THANK YOU! GREAT video sir. This was the final piece of my shack setup...Needed a lower key and swing for the other EQUIPMENT in the shack before going out the coax to the antenna....... THANK YOU AGAIN. Worked like a charm. 73's
Been looking for this. The President Lincoln II+ has a very simliar engineering menu and no information is being provided by the manufacturers. On the Lincoln II+, there's a BFO for all modes, and bfo for the other various individual modes as well. We've been changing the Lincoln settings by manually rotating the BFO knob for some, and adjusting the RF Gain knob and hitting the program button for the others. On the Lincoln II+, one has to pay attention to which modes can be displayed while in a menu item, to determine exactly what each menu item affects.
Has anyone else noticed how the S-meter on the AT5555N seems to be "stuck" in a vary narrow range? Mine will very seldom get above S9 even when multiple other listeners located at greater distance from a powerful station are reporting +10, +20 and higher readings. This radio needs a method to calibrate the S-meter. I've been searching for one and still haven't found it.
Hey Joe I have the AnyTone AT-5555N and I had the same question. What I did find was the S-Meter adjustment for SSB and AM/FM are not one the board. They have been replaced with a resistor of unknown value. If I find any more information I will post it here. BTW A big thanks to Nikos for this video...
yes I have the N2.. thats because someone messed up at the factory.. in the settings the range should gradually increase, INSTEAD it decreases after s9! i had to get my Signal generator out to adjust it on both AM/FM and USB LSB.. if you want me to do yours lemme know, but im in Canada, youd have to sip it here. DO NOT TRY AND ADJUST IT WITHOUT A Signal generator!!!!!!! I found this issue when my buddy drove up to my house and the signal was still S9 lol... Anyways with SG its an EZ fix if you know what your doin.
@@WPGinterceptor460Interceptor hat der georg 2 die gleichen Probleme mit dem S Meter ? Diese Funkgeräte haben die gleichen Platinen ? Mit dem Draht und Jumper ist es immer das gleiche.
I did a compete reset and I noticed a bit of difference on the TX RF meter... Could it be that this is the last step in tuning before it leaves the factory?? Anyway good found and very handy!!
with the unit off, push and hold MENU and MODE together as you turn on the unit, as soon as the unit turns on then release those two buttons and push left to right one at a time DW RB NB SCAN MEM EMG.. this will take u into service menu BUT the menus are differant they are not the same as this video!!!
Πολυ ωραιο βιντεο αλλα σε τι ωφελει ολο αυτο; Ειδα οτι το πειραξες κι ανεβασες τα watt σε διαμορφωση fm. Απο οτι βλεπω ειναι το παλιο 7900. Πηρα πριν λιγες μερες το 7900v που βγαζει απο την μανα του 40 watt σε διαμορφωση fm. Αν το πειραξω θα βγαλει πιο πανω; Τα υπολοιπα που γραφεις σε τι ωφελουν;
Καλημέρα αδερφέ, καλοπαιχτο το καινούριο μηχάνημα, καλύτερα μη πειράζεις τίποτα και να αφήνει και να απολαμβάνει κάποιος το μηχάνημα όπως είναι, όλα αυτά δε είναι παρά το μικρόβιο του χόμπι να ψάξεις να δεις που φτάνει, αλλά και πάλι επιμένω να μείνει ως έχει από το εργοστάσιο
Τα watt ανεβαίνουν και τρίμερ από μέσα αλλά δεν υπάρχει κανένας λόγος να το κάνεις τα 40 είναι υπεραρκετά, η διάδοση να υπάρχει και τα υπόλοιπα είναι εύκολα
How can I get better am results on low keys 2 watts and swing to 5 watts ,high little better 10 watts swing to 20 ,would like low to swing little better ,was gonna turn am mod but figured better ask 1st ,just got it yesterday ,did conversion but that's all
@@mickgatz214 Of course, my pleasure. It accurate enough to show less radiated power coming out of the antenna with a high SWR than the radiated power of a well tuned antenna. On 12 meters, the SWR is just under 2.5. That is not the best but will not destroy the radio. The radiated power shows around 35 to 40 watts. On 11 meters, the SWR is 1.5 to 1 on channel 1 and 1.2 on channel 40. The radiated power is about 50 watts. On 10 meters, 28.4 Mhz to 29.7, the SWR is perfect 1.0. Here I see a wattage of above 60 watts. I guess there is a circuit that takes the output power minus the reflected power and displays the estimated radiated wattage. I really like this radio a lot. Be cautious. Some nations do not want their citizens to have an amateur radio and CB radio combined. These freedom sucking nations pass laws just to micromanage and trap their citizens with fees. Please check with your local radio ministry to determine your rules in your nation.
@@tsolbergsx Στο 7900V δεν γίνεται με τον ίδιο τρόπο. Το μόνο που κάνει είναι να γεμίζει η οθόνη κατά το άνοιγμα και στη συνέχεια επανέρχεται εκεί που ήταν!
Mi amigo te agradeceria en el menu # 4 podrias darme los valores en usb , Lsb Solo presionando el modo aparecera solo me faltan esos dos para poder dejarlo alineado. Muchas Gracias
@@edinhobocorny9512 No , Solo los valores Originales y Parámetros de Fabrica del Menu Oculto. Asi Poder Tener una Referencia para poder dejar el mio Cerca al punto De Original. Muchas Gracias 73’s
Why you reach here if you don't find any point????any way we are not only operators we like search and reach the top spot of any machine we have, that's the point.
THANK YOU! GREAT video sir. This was the final piece of my shack setup...Needed a lower key and swing for the other EQUIPMENT in the shack before going out the coax to the antenna....... THANK YOU AGAIN. Worked like a charm. 73's
Fun fact:
This transceiver will cover 12, 11, 10, meters, 24.715Mhz to 30.125Mhz.
Please make a note of it.
is anything needed to make 12m available?
Been looking for this. The President Lincoln II+ has a very simliar engineering menu and no information is being provided by the manufacturers. On the Lincoln II+, there's a BFO for all modes, and bfo for the other various individual modes as well. We've been changing the Lincoln settings by manually rotating the BFO knob for some, and adjusting the RF Gain knob and hitting the program button for the others.
On the Lincoln II+, one has to pay attention to which modes can be displayed while in a menu item, to determine exactly what each menu item affects.
Has anyone else noticed how the S-meter on the AT5555N seems to be "stuck" in a vary narrow range? Mine will very seldom get above S9 even when multiple other listeners located at greater distance from a powerful station are reporting +10, +20 and higher readings. This radio needs a method to calibrate the S-meter. I've been searching for one and still haven't found it.
Hey Joe
I have the AnyTone AT-5555N and I had the same question. What I did find was the S-Meter adjustment for SSB and AM/FM are not one the board. They have been replaced with a resistor of unknown value. If I find any more information I will post it here.
BTW A big thanks to Nikos for this video...
ele vem certinho, não pode comparar com outro rádio
yes I have the N2.. thats because someone messed up at the factory.. in the settings the range should gradually increase, INSTEAD it decreases after s9! i had to get my Signal generator out to adjust it on both AM/FM and USB LSB.. if you want me to do yours lemme know, but im in Canada, youd have to sip it here. DO NOT TRY AND ADJUST IT WITHOUT A Signal generator!!!!!!! I found this issue when my buddy drove up to my house and the signal was still S9 lol... Anyways with SG its an EZ fix if you know what your doin.
@@WPGinterceptor460Interceptor hat der georg 2 die gleichen Probleme mit dem S Meter ? Diese Funkgeräte haben die gleichen Platinen ? Mit dem Draht und Jumper ist es immer das gleiche.
I did a compete reset and I noticed a bit of difference on the TX RF meter... Could it be that this is the last step in tuning before it leaves the factory?? Anyway good found and very handy!!
Bonjour bonne vidéo j ai une petite question et t il vrai que se poste se décalé en Fréquence quand il chauffe merci beaucoup pour ta réponse.
Hello no i have never had any problem with it
Como se ajusta a recepção dele que é muito ruidosa?
Tenho um Anytone 5555n2 com S7 de ruído, enquanto outros rádios S2.
Conseguiu melhorar o ruido ?
Ciao amico radiantista,ti scrivo dall'Italia,queste funzione di quanto fa aumentare la potenza in watt? Ciao grazie mille 😊
Ωραίο μηχάνημα φίλε μου!!.. καλό θα ήταν όμως να μας εξηγούσες τις λειτουργίες του.
Καλησπέρα φίλε μου στο 2:05 αναφέρω με κάθε επιφύλαξη τι κάνουν λειτουργίες, 73!!!
How do u access the service menu on the 5555n 2?
with the unit off, push and hold MENU and MODE together as you turn on the unit, as soon as the unit turns on then release those two buttons and push left to right one at a time DW RB NB SCAN MEM EMG.. this will take u into service menu
BUT the menus are differant they are not the same as this video!!!
why would you wanna mess with the hidden settings
Just exploring the machine
i have 1 and theres no way im going into all of that
@@tsolbergsx
Πολυ ωραιο βιντεο αλλα σε τι ωφελει ολο αυτο; Ειδα οτι το πειραξες κι ανεβασες τα watt σε διαμορφωση fm. Απο οτι βλεπω ειναι το παλιο 7900. Πηρα πριν λιγες μερες το 7900v που βγαζει απο την μανα του 40 watt σε διαμορφωση fm. Αν το πειραξω θα βγαλει πιο πανω; Τα υπολοιπα που γραφεις σε τι ωφελουν;
Καλημέρα αδερφέ, καλοπαιχτο το καινούριο μηχάνημα, καλύτερα μη πειράζεις τίποτα και να αφήνει και να απολαμβάνει κάποιος το μηχάνημα όπως είναι, όλα αυτά δε είναι παρά το μικρόβιο του χόμπι να ψάξεις να δεις που φτάνει, αλλά και πάλι επιμένω να μείνει ως έχει από το εργοστάσιο
Τα watt ανεβαίνουν και τρίμερ από μέσα αλλά δεν υπάρχει κανένας λόγος να το κάνεις τα 40 είναι υπεραρκετά, η διάδοση να υπάρχει και τα υπόλοιπα είναι εύκολα
@@tsolbergsx Ευχαριστω, ηδη το απολαμβανω.
How can I get better am results on low keys 2 watts and swing to 5 watts ,high little better 10 watts swing to 20 ,would like low to swing little better ,was gonna turn am mod but figured better ask 1st ,just got it yesterday ,did conversion but that's all
And BTW thank you for the video
the on screen SWR seems legit, but i'm not certain about the power meter......
It has a really good watt meter. I found it to be accurate.
@@indridcold8433 Thank you, Indrid Cold, I have One Unit Digital power watt meter for HF and UHF. ;)
@@mickgatz214 Of course, my pleasure. It accurate enough to show less radiated power coming out of the antenna with a high SWR than the radiated power of a well tuned antenna. On 12 meters, the SWR is just under 2.5. That is not the best but will not destroy the radio. The radiated power shows around 35 to 40 watts. On 11 meters, the SWR is 1.5 to 1 on channel 1 and 1.2 on channel 40. The radiated power is about 50 watts. On 10 meters, 28.4 Mhz to 29.7, the SWR is perfect 1.0. Here I see a wattage of above 60 watts. I guess there is a circuit that takes the output power minus the reflected power and displays the estimated radiated wattage. I really like this radio a lot. Be cautious. Some nations do not want their citizens to have an amateur radio and CB radio combined. These freedom sucking nations pass laws just to micromanage and trap their citizens with fees. Please check with your local radio ministry to determine your rules in your nation.
Φίλε Νίκο γεια σου, με τον ίδιο τρόπο γίνεται και στο 7900V;
Καλησπέρα, πιθανότατα να γίνεται δεν έτυχε να το έχω δοκιμάσει
Thanks Νίκο, θα το δοκιμάσω και αν είναι θα σου στείλω απάντηση. Να είσαι καλά!!!
Να Σάι καλά και εσύ φίλε μου, γράψε μας ναι για να ξέρουν και άλλοι χρήστες
@@tsolbergsx Στο 7900V δεν γίνεται με τον ίδιο τρόπο. Το μόνο που κάνει είναι να γεμίζει η οθόνη κατά το άνοιγμα και στη συνέχεια επανέρχεται εκεί που ήταν!
Mi amigo te agradeceria en el menu # 4 podrias darme los valores en usb , Lsb Solo presionando el modo aparecera solo me faltan esos dos para poder dejarlo alineado.
Muchas Gracias
Você descobriu algo como resetar o rádio amigo?
@@edinhobocorny9512 No , Solo los valores Originales y Parámetros de Fabrica del Menu Oculto.
Asi Poder Tener una Referencia para poder dejar el mio Cerca al punto De Original.
Muchas Gracias 73’s
Quiero si Los valores originales de fabrica amigo
Gracias.
super for destroy ur machine * of course u are a specialist* !
How reset rádio?
Love u from india
I hope that this video helped you have a nice time!!!!
And the point of this is????
Why you reach here if you don't find any point????any way we are not only operators we like search and reach the top spot of any machine we have, that's the point.
What a waste of time
Live with it
It was not as much a waste of time as writing out, "What a waste of time," because you had nothing to add.