I would like to know whether this can be connected to alarm. If not please advise a product that can be used for alarm. -Alarm like hooter/siren with high volume.
You can connect this to any device less than 500 watts ths you like to activate.. so an alarm.hooter etc can work on this device ... yes... thank you for the question please do subscribe thanks
Thank you for the reply. Also could you please clear my few more doubts as I dont have, in depth knowledge in electronics. 1. How can I adjust the time and lux when I am connecting to hooter. 2. Please advise, what is the range of sensor for this product. 3. Suggest a good motion sensor if u can - may be a link or product name where I can buy it.
is it possible connect to ceiling fan ?, i want to save electricity. my children always 'on' fan and going outside for play whole day fan running for nobody but i check on RUclips nobody made a video for ceiling fan , is it will fail? or fans movement make sensor works again ...may be fan will be nonstop?
I have a same unit installed in several rooms. I would like to disconnect the sensors as they are not convenient. Can you please suggest how to rewire so that the sensor is disabled and lights operate with the on/off switch only. Thanks
Oh sorry to hear., if you want to bypass this device you will have to just directly connect the power coming from the switch on to the lights. Its hard to explain(better get an electrician) but right now seems like the live wire goes to the bulb via the sensor. So the sensor live wire input and outgoing device output wire need to be connected. You can ignore the neutral wire as your lamp already is connected to it. Don't do it if your unsure.
Hello, I have a bathroom setup. Pull cord switch, isolation switch for fan, then fan. I have installed a PIR light however doesn’t seem to shut off why? It’s either setup as flashing or permanent
Thanks for your review, liked your balcony project!
Samson Cj thanks Samson! Please do subscribe 😊
Good keep it up
simple and understandable. thanks
Balamurugan B thanks Bala, please do subscribe 🙂
I like the spray paint cans you are using, what are those and where can you buy them? Specifically the silver one
dude, when you stop talking for 2 seconds there is no need to turn up the chlidrens party background music.
Edster 😂
Sir please put ..sensor LCP control panel please
I would like to know whether this can be connected to alarm. If not please advise a product that can be used for alarm. -Alarm like hooter/siren with high volume.
You can connect this to any device less than 500 watts ths you like to activate.. so an alarm.hooter etc can work on this device ... yes... thank you for the question please do subscribe thanks
Thank you for the reply. Also could you please clear my few more doubts as I dont have, in depth knowledge in electronics.
1. How can I adjust the time and lux when I am connecting to hooter.
2. Please advise, what is the range of sensor for this product.
3. Suggest a good motion sensor if u can - may be a link or product name where I can buy it.
Can the stereo, exhaust fan and lights be turned on at the same time?
Yes
360 deg sensor ? Or only works facing the front?.. around 15 feet.want ffor staircase..will the sensor work?
360 so all round detection
is it possible connect to ceiling fan ?, i want to save electricity. my children always 'on' fan and going outside for play whole day fan running for nobody but i check on RUclips nobody made a video for ceiling fan , is it will fail? or fans movement make sensor works again ...may be fan will be nonstop?
Of course.. but not recommended... it may keep turning off
Price of sensor................?
Approximately 500
If a person keeps standing there say engrossed in a conversation..will it keep on or switch off after Set time..?
It will stay on ... in some cases slight movement is required
@@rtechreviews appreciate the quick reply..one more thing is this better or to get one of those motion sensor bulbs? Advice? Suggestions?
What do u prefer..this or one of those motion sensor led bulbs?
how to use
I have a same unit installed in several rooms. I would like to disconnect the sensors as they are not convenient. Can you please suggest how to rewire so that the sensor is disabled and lights operate with the on/off switch only. Thanks
Oh sorry to hear., if you want to bypass this device you will have to just directly connect the power coming from the switch on to the lights. Its hard to explain(better get an electrician) but right now seems like the live wire goes to the bulb via the sensor. So the sensor live wire input and outgoing device output wire need to be connected. You can ignore the neutral wire as your lamp already is connected to it. Don't do it if your unsure.
Nice
Does it support DC light
Nope AC only
Hi. Can we conncet more than 1 light with one sensor?
Yes 😊 keep the total load under 1000 watts. Please do subscribe 😊
@@rtechreviews thanka for the quick response. Subscribed
How much area it cover?
15 feet appx, please do subscribe thank you 😊
Good
Can I use this lift fan control
Yes you can! Please do subscribe thanks
Hey bro. Nice explanation. Just a question. How did you fix it on the ceiling?
Hey buddy sorry for the late reply.... I used a metal wire and just used cable ties for the clamp 😊 not the best fix though
Hello, I have a bathroom setup. Pull cord switch, isolation switch for fan, then fan.
I have installed a PIR light however doesn’t seem to shut off why?
It’s either setup as flashing or permanent
Hi Adam, can you rephrase the question...make sure that the PIR sensor is not facing the light directly.
can I use it with a fan?
Rajkishore Maity yes can be used with anything that's consumes less than 1000 Watts appx
Indiatechnews com thank you sir.
Rajkishore Maity please subscribe sir
Are you sure that they are not made by China? I think they are Chinese made too with Indian label
In bedroom sensor can turn on if we sleeping?
Nope you cant
kya isme alarm lga skte hai
Hi sir, if I need more then 1000w , now, what we do???
No model is supporting more than 1000 watts sir. This is max that they have. What device do you want to use?
is this a motion sensor or day night sensor ??? i guess day night!!
Its both ☺️
hello sir I want how to direct this timer
I have set the sensor at 5 minutes but the light doesn't shut off and stays forever any help
Ihab Ahmed hi Ahmed. May be the device is facing a light source or something that is emitting heat. Please check
Indiatechnews com The light is facing up and sensor is facing down, the wall temperature is about 35 degree C
Ihab Ahmed k wall temp is a bit higher than usual may be that's causing the error
good job
please give 4 vire viering diagram
Please watch the video near the 3 minute mark
That music is annoying!
🙊
how to use
Output volt?
Hi Abhi, upto 1000 watts they claim
how to use