Just built in this case myself. You oriented the radiator correctly to the way Lian Li recommends the best cooling config, so no worries on that. Unfortunately one of the provided case fans from Lian Li had a shot bearing that I didn't discover until I spent hours taking apart my old pc and putting the new one together. Now I have to see if they'll replace just the fan so I don't have to return the whole case to microcenter.
I love your filming honestly, its so much easier to get a sense of what the case is actually like and more "realistic" looking than all the fancy camera work the top PC channels have. I think its the raw look and lack of filters, although it would have been nice to see a little more in some shots, it felt like I the top view in some shots was cut off, and i wanted to see more of what was around it, such as when you installed the GPU. It's a fantastic case tbh. I've seen several reviews on it and there is a lot to like about it. My main complaints would be the ugly riser cable, and concerns about very little to no direct airflow over the motherboard. I don't like the separate rear intake fan either. If they make a v2 I'm sure it will be badass. Would have loved to see a build with a motherboard with back connectors as well, since this case supports that. Excellent tip about removing the window film before installing it, I have never heard of anyone think about that, even myself, and I worked as a mech engineer at a place that specifically had anti static tape because the tearing off of such tape/film releases tons of ions or whatever it is that charges it. The "Hawk Tuah" and grossly incorrect use of the word "enthralled" had me dying btw 😂 you've got a future in this my friend, keep grinding!
Was anyone else watching him plug the power into the gpu yelling "cable tie the pigtail connectors, that'll neaten it up"? 🤣🤣🤣 good build video though. Very informative 🙂
I commend you for picking very good AI voice for your video. Most creators usually use very cheap voices which drives me crazy. As for the case and build - one of the best detailed builds I've seen in a while. I'm interested in that case and you video answered practically all of my questions.
Lian Li makes some nice cases. So does phanteks. So much for that deepcool build eh. Lol. That's a real bummer. I was gonna grab that mystique but went with the Arctic Liquid Freezer iii 360 instead. Can't wait for the next video! Great job Bud.
Canada doesnt have the sanctions on deepcool but the case that was getting sent here probably got intercepted somewhere on the USA/Canadian border 🤣 . I do have the mystique though sitting here.
@Renegade_Rabryn yea that mystique is the only other AIO that fully goes head to head with the LF iii. I'm not big on the LCD screens because it requires software to use it. But I'd make an exception for that AIO.
Not sure i like putting the gpu in the front like that with all the exhaust going right into the case like that, would really like to see temps and optimization
Nice video - In the future - it would be nice if the camera was a little farther away / not zoomed in as much - had to stop watching because I was getting motion sickness from the screwdriver ha-ha.
I love your videos, and I apologize if this is rude, but the whole purpose of a build video is to see all the parts being built 😢 but besides that I love your videos thanks for sharing
Really handy video. Great to see all the space for the radiator. Looks like it can take quite thick radiators. Thank you.
that case is sweet and that thing-a-ma-bob for the thing-a -ma -gig is nice for that behemoth of a card
You're speaking my language man haha
Just built in this case myself. You oriented the radiator correctly to the way Lian Li recommends the best cooling config, so no worries on that. Unfortunately one of the provided case fans from Lian Li had a shot bearing that I didn't discover until I spent hours taking apart my old pc and putting the new one together. Now I have to see if they'll replace just the fan so I don't have to return the whole case to microcenter.
I love your filming honestly, its so much easier to get a sense of what the case is actually like and more "realistic" looking than all the fancy camera work the top PC channels have. I think its the raw look and lack of filters, although it would have been nice to see a little more in some shots, it felt like I the top view in some shots was cut off, and i wanted to see more of what was around it, such as when you installed the GPU.
It's a fantastic case tbh. I've seen several reviews on it and there is a lot to like about it. My main complaints would be the ugly riser cable, and concerns about very little to no direct airflow over the motherboard. I don't like the separate rear intake fan either. If they make a v2 I'm sure it will be badass. Would have loved to see a build with a motherboard with back connectors as well, since this case supports that.
Excellent tip about removing the window film before installing it, I have never heard of anyone think about that, even myself, and I worked as a mech engineer at a place that specifically had anti static tape because the tearing off of such tape/film releases tons of ions or whatever it is that charges it.
The "Hawk Tuah" and grossly incorrect use of the word "enthralled" had me dying btw 😂 you've got a future in this my friend, keep grinding!
You go into detail like no other channel does imo.
Use a bit of Mothers chrome polish on your scuff mark at the cpu AIO will work like magic.
Thanks
Interstellar PC BUILD is🔥🔥🔥🔥
Was anyone else watching him plug the power into the gpu yelling "cable tie the pigtail connectors, that'll neaten it up"? 🤣🤣🤣 good build video though. Very informative 🙂
Really like this case, it's so tall and slender
I commend you for picking very good AI voice for your video. Most creators usually use very cheap voices which drives me crazy.
As for the case and build - one of the best detailed builds I've seen in a while. I'm interested in that case and you video answered practically all of my questions.
Please tell me you're joking
Lian Li makes some nice cases. So does phanteks. So much for that deepcool build eh. Lol. That's a real bummer. I was gonna grab that mystique but went with the Arctic Liquid Freezer iii 360 instead. Can't wait for the next video! Great job Bud.
Canada doesnt have the sanctions on deepcool but the case that was getting sent here probably got intercepted somewhere on the USA/Canadian border 🤣 . I do have the mystique though sitting here.
@Renegade_Rabryn yea that mystique is the only other AIO that fully goes head to head with the LF iii. I'm not big on the LCD screens because it requires software to use it. But I'd make an exception for that AIO.
I hate the tiny port to push your monitor cables in my hdmi, cables are think, and i dont think all 3 will slide in
The bourbon reference got the "Like" button.
Would a soundblaster pci card fit in that case?
Not sure i like putting the gpu in the front like that with all the exhaust going right into the case like that, would really like to see temps and optimization
Very Nice.
nice pc case bro..
How is the noise?
i can’t even screw the psu thumbscrews in
Nice video - In the future - it would be nice if the camera was a little farther away / not zoomed in as much - had to stop watching because I was getting motion sickness from the screwdriver ha-ha.
Lian li A3 matx air cooled build please
I just got it.
@@Renegade_Rabryn cool 😎
my gpu is just dual fan and my aio is 280.
typically lian li quality
Very typical
I love your videos, and I apologize if this is rude, but the whole purpose of a build video is to see all the parts being built 😢 but besides that I love your videos thanks for sharing
This video shows pretty much everything including cable routing. What more did you want to see?
I hear ya....I do enjoy showing the cpu, ram, ssd install I just skipped it in this video. Next video I'll be showing it again.
@syberpunk it's not a bad thing. I just enjoy watching the entire build. I wasn't saying it to offend anyone or make anyone mad, so I apologize
w