Starting line- curve lever open- half a inch to a inch lever closed in the middle guard #1 1 inch up off gaurd #2 another inch off gaurd #1/12 Line up c cups Done!!
Learning how to cut my own hair. I’m an artist who paints. I love to take pictures with my artwork. So it gets expensive getting 2 haircuts a week for my photos. This video is definitely informative!
This is one of the best explanations I’ve seen. A lot of men don’t know how to explain shit lol or they’re more worried about selling the product in the video
I find it amazing how majority of barbers and casmotologist on RUclips use plastic guards but rarely do you find one who uses just Detachable blades on the cut.
@@xadrian-.-blessindopefeind3169 Barbers make enough to where they can afford the detachable blades. No excuses on having a set on hand. I’m a barber and I have a near complete set.
trimmer guide Bald Out Lever open no guard Lever closed no guard 1 Guard open 1 guard closed 2 open 1.5 open to close Clipper over comb to blend top Line up c cups
I’m gonna start cutting and this video makes it look easy but I know for a fact I’m gonna be struggling lol but all the best to me, thanks for this video!🙏🏼
Dont dig in so harshly . scoop out or flick out in a light flick motion . If u dig in too hard itll create a new line u dont want and yes use your corners of the clipper.
Don’t fully close the lever. Fully closed up to the line, half open on the line, all the way open slightly higher. Then switch guard to one above and continue the process. Also use the corners of the blade flicking at the line gently, don’t go above the line, just go “on it”. Use thin combs as a guard too. Just work slowly until it becomes muscle memory
They are style crafters absolute alphas or the one that starts with an R but they are basically the same with the stretch bar so it opens wider than normal. My favorite clippers for sure.
Play around with your 1 guard and its lever open it and constantly adjust to it to blend most people dont have guards with halves just regular 1,2,3,4,5,6,7,8
Starting line- curve
lever open- half a inch to a inch
lever closed in the middle
guard #1 1 inch up off
gaurd #2 another inch off
gaurd #1/12
Line up c cups
Done!!
Super underrated
Thank you🫶🏼😩
How much mm is #1? How does it work
@@semihcetinkaya98401/2 inch i think
Thankyou bro
Legit this short video I finally nailed my own taper over the dozens of other long complicated videos. Sick.
Saved me $150 bucks! Followed the instructions and it actually worked.
Open
Close
Guard 1 Lever open
Guard 2 Lever open
Guard 1/2
Is it 1 1/2 or just 1/2?
1 1/2
@@SlickzFN7 1 1/2 open or close?
@@wu-tang3441 open
@@wu-tang3441open then close
Taper is such a nice and quick cut that looks nice. Definitely my go to.
I'm literally looping this video 😂 while cutting my hair
Wich clipper do you use?
Same 😂 first time low-key turned out good
Learning how to cut my own hair.
I’m an artist who paints. I love to take pictures with my artwork. So it gets expensive getting 2 haircuts a week for my photos.
This video is definitely informative!
Keep it up
Looks amazing, thanks!!
The Marty blendz guards 👌🏼
Desde Venezuela que Dios bendiga tu talento.. 🇻🇪
Donde puedo conseguir esa maquina?
Bruh your clippers are so dope
They’re just babyliss and rebels bro lol
Using the corners is really clutch fr.
Fantastic Cut ✅
God bless ☝️☝️☝️
Thank U 👏👏👏👏
Is it the same thing for the back right?
For the 1 and a half guard what happens if i dont use that? Do i buy it seperate
Okay my Walmart clippers aren’t cutting this good 😂
No deadass, where is the "Taper on a Budget" tutorial lmao
Did you zero gap em?
Zero Gap
Exact same thought 😂 u got the yellow one with the grip ?
It ain’t bout da clipper
This is one of the best explanations I’ve seen. A lot of men don’t know how to explain shit lol or they’re more worried about selling the product in the video
I find it amazing how majority of barbers and casmotologist on RUclips use plastic guards but rarely do you find one who uses just Detachable blades on the cut.
cus it’s a really expensive and not convenient
@@xadrian-.-blessindopefeind3169 Barbers make enough to where they can afford the detachable blades. No excuses on having a set on hand. I’m a barber and I have a near complete set.
whats the point or benefit of using detachable ones plastic ones work just fine
Even a $500,00 guitar won't make you play as good as Jimmy Hendrix.
The tool doesn't matter if you don't have the skill.
@@estoylaroca your right on the skill but to how do you develop the skill? By just doing it.
trimmer guide
Bald Out
Lever open no guard
Lever closed no guard
1 Guard open
1 guard closed
2 open
1.5 open to close
Clipper over comb to blend top
Line up c cups
Как называется этот причёска? Скажите по братски
Taper fade
O en república dominicana se llama los guallaitos
Thanks for the videos man
hi, but youre also brushing the hair down after each guard cutting?
You didn’t use a .5 guard at all to take out the line between the no guard lever open and the 1 guard lever open?
Thanks bro fr this came in handy 💯 keep going 💪🏼
damn bro i am finding these videos way better than the long vids !
🫡
It would be the same thing for the back right ?
I’ve never cut my own hair until today. And had no clue how to. This video helped and I low key did a decent job lol
So good teaching
You make everything so easy thanks bros
I’m gonna start cutting and this video makes it look easy but I know for a fact I’m gonna be struggling lol but all the best to me, thanks for this video!🙏🏼
Looks fire I might have to try this when I get my clippers
Great video
Bro wtf I keep trying this and the hard line only gets higher
Use the corners of the blade to take out the line. This helps avoid raising the blend
Dont dig in so harshly . scoop out or flick out in a light flick motion . If u dig in too hard itll create a new line u dont want and yes use your corners of the clipper.
Be patient and imagine how you want the taper to look first. Then put it together
Don’t fully close the lever. Fully closed up to the line, half open on the line, all the way open slightly higher. Then switch guard to one above and continue the process. Also use the corners of the blade flicking at the line gently, don’t go above the line, just go “on it”. Use thin combs as a guard too. Just work slowly until it becomes muscle memory
Depends on your clippers alot ngl
Love yo videos bro
very simple and nice
Same process for the back of the head?
lIMPORTANT what did he got on the top and sides like a 6 on top ???
That's clean!
Muito lindo o trabalho 🎉🎉🎉🎉🎉❤❤❤❤
Senior man ❤❤
Line
Lever open
Close for line to not be visible
1 guard open
2 guard open
1.5 guard open
Clipper over comb
Finna test on my bro
how'd it go?
Is this a mid or low taper
Men with this cut are mamas boys. I can’t explain it.
How do I do this with a clipper that has just guards and no levers... or is that just not doable
What clippers do you use.
They are style crafters absolute alphas or the one that starts with an R but they are basically the same with the stretch bar so it opens wider than normal. My favorite clippers for sure.
@@zero_linez it’s only cause of the adjuable click lever bro 👌
is this a low or mid?
Nice! 👍🏾💈😎
What kind of taper is this
Packaging tape
I freestyle my tapers with Andis fade master and clipper over comb for blending. Takes half the time and looks just as good.
Is it easy to learn the numbers on the clipers like what they do and shi
So helpful.
I saw those Martyblendz guards!
What trimmer did you put the gold fx blade on ? I had to re watch it a few times lol😂
Lo pro cuz
Is it normal that I learned this in one day thanks to this video
Good cut
Dope haircut 💇🏽
Just wow😊
Nice work brother 👏 💪
Ty bro
Can you do back side?
No point in trying to keep edges dark if you just going to push it back … smh
Right smh
Every goddamn barber do this
Damn sure PUSHED it BACK
bro that’s how you make it sharp
@@txblendz2407 Barber was taking too much though. The gentleman have healthy head of hair and there was no need for pushing his hair line back.
This a mid or low taper ?
Can yu still do it without 1.5 guard
is this the same for the back?
If i make the guide lines should i also use the corners of the clippers?
Can you show how to do the line up on the forehead please
Very nice 😊
Nice taper
Is your clipper zero gapped?
What's that clipper brand
mantaaapp brother ❤
Can i ask what is the mark about your trimmer?
babyliss lo pro fx trimmer ~ $150 with the gold fx blade, ~$45
a better trimmer imo is the andis t outliner corded ~$60
What brand are the attachments?
Marty blends
That would be a low raper correct?
What clippers are those ?
Rebels mija
Too 🔥
How do you cut it so it’s not hella bulky in the back
Hit it with the 2 to debulk the area
What Clipper is that
Nice look
Thinning scissors damage is crazy
Is there a video for the back of the head taper
Im wonderin that too
is this a low or mid
I'ma try to learn with this vid
Left bro crispier than some Popeyes extra crunchy mild 2 piece combo with a leg and thigh 🔥
Wowww 😊
What if I don’t have a 1.5 guard
Play around with your 1 guard and its lever open it and constantly adjust to it to blend most people dont have guards with halves just regular 1,2,3,4,5,6,7,8
@@jeremyochoa1839 thank you 🙏
I like your makrking 🔥
You can use wahl comb on rebel clippers?
I need this track ❤
What those clippers called
Tank you
What number is the blue guard ??????
2
Can you do a shadow low taper?
Trimmer?
Clean 👏🏾👏🏾
What is this beat called and this video is very helpful
Nice
Goat
What the guard he uses
AAAAAAAAAAAAAAAAAAASSSSDDDDSSAAAAAASSAAAAAAAAAAAAAAAAAAAAAAAAAASSSSDDYY