Arcade 1up Support: 1-800-764-2760 If you enjoyed this video please consider subbing, liking, and sharing. Thank you. Here are some other videos I've made: Modding an Arcade1Up with a Raspberry Pi: ruclips.net/video/uIfpiIPjgs0/видео.html Arcade1Up 12-in-1 Atari Review: ruclips.net/video/n4u8yD8USyM/видео.html
Buy any of their games at Walmart. Pay the 16 bucks for the two year warranty and keep the box. My game was doa. I called customer service they wanted a picture, then a video. Its faster to take it back and swap it out. You have been warned. I am not going to mention how I had to upgrade my joystick for a better one.
3:00 except that 5 years later, this 200$ cabinet is now 600$ with the same cheap buttons. 3:30 i agree with the wood though 5:35 the "gautnlet" mispell means you have an old version that stops at level 36 in one game
I have Galaga that turns on but when I try to start one of the two games it displays the instructions, I hit player one and it just goes back to the game selection screen. Any ideas?
My pacman machine does the same thing. I have finally taken it apart and all the wires are connected. Ive unplugged and plugged everything back in... nothing has worked.. only toggles between the game selection and player selection screens.
Got my kids the T2 version for Christmas and it's practically brand new. In the middle of playing with my husband yesterday it just started glitching and now won't turn on, it just makes a crackling sound .
I just took apart the monitor out of a golden tee classic and the back is all scratched up, like it was used. Sort of like they were trying to hide serial numbers. I had to break a warranty sticker to see this.
Thanks for sharing a common issues and way to fix it, however there are couple more issue on the old Arcade1up models such as Street Fighter II cabinet has mono only speaker which some SF2 games that have Stereo won't sound "right". For those who lives in Europe, there's also own customer service to contact, if you need a replacement parts for your Arcade1up cabinet. I'm still awaiting for a clear protector panel for my SF2 cabinet.
I got Galaga in test mode A by hold all the buttons then turning it on at the same time. I got it into test mode B by holding all the buttons and joystick left at the same time then turning it on. Both modes require you the have the volume switch in the center before you turn it on, then when it asks to test it go left first then all the way right. My problem is before I did the test modes neither game would load. Now after doing both modes Galaxian loads and plays. I am able to select the games but only one loads now. Does anyone know what to do to correct this problem? *Update* Since I did the tests I got both games to work but most of the time I turn it on they don't work. I found that if I keep turning if off and on each time changing the position of the volume key eventually both games work. Sometimes only Galaxian works. When Galaga works they both work. I know the PCB is bad but not completely or it could have something to do with the volume switch. I don't have either to test to see what one is bad for sure. 1up are complete thieves with their prices and shipping. If anyone can please at least tell me what to do to completely fix it or donate a PCB or controller board to help other people solve this problem without getting hit over the head by 1up please let me know. I know theirs many other people having this problem and if you call them with it they do nothing but tell you to buy a new PCB no matter how nice you are so please help me help everyone because they refuse.
I found my 1up arcade in the trash in the rain. Wire broke inside somehow, can't wait to fix it, however the side walls of it are swelling from water rip
Yes, it's not bad value for the money. But, It would not cost Arcade1up a lot of money to include better quality controls. That was cheaping out. And what makes you think a lit up marque would be so expensive ? A Chinese light socket cost less than $1 and a small piece of plastic for the marque would be less than $2. That's it.
How about blurry screen ? On all games as well . I have mortal combat with defender and 10 other .. I moved . Plugged in everything was fine .. then a month later issues. it’s hardly used .. I now have blurry screen with lines on all games
Iam totally happy with the game but when I turn my game on the main screen works, I can chose between games as usual ( sound is perfect) but when I select a game it simply does not load?? And ideas on why not?
Returned 3 mk systems because the screen was scratched up real bad. Bought the last one #4 try and I got lucky the screen only had a few scratches but guess what player 1 joystick 🕹 doesn’t work
Seeing these for MSRP $300 and going on sale for $150 is a trip in 2021 lol. Just paid $650 for the "new" TMNT cabinet! Side note, I couldn't setup an online account. It kept giving me "error occurred" message after typing in my email. This is the same email I used for NBA Jam online, maybe that's the issue? Might have to call that number, thanks for the vid!
I need a video showing me how to change the screen in a partycade please. i have one that wworks and one that doesn't so i need to combine the 2 to make 1.
@@GregsGameRoom The score save system is just odd in general. I have the Centipede cabinet. On Centipede it will ask for you initials for top 1-8 scores but only save if you get 1st place. Missile Command and the others do not save at all. A simple work around is putting a post it note on the marquee.... but come on
My mom got us a Pac-Man cabinet for Christmas this year, but it wouldn't go up or down, so we returned it and we didn't even open Space Invaders before we returned it too. What went wrong?
Building my turtles and Star Wars now, but I’m realizing I won’t be able to get them out of the room once done due to their control panels (at least turtles for sure). Do you think it would be difficult to remove the control panel and put it back together for the purpose of moving? I’m not sure how complicated it is since I stopped assembling when I got concerned.
My 1up arcade just has a black screen when i turn it on. Its the Mortal Kombat cabinet and i was tild that if i left it on a few days it would work again and that did work fir a month but it went straight to the black screen again. I called 1up but because my mom cant find the digital reciept they wont help me. It was great for about 6 months but its just sat in my corner for a year now after paying $300 plus. It cant be a complicated fix but I haveny found a solution. Can you help?
@@GregsGameRoom Actually man i was just looking to see about lutting my playstation classic in it instead. Any videos on that by chance? I want to pi too but dont have one atm but i have the modded playstation classic sitting right next to it
Yes they told me to turn off solenoids on game setting and to test it so far not cutting try that I will update on tuesday at has nor but cuts but only played two games on it
I got a galaga/galaxian for christmas and just got time to put the thing together and it comes on but the game wont load when selected.plus there is a pixelated section running down the screen whem selecting galaga.
I was interested in buying MK cabinet but with all those brick system if you go to the menu turns me off real quick and now with all thosd comments its 100% official i wont buy this crap.Anyway at 600$ can$ for MK its ridiculous,its bullshit
Maybe you can help me when I start my PAC-MAN game the button works but when I tried to start it after the instruction screen and kicks it back to the menu.... any idea why? Do I just need to replace the PCB? Can it be saved? Please help
Huge Canadian problem... Still NO RISERS available... Been keeping my eyes on Walmart.ca website since October.... Zero Risers available... Wtf Arcade 1up
@@GregsGameRoom I've messaged arcade 1up 3 times now about it with no response. Not sure why, they responded right away about my protector, but no response about the risers to Canada. Maybe Trump won't let them send us "Snow Mexicans" risers! Lol damn you Trump!
Hello I just wanted to say I bought a new 1 UP Pac Man Game machine at Walmart and brought it home only worked 30 minutes now it will not turn screen on just makes little noise when I move it
Someone directed me to your video. I've been having major online gaming problems with my NBA Jam cabinet. Since they did this last update and server maintenance a few weeks ago I've been getting penalties left and right. I've contacted arcade1up and codemystics. No answer. Please Please Please any help would be appreciated.
Hi my name is Patrick I bought the Ms Pac-Man cabinet from QVC got it three days ago the super Pac-Man game on it has a software problem the other games play good I want to know is there anybody out there that has the same problem please let me know
These cabinets are nothing but Boy Toys made by a Toy Company... I purchased one of these for my 6yr old son for his room and that’s where it’s going to stay… I would not embarrass myself by putting this in my mancave... it’s pathetic to see a grown man messing around with these... step your game up and get a Man’s Machine...!!
TboneNYC10 Oh… look who it is… it’s Arcade1up No#1 Fanboy… have you stepped up your game yet..?? or are you still playing with those children’s toys..??
I'll bet you, you don't even have a real machine yourself. Not everyone can afford a real one. There's nothing wrong with the Arcade 1 Ups especially if you mod them with a raspberry pi, but with the way your brain clearly thinks I highly doubt you'd be able to figure it out.
I need help with my galaga! Everything functions, buttons, graphics are great. The problem is selecting either player 1 or player 2 buttons, it does not take you to start the game. It's been cleaned and it simply won't go in to play mode. Help!
Arcade 1up Support: 1-800-764-2760
If you enjoyed this video please consider subbing, liking, and sharing. Thank you. Here are some other videos I've made:
Modding an Arcade1Up with a Raspberry Pi: ruclips.net/video/uIfpiIPjgs0/видео.html
Arcade1Up 12-in-1 Atari Review: ruclips.net/video/n4u8yD8USyM/видео.html
I tried calling there is no one available to physically talk with... Just fill out the form
Yeah, I'm having all sorts of problems assembling mine and all I get is a recording.
I can’t get my to turn on! Any ideas? I triple checked all the plugs and outlets. Turn the switches on and off nothing is happening.
@@matthewvang71 did u fix it? If so how?
@@DarkReturns1 no I couldn't fix it, so I returned it to Costco and got a new one. Sorry I couldn't be of help.
Buy any of their games at Walmart. Pay the 16 bucks for the two year warranty and keep the box. My game was doa. I called customer service they wanted a picture, then a video. Its faster to take it back and swap it out. You have been warned. I am not going to mention how I had to upgrade my joystick for a better one.
3:00 except that 5 years later, this 200$ cabinet is now 600$ with the same cheap buttons.
3:30 i agree with the wood though
5:35 the "gautnlet" mispell means you have an old version that stops at level 36 in one game
I have Galaga that turns on but when I try to start one of the two games it displays the instructions, I hit player one and it just goes back to the game selection screen. Any ideas?
Loose wire maybe? Dunno.
Mine does this too and I cant figure out how to fix it either.
My pacman machine does the same thing. I have finally taken it apart and all the wires are connected. Ive unplugged and plugged everything back in... nothing has worked.. only toggles between the game selection and player selection screens.
My Centipede is doing that now if anyone found a solution 🙏🏼
Im having the same issue
Got my kids the T2 version for Christmas and it's practically brand new.
In the middle of playing with my husband yesterday it just started glitching and now won't turn on, it just makes a crackling sound .
I just took apart the monitor out of a golden tee classic and the back is all scratched up, like it was used. Sort of like they were trying to hide serial numbers. I had to break a warranty sticker to see this.
I want an Arcade1Up room...probably should get a house first! Lol.
That would help...
If I am paying 300 I want the system to look good and work. Lol
This is true!
Thanks for sharing a common issues and way to fix it, however there are couple more issue on the old Arcade1up models such as Street Fighter II cabinet has mono only speaker which some SF2 games that have Stereo won't sound "right".
For those who lives in Europe, there's also own customer service to contact, if you need a replacement parts for your Arcade1up cabinet. I'm still awaiting for a clear protector panel for my SF2 cabinet.
I think there are specific country support lines on the website. Good point about the stereo. How did they let that one slip past?
I got Galaga in test mode A by hold all the buttons then turning it on at the same time. I got it into test mode B by holding all the buttons and joystick left at the same time then turning it on. Both modes require you the have the volume switch in the center before you turn it on, then when it asks to test it go left first then all the way right. My problem is before I did the test modes neither game would load. Now after doing both modes Galaxian loads and plays. I am able to select the games but only one loads now. Does anyone know what to do to correct this problem?
*Update* Since I did the tests I got both games to work but most of the time I turn it on they don't work. I found that if I keep turning if off and on each time changing the position of the volume key eventually both games work. Sometimes only Galaxian works. When Galaga works they both work. I know the PCB is bad but not completely or it could have something to do with the volume switch. I don't have either to test to see what one is bad for sure. 1up are complete thieves with their prices and shipping. If anyone can please at least tell me what to do to completely fix it or donate a PCB or controller board to help other people solve this problem without getting hit over the head by 1up please let me know. I know theirs many other people having this problem and if you call them with it they do nothing but tell you to buy a new PCB no matter how nice you are so please help me help everyone because they refuse.
Buy from Walmart, 16 bucks for a 2 year warranty, fk customer support just take it back simple as that.
I found my 1up arcade in the trash in the rain. Wire broke inside somehow, can't wait to fix it, however the side walls of it are swelling from water rip
Great advice. By the way, was that Rich Hall, in the IT clip segment? LOL
What are the best emulators for fighting games? Street fighter, Darkstalkers, etc?
A great video that addresses not only the possible concerns for future buyers, but also the quick remedies as well! Excellent my friend!
Thanks man, appreciate it!
Do you know why my game would be starting up and going to the loading screen but then it just goes blank? Plz help
Yes, it's not bad value for the money. But, It would not cost Arcade1up a lot of money to include better quality controls. That was cheaping out. And what makes you think a lit up marque would be so expensive ? A Chinese light socket cost less than $1 and a small piece of plastic for the marque would be less than $2. That's it.
How about blurry screen ? On all games as well . I have mortal combat with defender and 10 other .. I moved . Plugged in everything was fine .. then a month later issues. it’s hardly used .. I now have blurry screen with lines on all games
Iam totally happy with the game but when I turn my game on the main screen works, I can chose between games as usual ( sound is perfect) but when I select a game it simply does not load?? And ideas on why not?
I want to switch my control panel to one with more buttons how do I move the speakers
6 pm on 7/11/2023
We replaced the PCBA board, now we have flashing screens: red, blue, white, and white. How do we fix it? We have Ms PacMan legacy. 😊
Returned 3 mk systems because the screen was scratched up real bad. Bought the last one #4 try and I got lucky the screen only had a few scratches but guess what player 1 joystick 🕹 doesn’t work
Same problem got new joystick and now it won't start up now
@@jeffy4540 did yours ever work?
@@Amozu it did at first.
@@jeffy4540 wow
I bought mine and it only worked the first day
The second day I tried it and it would not work
I’m beyond pissed
@@Amozu I think mine is the wiring on it. I had to to hit the side to get screen to come on.
Great channel! New subscriber. Do you know how to adjust the difficulty level for Street Fighter 2? I only see vids for MK2. Thanks!
Thanks. You talking about the A1up board? Not sure you can change the difficulty on that one.
Seeing these for MSRP $300 and going on sale for $150 is a trip in 2021 lol. Just paid $650 for the "new" TMNT cabinet!
Side note, I couldn't setup an online account. It kept giving me "error occurred" message after typing in my email.
This is the same email I used for NBA Jam online, maybe that's the issue? Might have to call that number, thanks for the vid!
Sorry dude. When product is so bad it makes local news TV .
The company has a problem.
I need a video showing me how to change the screen in a partycade please. i have one that wworks and one that doesn't so i need to combine the 2 to make 1.
I cant get ahold of anyone when I call. Tells me to go online. Their online service is awful.
Same
my first wave on tmnt turns on for a while then turns off my kid says there is a short some were i don't no what to buy to fix
So when I turn my unit on it says loading... but goes no further lol wtf
My only gripe is the score not saving on all games. Can't believe they let that slide on arcade titles.
Yeah exactly. Although I think they'd have to modify the emulator? Not sure what is involved, I know some arcade games didn't save high scores.
@@GregsGameRoom
The score save system is just odd in general. I have the Centipede cabinet. On Centipede it will ask for you initials for top 1-8 scores but only save if you get 1st place. Missile Command and the others do not save at all. A simple work around is putting a post it note on the marquee.... but come on
There new cabinets save high scores
Mine will save the high scores, but only until I turn the machine off. Then it resets to old high scores. It's really disappointing.
My mom got us a Pac-Man cabinet for Christmas this year, but it wouldn't go up or down, so we returned it and we didn't even open Space Invaders before we returned it too. What went wrong?
Lack of quality control
@@GregsGameRoom So...it was broken because...it was just broken?
Building my turtles and Star Wars now, but I’m realizing I won’t be able to get them out of the room once done due to their control panels (at least turtles for sure). Do you think it would be difficult to remove the control panel and put it back together for the purpose of moving? I’m not sure how complicated it is since I stopped assembling when I got concerned.
I don't have a TMNT, but if it's anything like the 12-in-1, it's pretty easy to remove the control deck.
How did you get Kangaroo on your Arcade1up?
My 1up arcade just has a black screen when i turn it on. Its the Mortal Kombat cabinet and i was tild that if i left it on a few days it would work again and that did work fir a month but it went straight to the black screen again. I called 1up but because my mom cant find the digital reciept they wont help me. It was great for about 6 months but its just sat in my corner for a year now after paying $300 plus. It cant be a complicated fix but I haveny found a solution. Can you help?
Put a Raspberry Pi in it. I have videos that show how
@@GregsGameRoom Actually man i was just looking to see about lutting my playstation classic in it instead. Any videos on that by chance? I want to pi too but dont have one atm but i have the modded playstation classic sitting right next to it
@@GregsGameRoom And thanks for the quick response man. I appreciate ya.
Also make sure all your cables are connected securely
I just got Pac-Man and I can’t get player 2 to work screen does not flip you know how to fix this ?
Nice video as always Greg!
Thank you!
I have aracade one up marval pinball and its cuts off is there anything I can do about it works fine but after about 4 to 5 minutes it cuts off
Did you find solution? I’m hear for same reason
Yes they told me to turn off solenoids on game setting and to test it so far not cutting try that I will update on tuesday at has nor but cuts but only played two games on it
I got a galaga/galaxian for christmas and just got time to put the thing together and it comes on but the game wont load when selected.plus there is a pixelated section running down the screen whem selecting galaga.
I was interested in buying MK cabinet but with all those brick system if you go to the menu turns me off real quick and now with all thosd comments its 100% official i wont buy this crap.Anyway at 600$ can$ for MK its ridiculous,its bullshit
Great information. But how do you get them to sell you the encoder pcb?
I just bought the mk2 machine amd the screen wont power on and i cant get ahold of anyone and i dont know what to do
Maybe you can help me when I start my PAC-MAN game the button works but when I tried to start it after the instruction screen and kicks it back to the menu.... any idea why? Do I just need to replace the PCB? Can it be saved? Please help
Huge Canadian problem... Still NO RISERS available... Been keeping my eyes on Walmart.ca website since October.... Zero Risers available... Wtf Arcade 1up
That's crazy. I originally was going to discuss availability, but didn't know what to say exactly. So that covers it well.
@@GregsGameRoom I've messaged arcade 1up 3 times now about it with no response. Not sure why, they responded right away about my protector, but no response about the risers to Canada. Maybe Trump won't let them send us "Snow Mexicans" risers! Lol damn you Trump!
i got mine on a end table!
Can anybody give me a tip on how to fix the control pad because I cannot jump with player 2 on the Mortal Kombat 1up machine
Sounds like you have a bad joystick.
Take the panel off and check the connections on the joystick and buttons.
Hello I just wanted to say I bought a new 1 UP Pac Man Game machine at Walmart and brought it home only worked 30 minutes now it will not turn screen on just makes little noise when I move it
Also my grandson lost the reciept right when we got home so I believe we are out of it money and game
my mortal Kombat machine lcd doesn’t display anymore. Only the audio works. Any help?
mine doesnt even load up the game select screen. it turns on but thats it
It took me a month to get a new PCB, and the deck protector.
It took me two months to get my Rampage replacement board.
My pacman arcade 1up won’t pass thw start up screen. How to fix? Turns on, shows where it says press start “player 1” then wont pass that
I have the same problem now with my space invaders 40th anniversary. How did you fix yours?? Thanks
Someone directed me to your video. I've been having major online gaming problems with my NBA Jam cabinet. Since they did this last update and server maintenance a few weeks ago I've been getting penalties left and right. I've contacted arcade1up and codemystics. No answer. Please Please Please any help would be appreciated.
Hola a mi se me daño el board saben como podría obtener uno gracias
Hi my name is Patrick I bought the Ms Pac-Man cabinet from QVC got it three days ago the super Pac-Man game on it has a software problem the other games play good I want to know is there anybody out there that has the same problem please let me know
What's a ram mod error?
My new TMNT has sound but nothing on screen.. 😭
Same here. They sent me a pcba after 2 weeks and it didnt fix my issue. Terrible service . Mine needs a lcd screen
sounds like Raspberry PI is the BEST way to go
It definitely gives you a ton more games. I have some videos about how to create and install one.
@@GregsGameRoom - i have a DIY dash board control for my MAME games which i will eventually move to a cocktail table for either MAME or Raspberry PI
No power at all No power
Ours died after two hours , atari 1 up will not contact us . Do not buy this product
These cabinets are nothing but Boy Toys made by a Toy Company... I purchased one of these for my 6yr old son for his room and that’s where it’s going to stay… I would not embarrass myself by putting this in my mancave... it’s pathetic to see a grown man messing around with these... step your game up and get a Man’s Machine...!!
To tell you the truth, the way you think is pretty pathetic.
Everyone has different tastes. That's what makes us great!
TboneNYC10 Oh… look who it is… it’s Arcade1up No#1 Fanboy… have you stepped up your game yet..?? or are you still playing with those children’s toys..??
I'll bet you, you don't even have a real machine yourself. Not everyone can afford a real one. There's nothing wrong with the Arcade 1 Ups especially if you mod them with a raspberry pi, but with the way your brain clearly thinks I highly doubt you'd be able to figure it out.
this is the type of guy who has settled for everything his whole life.
I need help with my galaga! Everything functions, buttons, graphics are great. The problem is selecting either player 1 or player 2 buttons, it does not take you to start the game. It's been cleaned and it simply won't go in to play mode. Help!