National Audubon Society Singing Bird Clock Repair
HTML-код
- Опубликовано: 19 окт 2024
- This is a clock I got at an estate sale. It was super cheap, and I know a lady that loves these clocks. It had some problems and I sorted them out. The clock works great now, and it is on a wall in her work office. Everyone in her office loves this clock. They do make new mechanisms that fit these clocks perfectly, so don't be afraid to buy one of these if it does not work. Very easy to work on, and enjoyable after it is done.
![VICTOR Denmark Open 2024 | An Se Young (KOR) [1] vs. Gregoria Mariska Tunjung (INA) [5] | SF](http://i.ytimg.com/vi/Y3QEyCih85s/mqdefault.jpg)
It’s vintage 1990s. My cats love it. They know how to tell time.
Found one in a thrift store yesterday. My grandmother used to have one in her kitchen. I was planning on giving it to my sister, who is a bird freak, but the movement is busted. Very happy you've shared this, thank you, I'm going to give it a whirl
I hope you were able to get it working and she is enjoying the birds singing! Thank you for watching and leaving a comment!
Had the same story here! I got one from my great grandparents, the movement wasn't working. Turns out, it had a small amount of corrosion on the contacts for the timing chip (the quartz crystal thing.) I cleaned it with alcohol and the movement started up again, and it's been running good since! I wish you the best of luck with urs :D
Can you get a new motor for Audubon Bird Clock
Thanks for this video. I have this clock and it stopped making bird sounds. My husband is quite handy as an engineer so I'll see if he can follow your video and fix mine too.
I hope your husband got your bird clock singing again! These clocks are great to hear when they sing! Thank you for watching and leaving a comment!
Was thrilled to find this video,thank you!! My wires are a little different tho and I’m not certain what to do. Not sure if I can post a picture here or not but really be grateful for your insight if you’re still monitoring this post. Again, thank you 😊
What is broken? Is the battery compartment or the capacitor or the wiring? I got mine in goodwill but it does not sing, looks very similar like in your video except the one that you soldered. Everything in mine is connected to the capacitor.
I had a cheap noname knock-off clock similar to this since 1998, and one day back in 2015 or 2016 the clock mechanism just stopped working. The clock doesn't have any brand on its face, just "Handar" on the mechanism itself. The sound module is made one single piece with its battery compartment, and the test button is just glued into the main frame plastic near the speaker, connected by two short pieces of wire. The clock face protective cover is plastic, not glass, and it is installed in such a way that I doubt it can be taken out without scratching or cracking.
The sound quality is worse than in these ones, and there is no light sensor at all (the silent hours during the night are just pre-programmed to make a quiet tick instead of birds' singing). Still, I liked it so much because I got it as a memorable present from my parents when I was a kid. The sounds work good as new till today, but I have no idea on what is the problem with the clock part. Maybe quartz contacts corrosion as in the case of another person in the comments? I am afraid to disassemble it though, as it could turn out that I will not be able to put the parts back together.
Yep shes gonna love it
Got mine handed down from my grandmother who had it in her kitchen for as long as I can remember. I'm here to try to revive it as it has now stopped working.
I guess what I'm looking for is how to replace or fix the clock mechanism.
Best clock ever. Thank you.
Wow, thanks!
Thanks for your video. How do you remove the clock hands?
They just pull off, not very hard either. Hope you get you clock singing again! Thank you for watching!!
and here I am taking mine apart. found it at the goodwill. brought it home and the clock worked for a second then stopped working. the bird songs are working really well but the clock itself does not moves with a fresh battery.
Have a question for you if you think you have an idea on how I can fix this.
So I replaced the old clock mechanism with a silence one since clicking is hard to listen at night.
The clock is moving and the birds chime when I push the test, but I can’t get it to chime on the hour.
I took out the wire part that was in the old mechanism but idk if I put it in the right place to get it to chime on the hour.
Do you think it needs to touch a metal part of the mechanism?
The sound on my clock is low. Is there a way to turn up the volume?
I have the same problem 😢
Mine sings when I press the button but doesn't on the hour... there is some part that makes contact when the big needle hits 12 o clock??
They changed the birds on my newer version, no more woodpecker and a morning dove added at 7 am....
How do you get a new motor for a clock
I'm looking for the same thing as well
Mine has a problem with the bird sounds, static sounding. Ant tips to fix. Got it for $4 at goodwill.
Oops after watching I see, I'll have to check the wiring inside.
I hope you figured out what is wrong with your bird clock. Thank you for watching and leaving a comment!
I just found one and the speaker in it was kinda of messed up. Thank you for this video
I have this clock from my parent's home. It's been hanging at the office now and everyone loves it. The birds work, but the clock mechanism is off. I've had it apart, & changed the batteries. It works for awhile but then loses time on & off. Any suggestions? BTW, love your video! You are so patient with these lovable gadgets.
i have the same problem with mine
I know these clock mechanisms are not all that great. You can get replacement mechanisms on Amazon. I think there is a capacitor in the mechanism that fails and when it starts to fail they can't keep time very well. Just what I think though. Thank you for watching and the kind words!
where can I buy a new clock mechanism?
Likely someone tried to get it to work. Looking a mine. Seems like it would start working. But, the electronics fails to chirp on hour. Maybe the photo resister. Maybe the clock is not tripping the sound board. Easy to open up. Would like to trouble shoot why it is failing. Several times seems to work but fail on wall.
I want my light sensor disabled so it is loud all the time, even at night. I wonder if I short the photocell out it will make it loud all the time?
yes
I got one of these from my Grandmother and recently found it, and can hardly hear the birds, is there a way to increase the volume?
My clock stopped chirping after 2 years. It no longer makes a click on the hour, so there is something wrong with the switch. I haven't tried taking it apart, not sure if I can fix the switch. The red button on the back works.
The trigger mechanism is broken. A new clock motor with a trigger mechanism costa less than $8
Can you get a bird sound motor
I wonder what would happen if you sent this video to the Audubon Society
Sorry for the very late reply to your comment. I would like to know what they would say about my video of their clock. Thank very much for watching!
I have one on my bench too. It works, it just isn't very loud, I think the speaker amp is needing some components changed. If it works, it has to work loudly. The Lady that owns it is in her 80s and is hard of hearing.
just bought this exact clock on fb market place! its not working, ( i was told it was working.) birds sing but no clock movement. i really want to get it working. micheals joannes and most craft places sell clock mechanisms. amazon has one for just over $16.00.
im not bad at fiddleing with thisg like this. but worried about the attachments for sound and light sensors
things not thisg
Make sure you get a clock mechanism that has the built in switch. The light sensor is connected to the PC board. You will just have to desolder the clock mech. wires from the PC board, and then when installing the new clock mech, solder the wires to the board. The hands from the old clock mech. will, or I should say, should fit on the new clock mech. Not hard at all, just watch that new wires don't smashed when putting the clock back together.
How do you turn the volume up
It would be more helpful if you show the different types of wire
Do you happen to know what model number this is?
I just got one recently & it just arrived, but as I’m testing the Bird Sounds on mine, it’s not that Rare Bird Sound Pattern that I was expecting, which makes me so confused, as I don’t get it! 😕
That Rare Singing Bird Clock is by as the Patent Made In China is a Sticker instead of it being imprinted into the Back Plate! 🤔
So, if mine is not doing that Rare Bird Sound Pattern at all, then I really don’t get it, as that makes me mad 😡 & so confused! 😕
However, I just got another one with the Green Rim & I’m hoping that that one with the Green Rim’ll have the Rare Bird Sound Pattern 🙏🏻 & if the Green Rim one doesn’t do it either, then yep, I’m so confused 😕, as again, that rare one is by as the Patent Made In China is a Sticker instead of it being imprinted into the Back Plate! 🤔
We also have these clocks in the UK. I believe that the RSPB sold them.
Thank you for watching and leaving a comment!
no volume sounds to low😢
They started producing them in 1997
Oh I did not know that. I thought this clock was older than that, LOL! Thank you for watching and leaving a comment!
@@wouldchuck3619 Your welcome have one on the wall in my very own room
It's going in the trash. It's not worth the time to fix for $25 bucks.
I wish I had a PO Box. I would have you send it to me, but I don't have a PO Box. Thank you for watching!
these clocks are not cheap to buy, if i could fix for $25 i would fix it! i may take mine back to fb guy, get money back and perhaps put it towards new one. im just not sure about changing the clock (the light sensor and singing attachments not sure where they get hooked to/from) if you had change clock here id have some one to follow...ahhhh