BMW F32 435i surround view camera retrofit 5DL (wiring) - part 1

Поделиться
HTML-код
  • Опубликовано: 18 дек 2024

Комментарии •

  • @fraizer2600
    @fraizer2600 3 года назад +1

    Great work ;) crazy all those cables......

    • @DorksandBolts
      @DorksandBolts  3 года назад +1

      thank you! it wasn't easy, but I am sure I am going to enjoy the final result :)

    • @fraizer2600
      @fraizer2600 3 года назад

      @@DorksandBolts hope it will be :)

  • @JPDenali
    @JPDenali 6 месяцев назад

    I just did the wiring yesterday and getting the wires through the large black grommets behind the brake booster and fuse box on the driver and passenger side was bad 😂. Admittedly, the first wire I ran on the driver's side I was figuring out how to do it, but I had a very long (15 inch flathead screwdriver) that I used to push the cable through the hole in the grommet and then fish it from inside. On the passenger side, the job took 5 mins since I learned from the drivers side

  • @JPDenali
    @JPDenali 6 месяцев назад

    At 9:05, is the harness you are showing in the video the same one that is in the door jamb? Is this removed by removing the rubber boot with all of the door wires that is in the door jamb?

  • @Andy-bm6zo
    @Andy-bm6zo 4 месяца назад

    Sick music 👏🏼

  • @BlueLineGarage
    @BlueLineGarage 3 года назад +1

    I love that red trim so much!

  • @bzianpods
    @bzianpods Год назад +1

    Hey, I was planning on installing this onto my 2015 428I Gc. My car came with the bmw reverse camera, so how would I go about installing this? And what parts would I need to buy to install it.

    • @DorksandBolts
      @DorksandBolts  Год назад +1

      That’s great, if you watch this video plus the other ones following this install, I think I created a full playlist. You will be good to go.

    • @bzianpods
      @bzianpods Год назад

      @@DorksandBolts Okay cool, thanks for the fast reply also 👍🏿

  • @BI123-0
    @BI123-0 2 года назад +1

    Awesome video! I came across your video while doing some research. I found a genuine Top View 5 Camera Set Mirrors LHD Module Wire complete set and I was thinking about either installing it or having it installed. Does this require additional programming?

    • @DorksandBolts
      @DorksandBolts  2 года назад

      That is geat news that you want to pull the trigger on this. And yes you need to code the option in the modules.

  • @_Forever555
    @_Forever555 3 года назад +1

    Thank you so much, I wanted to know how to do this!

    • @DorksandBolts
      @DorksandBolts  3 года назад

      Glad to help! It is not easy. But stay tuned for the last stage of this circus

  • @JCod306
    @JCod306 2 года назад

    Can you please 🙏🏽🙏🏽🙏🏽 start listing the part numbers used in the description? That info is so extremely valuable and necessary for us to duplicate your successes! Thank you for all of your hard work and for sharing it with us! 💯🤜🏽

    • @DorksandBolts
      @DorksandBolts  2 года назад +1

      I used to put all the numbers, but then for this kind of retrofits the part numbers are very specific to your car options and must be verified for fitment. I could definitely give you a hand to find the parts for your specific car if you need them.

    • @JCod306
      @JCod306 2 года назад

      @@DorksandBolts oh I see… ok! Would you be able to help me with the numbers for my f32 428i xdrive?

    • @DorksandBolts
      @DorksandBolts  2 года назад +1

      @@JCod306 sure, reach out with your social media of choice

    • @JCod306
      @JCod306 2 года назад

      @@DorksandBolts awesome, thank you. What’s your Twitter handle?

    • @DorksandBolts
      @DorksandBolts  2 года назад

      That one we don’t have, but our contacts are on the channel info page

  • @washableaxe
    @washableaxe Год назад

    Can you post the part number for the long HSD cable that runs to the rear camera?

    • @DorksandBolts
      @DorksandBolts  Год назад +1

      There is not a part number for that cable only, you have to get the whole wire package.

  • @achieving_life
    @achieving_life 3 года назад +1

    Great work. Any updates?

    • @DorksandBolts
      @DorksandBolts  3 года назад

      Hi! Yes… there is a huge update, but a lot of our recordings got damaged and I am trying to make something salvageable. I will try to make a video this week that will explain a lot! So stay tuned. Cheers!

  • @brandoncarey9642
    @brandoncarey9642 3 года назад

    Can these parts work for the f30 as well?

    • @DorksandBolts
      @DorksandBolts  3 года назад +1

      Hi Brandon, the repair wires + the center console buttons do work for the f30, the camera module, there are several variations and it depends on the chassis.

    • @brandoncarey9642
      @brandoncarey9642 3 года назад

      @@DorksandBolts ok thank you

    • @brandoncarey9642
      @brandoncarey9642 3 года назад

      Also can you post the part numbers for the retro. And can this be installed without the kafas camera and HUD? Sorry if I’m asking for too much. I want to get this done on my 2018 f30.

    • @DorksandBolts
      @DorksandBolts  3 года назад +1

      Questions are good!! How about sending is a message over Facebook or our Instagram account. We could help you better like that

    • @brandoncarey9642
      @brandoncarey9642 3 года назад

      @@DorksandBolts ok will do