This helped so much because I have 3 boys and they all want the edger so my skills were rusty when it came to that but because of your awesome totorial and tips I was able to master it so thank you! 😊
I don’t get it sometimes he says to blend in you have to “come in open and close it little by little” but today he said “we’re gonna start blending in lever close” so which one is the best way to start?
If you’re still learning fading up is a lot easier. You make your initial guidelines with the lever open, and then start closed at the bottom of your section you cut and open gradually after that
Best to get clippers with a click lever as a beginner so you can keep track of the length you are at and each lever click will be a part you go up a bit more with
Yo them jrl going hard you motified your clipper? Bro your cuts are always so fresh!! learned my process from you fam 💯 May God Bless You & The Fam Reading 🙏
I just started my journey and i just cut my first mannequin i did a low fade but it cane out alright my cousin is going to let me practice on him and he wants a low taper this is definitely gonna help!! 👌🏼
Just grab clippers and trimmers and start cutting friends and familys hair . They make it look easy but it's different ones u get to hold them for the first time
You use the magic clip which opens up to a .5 on one side of the head and then the JRL which opens up to a 1 on the other side of the head. How does this not affect the evenness of the haircut?????
It’s a JRL onyx it has a fade blade. And even the normal jrl doesn’t open up to a full one and even if it did the gradiente and final result is what is even, the steps are irrelevant if the results are the same.
@@matthewtestino4222 if aware I have one, it has a faper blade and definitely opens up to a. Full one. I’m asking because he basically used the same steps on both sides with each clipper
How do you like know what length you're at when you shave over the comb? Is it just practice? I try and cut my own hair (which is difficult bc of blind spots) but I never really understood how to do that
I bought some JRL onyx clippers but returning them. Didn’t blend well for me, also got the Babyliss FX ones the bottom blade jumps and you can’t zero gap them smh so returning them too
so basically you go .5 1.5 2.5 and then use the ones you didn’t? those being 1 and 2? and then anything else if just closing the lever and then using thinners for a better transition?
How come on the right side you only sectioned off the fringe and on the left side you sectioned off the parietal ridge as if you were cutting a under cut? I think that’s why the left side was longer when you were connecting the top to the sides…
Is this considered a mid taper?? Cause I’m learning to cut hair and I just need to know everything and I’m starting with this cause everyone wants mid tapers if it is?
My son started wanting this haircut so here I am learning it.
great parent
Me too 😅😊hope I get it
Ur a good dad 💯
lol same
Right there with you 😂😂
Best video tutorial on the channel
You did such a good job with a stressful head of hair
Nailed it! Made it way easier then some of these tutorials in this cut. Thx
Ngl this is one of the best fades I’ve seen in a minute
cap
@@STZYPROD why cap what couldve been better
Most consistent barber out ere 🔥 appreciate u mannnnn
This like my 10th time watching this tutorial, this cut is too fire 🔥
Did two this week end had to get help in one and the second. Came out alright !!!
This helped so much because I have 3 boys and they all want the edger so my skills were rusty when it came to that but because of your awesome totorial and tips I was able to master it so thank you! 😊
I’m still in school. This was helpful for the hair texture and formation.
I don’t get it sometimes he says to blend in you have to “come in open and close it little by little” but today he said “we’re gonna start blending in lever close” so which one is the best way to start?
If you’re still learning fading up is a lot easier. You make your initial guidelines with the lever open, and then start closed at the bottom of your section you cut and open gradually after that
Best to get clippers with a click lever as a beginner so you can keep track of the length you are at and each lever click will be a part you go up a bit more with
It goes to prove all hair textures need different attention and approaches 💪🏻 keep grinding brother 🤙🏻
its two diff ways, fading down will give you a more blurry result
blend down (open to close)from the bulk(2-1 guard) blend up (close to open) from the bottom of the taper (no guard-half guard)
that hair texture ain’t easy, u made it look easy 😂
What type of hair is it ? I got the same thats why im asking haha!
@@WoodBlockProductionjust thick and straight my hair used to be like that shi thick and curly now though
Being N barber school N watching these videos now; just hit differently
This is by far the best tutorial very impressive
Jesus is king
3 in 1 shampoo
Jesus is messenger
Jesus peace be upon him was a prophet
No
Amen
This is so helpful! I'm in cosmetology school but they are not teaching us enough barber techniques. I will try this today on my son's curly hair.
How did it turn out
howd it go
Excellent work my friend👏🏻
this is how he left living!!!!! great cut bro
LMAO cut was fire
Yo them jrl going hard you motified your clipper?
Bro your cuts are always so fresh!! learned my process from you fam 💯 May God Bless You & The Fam Reading 🙏
3 months later bro. And I'm wondering the exact same thing.
it looks like he. has the faper blame on
Amazing clear and concise narration, brilliant job 👏🏼
BRO SO GOOD I LOVE THIS 😁😁🙏🏽🙏🏽
If you don’t have a half guard for the clipper, should you rather use the 1 guard for the clipper, of the half guard for the trimmer
ive been finding how to make a taper for some weeks and you were the one that best expalined ut
I just started my journey and i just cut my first mannequin i did a low fade but it cane out alright my cousin is going to let me practice on him and he wants a low taper this is definitely gonna help!! 👌🏼
clean one bro been cutting for 16yrs and battle at the az barber expo much love. 💪🏻💯💈
This is my son's favorite hair cut.
Thank you for your educational video!
❤❤❤❤❤Steven tavarez 🤙🤙🤙🤙🤙🤙🥰😘😍🤩😋🤙🤙🤙🤙
Yo bro I want to learn to cut hair do you know where to start from 😊😊
Just grab clippers and trimmers and start cutting friends and familys hair . They make it look easy but it's different ones u get to hold them for the first time
You’re so lucky to be going!! I really wish I could. Enjoy your time and to anybody else going too 🥹🥳
Super clean idol. Nice tutor😊😊
Jooooo this cut was clean bruh
🔥 cuz as always
Amazing effort
One of the best
I love you so much and I learn these and I'll give my customers a lot of thanks to you, i hope you'll bring some new hair style to us....🖤❤️😊
Dear client , be loyal to your barber😅😂
20th time watching this video cause my my clients get this cut😂
super clean as always
Thank you , nice explanation👌🏼
🔥 bro. Did you modify the JRL blade at all? I like how you used multiple machines, giving us a look at what they can do.
You use the magic clip which opens up to a .5 on one side of the head and then the JRL which opens up to a 1 on the other side of the head. How does this not affect the evenness of the haircut?????
It’s a JRL onyx it has a fade blade. And even the normal jrl doesn’t open up to a full one and even if it did the gradiente and final result is what is even, the steps are irrelevant if the results are the same.
@@matthewtestino4222 if aware I have one, it has a faper blade and definitely opens up to a. Full one. I’m asking because he basically used the same steps on both sides with each clipper
Lovely job ❤
Perfect rapper ❤
You're damn good with the explanation
How do you know how to angle the comb when doing clipper over comb? Is it just angled enough to where only about 1/4 inch of hair sticks out the comb?
Thank you so much for this video!
🌹❤️🙏🏻
This why imma go see my barber this morning to get me right
🔥🔥🔥🔥 I struggle the most with sectioning and clipper over comb any tips to get better on that ?
Sick tutorial bro
So good!!
Thank you very much 👊
Nice my favorite ❤
How do you like know what length you're at when you shave over the comb? Is it just practice? I try and cut my own hair (which is difficult bc of blind spots) but I never really understood how to do that
Cheers helped a lot
Goated! 🫡
Thank you showing me low fade beautiful haircut
I have a question do we need to have too have a 1 1/2 guard?
I bought some JRL onyx clippers but returning them. Didn’t blend well for me, also got the Babyliss FX ones the bottom blade jumps and you can’t zero gap them smh so returning them too
Should I zero gap the wahl magic clips?
Nice cuts clean and sharp
Nice clear video- thanks
so basically you go .5 1.5 2.5 and then use the ones you didn’t? those being 1 and 2? and then anything else if just closing the lever and then using thinners for a better transition?
I have very thick fingers dose this infect setting the taper guidelines???
How come on the right side you only sectioned off the fringe and on the left side you sectioned off the parietal ridge as if you were cutting a under cut? I think that’s why the left side was longer when you were connecting the top to the sides…
Why did you change clippers from the back to the side Taper?
Is this considered a mid taper?? Cause I’m learning to cut hair and I just need to know everything and I’m starting with this cause everyone wants mid tapers if it is?
What hair cut do I ask for if I want this hair
Can you still do it even if you don’t have half guards?
What guards are you judging in the onxy ?!
What is the name of the little hair dryer?
What do i do with the part the connects the side with the back, the behind ear
Clean ass cut , how long did this cut take?
I love this hair cut how much for Indian rupee?
Nice haircut
Yo what do you do if you don’t have a half guard?
ending: this is how he left leaving lol looks good tho!
Could you have just done clipper over comb instead of trimming with scissors all around ?
Why did yoy change your clipper after you finished the back?
Вітання Лойку !🎉
Якщо відхід Лойка ще можна витримати, то без аналітика мені не цікаво дивитись 😅
What brand is your trimmer?
yo does a low and mid taper have the same steps?
Your courses are only online?
Deberías hacer tutorial en español Brother
Why change clipper for the back?
What trimmers you using
this content enrages me
What are some good clippers to use for beginners?
Wahl magic clips
What trimmer do u use
I feel like better use the down and up word than OPE AND CLOSE:-(
What is this hair cut called
what taper is that ?
mid taper
I want to join the class
He came in looking like a bum and left out looking like King Charles 😂🔥🔥👍
What barber is that I wanna go
You all can turn to Christ if you havent God bless
Do not think about Christianity
What kind of haircut was that
What is this hair type called ? Same as me
Thaaaaaaank yooooooou!!!
Eta cukuranna ngaranna naon mang?
Thank you boss