SSUPD Meshlicious Build - Step by Step Guide

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2024

Комментарии • 62

  • @CommunistBanana
    @CommunistBanana 2 года назад +21

    This channel is criminally underrated.

    • @ChristopherFlannigan
      @ChristopherFlannigan  2 года назад +1

      Thanks

    • @quigonkenny
      @quigonkenny 5 месяцев назад

      I like how much detail he goes into with his builds. For experienced viewers, it gives a better look at cases than whatever sponsored videos you might find elsewhere, and for newbies, the level of detail he goes into is just what someone who's learning is going to want to see.

  • @arddel
    @arddel Год назад +6

    You are by far the best channel out there. I'm now building into this case, and your video is my reference. THANK YOU!

  • @DILLSOLO
    @DILLSOLO Год назад +7

    This is the BEST and most informative video on this case. You explained every specification possible. You rock man!

  • @patsipes6561
    @patsipes6561 2 года назад +11

    You have the most detailed build explanations on YT. Your video is a must watch if it covers a part/case that someone is using. Well done.

    • @ChristopherFlannigan
      @ChristopherFlannigan  2 года назад +1

      Wow, thanks!

    • @betitoroks
      @betitoroks 2 года назад

      @@ChristopherFlannigan do all the parts in the description come with the smaller stuff, like the rubber pad and stuff?

  • @Jacketz123
    @Jacketz123 2 года назад +7

    Super informative video mate.
    I was having trouble imagining how the different configurations would work in my head, but you going over each one in detail helped me a lot.
    Much appreciated 🙏🏻

  • @Yasorry93
    @Yasorry93 5 месяцев назад

    This man should be at the top of pcbuilders community

  • @calidawen405
    @calidawen405 2 года назад +3

    So few itx case build guide in RUclips! Many thanks to Christopher! BTW SSUPD Meshlicious is an wonderful case anyway.

  • @sangu1ch
    @sangu1ch 2 года назад +1

    Used this guide today to build my meshy. Helped 1000%. I got stuck on the pump aio power on my b660i auros pro mb. I had to remove the plastic shell from that four pin adapter and then the three pin plug fit. Also used the coolermaster ml240’s psu adapter instead of the mb to power my rgb on the fans and pump.

  • @thomasschrader8436
    @thomasschrader8436 2 года назад +2

    Never seen before a small case with so many possibilities to adjust, excellent review - thanks.

  • @rushsoccer1355
    @rushsoccer1355 2 года назад +1

    Underrated channel, so much detail about the case and the build process.

  • @jes6007
    @jes6007 2 года назад +3

    Your videos are so well done! I basically copied your Meshify 2 Compact build with a Strix 3080 and had an excellent build experience and great performance and results. Lately your videos are making me lust after a SFF case. Thanks for the great content!

  • @phelpsomatic
    @phelpsomatic 2 года назад +1

    It takes so much work to put together something like this. Thank you!

  • @jesusjr5364
    @jesusjr5364 2 года назад +1

    This is the best pc channel imo your videos are really high quality and you explain everything very well

  • @jeverbever
    @jeverbever 2 года назад +1

    I used one of your older tutorials to guide my PC-build last year and it has worked flawlessly, thank you!

  • @iceonefto
    @iceonefto 2 года назад +1

    I used your tutorial for the lan cool 2 mesh to setup the fans, you are very specific and it helps!

  • @Stuart_Davies
    @Stuart_Davies 2 года назад +1

    Great video Chris, we used this as a guide for our build yesterday and it really helped the process proceed smoothly.

  • @drab6853
    @drab6853 2 года назад

    This dude must have minimum 5M sub !! Insane work 👍

  • @Kairi_97
    @Kairi_97 2 года назад +1

    Thanks for sharing!
    Definetely one of my all time favorite cases

  • @janreypunzalan9067
    @janreypunzalan9067 2 года назад

    Nice one! VEry informative. I like how you showcase everything from the case and components.

  • @DVD2005YT
    @DVD2005YT 2 года назад +4

    I love mini itx solutions, but honestly for a such high end components i believe more space is preferable.

    • @ChristopherFlannigan
      @ChristopherFlannigan  2 года назад

      It depends on the situation, but good to see this works so well if you need it

  • @davey_tones
    @davey_tones Год назад

    great video! ill be building in the meshroom S next weekend. should be about the same.

  • @dreamfunction4491
    @dreamfunction4491 Год назад

    Awesome quality as usual.

  • @Fryderyk-w5h
    @Fryderyk-w5h 15 дней назад

    Thank you! Great help :D

  • @Dudesnspace
    @Dudesnspace 2 года назад

    Do you have any recommended changes to this regarding fans / powersupply fans for those of who have the acrylic panel instead of the mesh panel? Thanks!

  • @Base_
    @Base_ 2 года назад

    Excellent video. very detailed and well made. Thank you

  • @mrb3991
    @mrb3991 2 года назад +1

    Hi Christopher, Great video. Do you think my MSI Gaming Z trio 3080 .which is 322mm long , would it fit in this case ?

  • @lilgohan
    @lilgohan 2 года назад

    great build guide! Is the included hdmi cable 2.1? I need it for gsync at 4k/120

  • @ellonysman
    @ellonysman 2 года назад +1

    Some day....can we pay you to use messenger for question/answers?

  • @theelephantseye
    @theelephantseye 2 года назад

    Great build I'm sold :)

  • @phelpsomatic
    @phelpsomatic 2 года назад +1

    Christopher, I'm also installing the Asus ROG Strix Z690-I board and running into an issue installing the M.2 drive (Samsung 980 Pro). Once installed and the heatsink parts are replaced, the SSD bends in the middle. The only way to get it to stay straight across is to loosen the screws on the heatsink considerably (to the point where it's loose and barely secured). I've seen complaints about this issue on Newegg. Any ideas?

  • @TheGlobuleReturns
    @TheGlobuleReturns 2 года назад

    Are these custom builds you’re doing for people on the channel mate?

  • @markkennedy4055
    @markkennedy4055 2 года назад +1

    Very through, you didn't miss a thing! Thank You. : - )

  • @Garethfrostturkeythroat113
    @Garethfrostturkeythroat113 2 года назад

    Hello Christopher is there any way to contact you about building a pc I live in Ballyclare Northern Ireland
    Cheers

  • @beldenhaha3077
    @beldenhaha3077 2 года назад +1

    is the rubber spacer for the psu necessary?

  • @betitoroks
    @betitoroks 8 месяцев назад

    Anyone else having an issue where the pc crashes and has an "unresolvable error" code?

  • @marvskitchen
    @marvskitchen Год назад

    Has anyone tried fitting a 4080 gaming x trio in this case ?

  • @bakerj3527
    @bakerj3527 2 года назад

    im planning to do this same build with the same mobo but would a nzxt z53 fit properly without having to remove the ssd slot heatsink?

  • @gamesucks
    @gamesucks 2 года назад

    Where did you get the add-in card for Front IO?

  • @F4ust-crw
    @F4ust-crw 2 года назад

    if I put an igame rtx 3070 will it fit the case or not

  • @dicegamenetwork
    @dicegamenetwork 8 месяцев назад

    I didn’t realize Leprechauns used computers

  • @ni5ga
    @ni5ga 2 года назад

    Its not 332 graphic card space its 336

  • @mdnormatnor5226
    @mdnormatnor5226 2 года назад

    Not so good air Flow

  • @ragingboba1780
    @ragingboba1780 2 года назад +1

    Am I early?

    • @ChristopherFlannigan
      @ChristopherFlannigan  2 года назад

      First here

    • @ragingboba1780
      @ragingboba1780 2 года назад

      @@ChristopherFlannigan I really love your videos it hooks me to make my build to be itx soon once I get the budget to move to it

  • @adspie
    @adspie Год назад +1

    the position of the AIO is incorrect.

    • @kracksickIes
      @kracksickIes Год назад

      What are you talking about?
      ruclips.net/video/BbGomv195sk/видео.html

  • @extremelydave
    @extremelydave 2 года назад

    And here I thought the cheesy multiple entry dance had finally disappeared.......... pretty tacky way to try to build viewers.