Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
You can also boil water, put it in the freezer and save it for later so you don’t have to boil it again 🤦♂️. Can’t believe channels like this ever get any traction.
@@yeoj_ because it will hold for like a day, either do it the proper way and use a plug or depending on wall you could use small pieces of wood like toothpicks or copper wire to effectively shrink the hole, why this works better then the glue gun is that this stuff is more solid, I could bite through a glue stick to give you a reference how soft it is
A true DIY life hack! Solving a problem that doesn't exist by doing something that takes way more effort and is worse than the correct way. Wall plugs exist for a reason
It’s so crazy that nobody has invented wall anchors yet. They’d be so useful. They’d probably sell them in every hardware store. Just a shame they don’t exist and we have to do this every time
This thing would only work on a dry wall or a wood wall. And i would not put anything important on top of that . The wall plugs open up when the screw Gets in that's why it's solid
You aren't unscrewing a bolt incased in hot glue like it were a mold. Also using the bold while the glue hasn't dried yet would be more effective and simpler.
Pro tip: This doesn't work. Explanation: That plastic case you put inside the hole isn't just to avoid the screw to SCREW the wall (pun intended, but actually it has a mechanism wich expands once the screw goes in, locking the whole thing in place making it very hard to pull it out if it isnt unscrewed.
You could just get a tool to thread wood. Like maybe nail a piece of wood to the wall and thread a hole you drill into it. This just looks awful, after a few days its gonna break especially with a hanger supporting a backpack. Or you could just get screws.
Top tip: that ain't gunna hold forever
Yeah it basically only had the weight pushing the backside up and the little to no grip it offers
@Magányos Lány you're definitely no Cappuccino Uno my guy
So like every screw ever
Yeah just use a fucking plug
Tip Top 🎀
Whatever you were smoking when you came up with this idea, i want some too
Me too 😂
Welcome to crackhead crafts and tips
Bring some chocolate as well.....
........and some skittles
You can also boil water, put it in the freezer and save it for later so you don’t have to boil it again 🤦♂️. Can’t believe channels like this ever get any traction.
Inhaled too much hot glue vapours
You are basically glueing a screw into the wall…
I usually use duct tape but this seems good too...
@@benedekfodor269 sometimes i also use chewing gum, sticks very good too
But worse cause it’s not even bonded
@@Juri187xx woww... good to know. I alwayz use menstrual pad🙄🙄
@@damianlorvett9942 ayoo, you need jesus😂
My landlord must watch these shorts
Lol god help you
Pro tip: tenants union
You're already paying for that fuckers mortgage
Most accurate comment I have ever seen on any platform.
Dang😂😂😂
Do you live in Portland lol
I love this channel, every time I think it can’t get worse, I find a new video from them
When the hot glue is the first thing you see you just know it’s going to be some bullshit.
Or a glue gun
I don’t see how this is that bad, just use black hot glue and what’s the issue. It may not hold forever but then just add more glue?
@@yeoj_ why not use a proper screw and plug? This is as I said just bs.
@@nameofthegame9664 Jajajaja so true. Hot Clue is shit.
@@yeoj_ because it will hold for like a day, either do it the proper way and use a plug or depending on wall you could use small pieces of wood like toothpicks or copper wire to effectively shrink the hole, why this works better then the glue gun is that this stuff is more solid, I could bite through a glue stick to give you a reference how soft it is
pov : eating hot glue moments before this was filmed
A true DIY life hack!
Solving a problem that doesn't exist by doing something that takes way more effort and is worse than the correct way.
Wall plugs exist for a reason
5 min craps gon be proud to this guy
@@adude6498 5 minute craps?
@@JasonW. yes thanks for correcting it
1
@@adude6498 I will not call 5 minute
crafts anything else but 5 minute craps now
“If there’s a hole, there’s a- oh wait wrong video”
- Master Oogway
Imagine bearing weight on a hot glue anchor
Oh no.....its 5-minute-crafts.....but worse....RUN!
💀
Fact: the bag is empty... and even that is way too heavy
And what was the point of making the mold?
Nothing .
@@user-jc1km1qv1m Like everything in this channel lmao
Proof-of-concept
You can use those little plastic things right?
@@binglol_2345 dirty
Дюбели в дифиците?
What was that for ?? My brain hurts... I enjoyed though the background music🤣🤣🤣
ALL I FEEL IS PAIN
Это вот он там минут 20 потратил на свои эксперименты с экскрементами, а мог ведь просто дюбель купить 🤷♂️
250 полуляхов из 250!?
Чел гений хахвхвхвх
300
250 мало
это 500 как минимум
Доктору Дью не показывать!!! Иначе пожар от его пердака спалит новый гараж Матвеева!!!
Он ему ещё Гагарина не простил.
"ЗДРАСЬТЕ)"
Согласен. Нужно доку скинуть, пусть размажет. Хотя уже неоднократно разрушал спермаклей в пух и прах
It’s so crazy that nobody has invented wall anchors yet. They’d be so useful. They’d probably sell them in every hardware store. Just a shame they don’t exist and we have to do this every time
Really good idea
Очередная шняга, которая работает только в режиме "презентации".
Fischer plug left the chat
If only they made a product like this you could buy readily at the stores
I think my landlord built my house using your channel as guidance
Top tip: You can glue the original holder bolt itself but it wont hold for long anyway.
Unless you want to do this every morning... don't do that xD
Sometimes i use bamboo skewers in place of tox. Works great on concrete. Easy, very affordable, works well, and lasts
Pro Tip: Anchors do the same thing. Crazy.
Pro tip: it take longer to dry than going to a local hardware shop to get a tox
Крайне качественное и крепкое соединение. Советую тебе на своей машине так крепить колеса.
Дюбели:
Ну да, ну да, пошли мы нахер
Doctor:" alright sir, what's the issue."
Me: "well you see...
Mollys really be in the corner of depression
Me:My ass is broken
5minute craft:GLUEGUN
Omg. Someone get this guy a medal.
You are like the five minute crafts of handymen.
is everyone gonna ignore the wall, its unfinished yet it's so classy
Can we start a GoFundMe so this man can get a $0.99 fastener at Home Depot?
Ah yes, inject cheese into the wall. I never would have thought if that.
Pro tip use the same colour as the wall. And don’t put anything heavier on it than your willing to have land on your toe.
Imagine living in a home where everything inside is DYI life hacks... its just a matter of time before stuff starts crumbling to the ground.
You don't tap a wall, you use anchors 😂
Protip: use vegetable oil for extra holding power
I love people who use anime rules irl such a fun part of our society
Главный вопрос: "Долго ли это будет держаться?"
Him after cutting the glue nail in half
Me : ayy that looking kinda sussy
"It's just a prank bro"
The prank:
For every 0 good comment I see, I see about an infinite amount of bad ones criticizing the video
??? I am confuse
Honestly, a decent amount of weight would probably rip that glue right out.
that's super cool. now i know how to hang my kitchen shelf.
The specific plastic things this mimics are cheaper, stronger and practical than resin
Me: "Damn....that's so cool".
Mr. Rawlplug: "So...it's cooler over here". 🤣
How did you get to hold the shape?
Wouldn't all of the stuff just roll right off?
Also, what did you use in the first place?
Everytime a video is starting with a glue gun you know its going to be garbage
Nice. A but plug!
So cool , can totally use that!!
You know something stupid is about to happen, When the hot glue gun comes out.
Tapping bits ?
Oh you mean drill bits and anchors and screws ?
POV someone says and that is why my wall is yellow
This thing would only work on a dry wall or a wood wall. And i would not put anything important on top of that .
The wall plugs open up when the screw Gets in that's why it's solid
Ah yes, the hot glue gun. Every girls intro into crafts. Let me guess, next hack uses a wood burning kit?
Wow! I've been paralyzed my whole life and this gave me the courage to get up and tie a noose around my neck!
That background music reminds me of that Spongebob episode where Squidward time travels and ends up in a dimension between space and time.
When a 4 dollar brick wall anchor is just too much...
Best thing in this vid was the bag.
If only ever someone invented wall plugs...
When your country is under embargo and you can’t even get drywall plugs
*the investor of the screw laughs in his grave*
You aren't unscrewing a bolt incased in hot glue like it were a mold. Also using the bold while the glue hasn't dried yet would be more effective and simpler.
Pro tip: This doesn't work.
Explanation: That plastic case you put inside the hole isn't just to avoid the screw to SCREW the wall (pun intended, but actually it has a mechanism wich expands once the screw goes in, locking the whole thing in place making it very hard to pull it out if it isnt unscrewed.
Haces muy buenos videos excelentes ideas Gracias por compartirlas Saludos desde México maestro
Evolution has some power lifting to do…
Plugs are cheaper to buy than a glue gun
All thats missing is elbow macaroni and glitter
That is civilization before fischer invented
I like this types of idea fantastic
Thing for handle purses: 1 dollar
GLUE GUN: 1K DOLLARS
It's not a bad idea but i don't imagine hot glue sticking well to the inside of drywall material.
That hot glue is probably more expensive then what you are trying to replicate
That’s got all the strength of a wet rich tea biscuit
Them: use 800rs glue gun💪
Us: use match stick 🤣💪😎(note: which is already used for on the gas stove)
Nice foam filled pack. I can tell by the way you held and moved it, it's not heavy at all.
Damn I just wasted my time watching this 🙄
Wall plug and screw is all that's needed, not a machine screw, a hole to big and glue that won't hold long
Don't do this to your drywall. Only cinder block,like in the video.
I liked the backpack...
So no plugs? Just glue?
Meaning that is holding barely much pressure inside the hole, and eventually will slide out
How much weight do you want this to hold? None? Ok hold my beer
10x more work and 1 tenth the durability of the $0.20 invention made to solve this problem.
Man what does appreciate how that’s at least going to hold for one second
Why is this better than using concrete anchors???
Anchors are literally a few cents each guy
I would be shocked if anyone actually thought this was a good idea.
You could just get a tool to thread wood. Like maybe nail a piece of wood to the wall and thread a hole you drill into it. This just looks awful, after a few days its gonna break especially with a hanger supporting a backpack.
Or you could just get screws.
A bit of yellow clean up wouldn't hurt, will you?
Damn the way the glue drips from the nut 😏😏😩😋
"Nailed it"
This has given me an idea…