0:47 how can you make a metal smithing guide and say that “silver has the highest melting point” among the 3 metals? Everybody knows that copper is the highest as it melts at 1085°C whilst silver 962°C.
AFTER WATCHING NUMEROUS VIDEOS ON RUclips, I HAVE COME TO CONCLUSION THAT EACH JEWELLER HAS HIS OWN MIX, BE HARD, MEDIUM OR SOFT. IT'S LIKE MAKING TEA, WHERE ONE CAN MAKE IT TO THEIR OWN TASTE.
It'll take a little bit more work but you'll have complete absorption of zinc. Alloy the copper and silver then roll out into a thin equidistant square then anneal and wrap the zinc with it and melt with plenty flux.
I guess im asking the wrong place but does someone know of a method to log back into an instagram account? I was dumb forgot the login password. I love any tips you can offer me!
@Ashton Alfonso thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
I have a question🙋 Let's say I'm using this for sterling silver soldering, in that case I'm sure it is not going to give us the 925 sterling silver quality. What to do in that case?
can you pls tell me how to make 30% purity silver solder in whick quantity zink and copper should be mix with silver for overall 30% purity pls tell me
Would be a waste of money Doing so the chemicals you need are deadly without very good ventilation you can die from the fumes. There is only a few dollars worth of silver in there better to sell it as spot silver if you don’t plan on using it
This is really helpful. I just have one question though: when rolling this on a mill, do you also anneal the solder? I have followed what you did here but I'm having issues flattening this so I can cut to Pallion. Thanks in advance
Yes. Reduce by 1/3 to 1/2 thickness or until it gets difficult to roll. Then anneal and repeat until it’s thin enough. A sharp chisel on a scrap piece of steel works well for chopping it up, it’ll dull nippers a lot faster than most things (that a jeweler uses them for)
0:47 how can you make a metal smithing guide and say that “silver has the highest melting point” among the 3 metals? Everybody knows that copper is the highest as it melts at 1085°C whilst silver 962°C.
AFTER WATCHING NUMEROUS VIDEOS ON RUclips, I HAVE COME TO CONCLUSION THAT EACH JEWELLER HAS HIS OWN MIX, BE HARD, MEDIUM OR SOFT.
IT'S LIKE MAKING TEA, WHERE ONE CAN MAKE IT TO THEIR OWN TASTE.
It'll take a little bit more work but you'll have complete absorption of zinc.
Alloy the copper and silver then roll out into a thin equidistant square then anneal and wrap the zinc with it and melt with plenty flux.
I guess im asking the wrong place but does someone know of a method to log back into an instagram account?
I was dumb forgot the login password. I love any tips you can offer me!
@Bradley Case Instablaster =)
@Ashton Alfonso thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Ashton Alfonso It did the trick and I finally got access to my account again. I'm so happy:D
Thanks so much you really help me out !
@Bradley Case no problem :)
hey thanks for the great explanation! can you please write me down the name of the acid you are using to purify the mixture ?
Please show gold solder.
Can this be mixed with carat gold to make gold solder? for example 60% 14k gold and 40% of this solder mixed together
Can we make a solder with just silver and zinc? (Without copper)
Results? And composition please 🙏
Hi ,
I like your ingot , where I buy it ? Thanks!
Wow, cool ingot mold! You should do a video on making those 😁
I about to say same thing
What about 10% Cadmium for low melting point work.
I have a question🙋
Let's say I'm using this for sterling silver soldering, in that case I'm sure it is not going to give us the 925 sterling silver quality. What to do in that case?
motiya kandore jaalne ke liye kdm kaa taka kese bnate he
can you pls tell me how to make 30% purity silver solder
in whick quantity zink and copper should be mix with silver for overall 30% purity pls tell me
Thank you for helping in my country Iraq we use kademium but this metals not good for health 🎉
have you got any video for a formula to make downgrade 999 fine silver to 925 ? thanks a lot keep up the good work stay healthy
Is this ratio a meat for silver?
Hello dear red brass??
Pliz how to make gold 12 k ?
I have ten grams of silver, how do I make silver welds, and how much copper and cadmium are there
what if i only have silver, copper and brass - what are my ratios now?
@David Chatterton Hello brother, can silver and copper be added to cadmium?
Finaly solder purity is what %?
Its written ...65 % 😂😂😂
Wats d ratio for making 22kt gold solder?
Is there an easy way to separate the zinc from the silver if you wanted to purify the silver once again?
Would be a waste of money Doing so the chemicals you need are deadly without very good ventilation you can die from the fumes. There is only a few dollars worth of silver in there better to sell it as spot silver if you don’t plan on using it
Yes, a cupel. It doesn't require chemicals. It's a material that will absorb the base metals. Watch a video on youtube about it.
what will we add in silver for making it 70% purity
Get some zinc on amazon they sell very high quality 99.99 pure anodes that are already flattend out
*Hlo can we use k.d.m instead of zinc?*
Yess in alot of people in india and pakistan use kdm instead of zinc
Where cadmium is found?
This is really helpful. I just have one question though: when rolling this on a mill, do you also anneal the solder? I have followed what you did here but I'm having issues flattening this so I can cut to Pallion. Thanks in advance
Yes. Reduce by 1/3 to 1/2 thickness or until it gets difficult to roll. Then anneal and repeat until it’s thin enough. A sharp chisel on a scrap piece of steel works well for chopping it up, it’ll dull nippers a lot faster than most things (that a jeweler uses them for)
How light and fast silver welding is
Can the zinc in the battery be used?
It's cheap enough to buy in sheets or ingots. Don't endanger yourself over a few bucks. If you can afford silver, you can afford zinc.
I get it from Pennies in the US.
Great Vid!! Did you say Bob is your uncle? I have never heard that before! Hahaha!
Sar 14 carat Mein joining gold karne ka milati method
Thank you sir❤
Mujhe silver solder machine kaise karen Kaise le iske liye koi idea do na ka video dikhayen Banakar
sir gold solder making btao pls
Sir gold solder making btao
Ciao quanto vale questi grani silver
سيدي النحاس أصفر أو أحمر
وشكرا" جزيلا" لك
اصفر
من اين يمكنني الخصول على الزنك
@@hichamtimizar9242
صديقي 2 غرام من الفضه مع فرام واحد من النحاس الاصفر (براص) وبس هذا اسهل لحام عن تجربه 👌👍
@@احمدسلامعبيدالجميلي شكرا جزيلا
@@احمدسلامعبيدالجميلي هل هذه الطريقه تعطينا لحام سريع اقصد الطريقه بالفيديو
Copper has a higher melting point than silver! Almost 200 degrees Fahrenheit higher
Ciao questa lega e metallo prezioso giusto
bravo
Good
Thank you! :)
hi
😘😘😘🙏🙏🙏⚘⚘⚘❤❤
I can't understand a thing you're saying brother you're whispering
if it has no Hallmark good luck Selling it
You can buy those anywhere, a sterling stamp is $5 from India never trust hallmarks unless on dated stuff. People forge gold Panda coins,