I just ordered the abs delete kit for my GTR Quick question is do you need to do anything about adjusting the front vs rear brake balance after you remove the abs block, Or is it just plug and play? And the brake balance should be as before
On the R34 GTT, my friend has ABS sensors built into the hubs. Seeing as we went and purchased your whole wide angle kit, and are forced now to get rid of ABS, what do you do with the sensors that go to those front hubs? Please help us!
@@mitsuracer87 Its what I ended up doing. Now I have to remove the dash to remove the light from behind the ABS on the dash. One thing leads to the next thing. I am slowly getting angry.
I'm removing my abs on my s13 does this kit work with my set up. I'm struggling to follow how the lines will match up since you use an s14 in the video
Maybe l'm wrong but normally all non-abs cars have a regulator for the rear brakes...whith the delete kit the car will have the same braking power on all over the wheels or no? Thanks
Hey gktech are you guys sure the rear port on master goes to front brakes? On non abs Masters the 2 ports on the front go to the fronts and the rear port is rear brakes. Why would this change to the abs master?
Hey dude, No sorry, they have a completely different ABS setup, however, we do plan on developing an ABS unit for the Z32 chassis. You are welcome to send us an email at sales@gktech.com so I can put you on the waiting list!
If you are running an in-line setup, all lines and fitment is the same, except for the line that runs from the rear brake line port to the block on the chassis rail. That line needs to be replaced with the inline setup!
This would have made my life so much easier last week
Excellent! Thanks Officer Dan!
Man. Videos like this sell product so fucking well. Just purchased. Thanks!
THIS is how you youtube 🤣
Awesome video. Thank you 🙏
Solid video 👍🏾
Super easy to watch video guys, thanks for uploading corona free videos!
Thanks for the support dude, that is the last thing we want to spread!
Please make an ABS delete kit for the NA miata
Is this available for a 88 Chevy truck?
Can I do this on my 2009 Mitsubishi Lancer 2.0 ES automatic trans??
I just ordered the abs delete kit for my GTR
Quick question is do you need to do anything about adjusting the front vs rear brake balance after you remove the abs block, Or is it just plug and play? And the brake balance should be as before
No need to do anything for brake bias, it is just plug and play!
What’s the Torque Spec for the Banjo Bolts that seal against the brake master cylinder. ?
tight
Do you guys sell the short line with 2 male sides individually or possibly as a 2 pack?
Can you make the kit for NB MX5?
Can I buy the commentary?
On the R34 GTT, my friend has ABS sensors built into the hubs. Seeing as we went and purchased your whole wide angle kit, and are forced now to get rid of ABS, what do you do with the sensors that go to those front hubs? Please help us!
Throw them away?
@@mitsuracer87 Its what I ended up doing. Now I have to remove the dash to remove the light from behind the ABS on the dash. One thing leads to the next thing. I am slowly getting angry.
I'm removing my abs on my s13 does this kit work with my set up. I'm struggling to follow how the lines will match up since you use an s14 in the video
If unsure contact us directly VIA the website or our Facebook page. The team can assist!
Maybe l'm wrong but normally all non-abs cars have a regulator for the rear brakes...whith the delete kit the car will have the same braking power on all over the wheels or no? Thanks
No sorry, all OEM brake master cylinders regulate internally which automatically splits the brake bias front to rear, so you are good to go!
@@gktech very well! Thank you
nice exelent
Thanks dude!
is this kit is legal i mean certified? can u plz help before i buy tnku
Hey gktech are you guys sure the rear port on master goes to front brakes? On non abs Masters the 2 ports on the front go to the fronts and the rear port is rear brakes. Why would this change to the abs master?
Hey dude!
Yes, we are sure, the ABS vs non ABS master cylinders are different internally and it is just based off Nissans design unfortunately!
Can you make a kit for the 2004-2011 Mazda RX8?
It's nothing we have plans on doing, sorry.
Hello... Can i buy this for Mitsubishi triton???
Sorry, we don't have them.
This will fit a gx100 toyota chaser 1996 ?
We cannot confirm fitment on the Toyota chassis.
Will the abs light be on the dashboard after the install?
It will yes
So it definitely won't fit the 300zx Z32 also; I looked at the description already.
Hey dude,
No sorry, they have a completely different ABS setup, however, we do plan on developing an ABS unit for the Z32 chassis. You are welcome to send us an email at sales@gktech.com so I can put you on the waiting list!
Wait so will it not work with a z32 master on a 240sx hatch?
Hi: These kit came for a 96 C1500 GMC Sierra ?
Sorry they do not! Just for the vehicles listed in the description!
Does this kit work with the r32 GTR as well?? Definitely deleting the abs
Yes, we can confirm that they do fit the GTR!
@@gktech awesome!!
"fit" is a very relative statement apparently.
Proportion valve?
We don't believe it's required for S/R chassis.
How would I go about plumbing a hydro into this set up?
If you are running an in-line setup, all lines and fitment is the same, except for the line that runs from the rear brake line port to the block on the chassis rail. That line needs to be replaced with the inline setup!
does this work on a 2003 g35 sedan?
It does not, we don't have an ABS solution for the G35.
1:52 hahah
1:30 who dat
The question is why u delete the abs🧐😂
It is unreliable in drifting application.