC. Or if it is higher than the recommended voltage, use a voltage regulator for the desired voltage, so that it does not exceed. I hope I helped, thanks.
AM making a flying WING, using a mad thrust 11 baldes, 90 mm edf with a 150 a turnigy esc and a 5000 mah 6c turnigy battery and It seems nota tô delivery the thrus i need tô make this 4 kg WING in tô te Air. Does anyone can help me with some infos on what could bê wrong with my set???
Hi, i'm very new to this hobby. Can you tell where i can get the parts from? I've been looking on this website called "hobbyking" and it seems the EDF is discontinued. Would just like to hear where you got it and if there are other sites like "hobbyking"
Hi. I'm sorry but this model has already been discontinued. There are other identical ones but the blades are nylon. There are other brands with aluminum blades, you can try at amazon.com. Any questions available, thanks. The one I present in the video, in the middle of the night, on high rotation, drops small microlight.
you can use as an example an equal Esc, which is shown in the video: 120 Amp YEP. or another brand, but it should be at least 120Amp. Any doubts say something...
When will RUclipsrs learn to stop using cheesy music in these display videos it's already proven that between 80 and 90% of viewers don't like it not just saying that for this video but for most videos who use it in General. Also what is the thrust measurement of this jet engine I want numbers not just the word thrust in the title.
okkkkaaaayyyy ... thats one way of scientifically calculating thrust !!!! CHEERS
Neville Rodrigues thank you
Sounds awesome man, and great video
Thank you so much…
Thanks for the video…was looking at this on Hobby Kings website, and wanted to get an idea of the actual size of this. 👍
Thank you for your comment, any questions please say something.
I guess Im randomly asking but does anybody know of a tool to log back into an Instagram account?
I stupidly forgot the login password. I love any tricks you can give me.
@Dawson Kevin instablaster :)
@Dash Mason Thanks so much for your reply. I found the site thru google and Im trying it out now.
Seems to take quite some time so I will reply here later with my results.
@Dash Mason it worked and I finally got access to my account again. Im so happy:D
Thank you so much, you saved my account !
Thankyou
Nice i subbed.
How long can you put that at Full Throttle with a battery lke that 10 minutes 20 minutes? Thank you for any info I'm working on a project
Thanks for the interest Venon. With a 6s battery as in the video at maximum power gives about 7 to 8 minutes. with two batteries 4s 5000mha 60c maximum, gives about 9 to 11 minutes. Any questions you have, ask. This set I'm applying on a rc, Viperjet fiiberglass, to run on 8s.
@@powertv4607 thanks for the info! awsome, yes I will have more questions soon, thank man!
i actually love u bro thank u for making this... u know how many pounds of thrust this produces?
Purple Guy Thank you . With 8s lipo is very very unbelievable the trust it make. Some day I try to make a movie with my viperjet of fiberglass.
I drew the number 400 [Tanmoy roy]
25c is too low for this. Thus the puffed lipo pack.
Yes, you're right. it was just the first experiment to test. I installed the turbine on a fiberglass Viperjet to use 2 batteries of 5000mha 4s with 60c. still, thanks for the opinion
It Runs (like most of them do) details and analytics would be helpful
ok heres my list Im getting ready to order from hobbyking, is this everything I will need? EDF, correct charger and battery? esc and on and off button. please and thanks for your time! ---
Dr. Mad Thrust 90mm 11-Blade 1700kv Motor - 2300watt (6S)
YEP 120A HV (4~14S) Brushless Speed Controller (OPTO)
Turnigy Heavy Duty 5000mAh 6S 60C Lipo Pack w/XT-90
Turnigy Reaktor 300W 20A 6S Balance Charger now with NiZN and LiHV
HobbyKing™ Servo Tester
SKU: HKSESC_TST
I think it looks good but im not sure... Thanks again!
Great buy, all ok, but need a sample SBec ( hobbyking.com/en_us/turnigy-5a-8-26v-sbec-for-lipo.html ), or ( hobbyking.com/en_us/turnigy-5a-8-40v-sbec-for-lipo.html ), because the ESC has no output to feed the receiver. The Esc YEP 120A HV, has a cable for programming, and another for connecting to the receiver's trimmer (3), the Sbec feeds the receiver through channel (7). Any questions, feel free.
That engine is powerful, with a 400mm fan that would be a CAN'T TOUCH thing.
Could you get something like that???
I need it for my 1/2 Horten Ho-229
Hi, I don't have what you are referring to, sorry but I can't help.
making of atleast 40 seat mobelity pod to conect the city & air ports of the uae
Hi I'm new to this hobby and wondering what kind of batteries I should be looking for, should I care more about the C rating or Mah?
YES
Depends on the model, the esc and motor you're running. So many variables. What models are you running?
Does it matter what battery I use
One of rc boeing airplane has two edf to set two esc it two esc each too correlative doing lipo battery ?
Hello, if the plane has 2 edf + 2 esc's, you don't need a battery for each Esc. it maintains the same voltage and doubles the power in milliamperes, this way it supplies the 2 edf's with a double battery of the same voltage connected to a single input that distributes to the two inputs of the 2 esc's.
I hope you understood, any doubts, tell me
Thanks
Do you have any sources or articles you used to build this EDF?
I'm sorry but I didn't understand, can you explain yourself better, “source”what do you mean?
can you tell me the name of the components
You have sll in the video
ayo watch yo jet
For sale for Brazil??? How many???
Thanks for asking, but I don't have one for sale, thanks.
Dr. Mad Thrust 90mm 12-Blade Alloy EDF 1600KV Motor - 2100W for £80 online
Is there a way to wire this to have a 12v battery as the power source
Yes, as long as you do not use more than the recommended voltage for this EDF / ESC.
Or if it is higher than the recommended voltage, use a voltage regulator for the desired voltage, so that it does not exceed. I hope I helped, thanks.
@@powertv4607 Thanks for the reply, yes you have helped alot I'm sure I can complete my project now 😀
Cuántos kilos levanta ? Quiero muchos de esos??
4,6kg
Puede levantar mas peso sierto ?
Para levantar 2 toneladas
AM making a flying WING, using a mad thrust 11 baldes, 90 mm edf with a 150 a turnigy esc and a 5000 mah 6c turnigy battery and It seems nota tô delivery the thrus i need tô make this 4 kg WING in tô te Air. Does anyone can help me with some infos on what could bê wrong with my set???
I'm sorry I didn't answer earlier, do you still need help?
Hi, i'm very new to this hobby. Can you tell where i can get the parts from?
I've been looking on this website called "hobbyking" and it seems the EDF is discontinued. Would just like to hear where you got it and if there are other sites like "hobbyking"
Hi. I'm sorry but this model has already been discontinued. There are other identical ones but the blades are nylon. There are other brands with aluminum blades, you can try at amazon.com. Any questions available, thanks. The one I present in the video, in the middle of the night, on high rotation, drops small microlight.
For sale ? Post for Brazil ? How many 2 unit. ..?
Sorry but not for sale.
How much thrust you making on this setup dawg?
Maybe 2-3kg
@@powertv4607 thanks for the info dawg
Did you ever use it on a plane?
Yes in a plane viper 6s 5000mha
@@powertv4607 Would love to see that fly, Do you have a video of it that you're going to upload soon?
@@Neilukuk Sorry but I don't have any video, I'm not going to fly with the viper anymore, because I have it for sale.
@@powertv4607 No problem. Thanks anyway and good luck on selling it.
👏👏👏😀🏆🏆🏆🏆🏆🏆
hi i am new to this and want to know what esc i should use for this edf
you can use as an example an equal Esc, which is shown in the video: 120 Amp YEP. or another brand, but it should be at least 120Amp. Any doubts say something...
PowerTv Thanks so much, I am planning to put two of these on a mountain bike and when I have to do a very hard mountain just turn them on
It's a good idea :-) but it only gives you 5 minutes of use. For this you need an Esc for each turbine.
PowerTv why only 5 minutes?
@@powertv4607 hi, i was wondering what esc should i use for a 4528W edf
👍
Lipo pack puffed. Too low C rating.
Hi, can lift up a guy... A motor like this?
Not strong enough for that. Working with 8S, has only force of 4.6kg.
Hi
Can you lift up a guy with a motor like this? Learn English!
@@captninsno2320 ???? nooo
@@captninsno2320 grammar nazi
So this can lift only like 10lbs
When will RUclipsrs learn to stop using cheesy music in these display videos it's already proven that between 80 and 90% of viewers don't like it not just saying that for this video but for most videos who use it in General. Also what is the thrust measurement of this jet engine I want numbers not just the word thrust in the title.
Thank you for your comment, I will take this into account.
stfu
Put some rap for us 🤣
While I generally agree with you this time I like it because it's not some generic rock music or whatever 20 year old tech nerds listen to.
Ну и что?🙂
maker Land craft uae &so
Do you have any sources or articles you used to build this EDF?
I bought the edf as is on Ebay, I didn't change anything, thank’s