How to Manual Reset Canon G3010 Printer and fix 5B00 or P07 Error.
HTML-код
- Опубликовано: 17 окт 2024
- Full tutorial on how to Manually reset the Canon G3010 Printer.
Learn how you can manually reset your Canon G3010 or any Canon G-Series Model without using any canon service tool or software.
This can be also applied other Canon G-Series Model Printers like Canon G2010, G4210, G4410, G4412, G1010, G3010 Printer.
Follow these simple steps:
1. Set the printer to Service Mode
Press and Hold the Power button then press Stop button 6 times.
Wait for the Green light become steady.
2. Press the Stop button 3 times and the power button once
to check the current waste ink counter value.
3. To reset the waste ink counter value.
Press stop button 5 times and power button once.
4. Once successful the printer will print EEPROM Data
5. Once Done Printing, Turn off the printer.
Please subscribe to our RUclips channel to help us grow and get more tutorial updates.
Thank You!
Follow us:
Facebook Page: / tech-aid-tv-1038816055...
FB Group: / 293191639399719
#Techaidtv
#Freetechtutorial
#Canonprinter
#CanonG3010
#SuppporCode5B00
#printertechtutorials
#canonmanualreset
This is the only guide where the service mode entry was given correctly 💯 worked perfectly.
million thanks for this guide! better than most of the tutorial out there!
You're Welcome
It's our pleasure to help
We are grateful for your support
hello can u please make a video for P10? this is currently the display error that i have. my printer can print (after i turned it off and on again) about half a page and then would suddenly stopped printing, followed by the P10. i can connect wirelessly and scan stuff too. so aside from this printing problem, everything works. the ink are also not depleted so idk what to do.
you deserve a subscription.
Thank you
It's our pleasure to help
We are grateful for your support
Wow!!! It really works.. Thanks to you.. God bless u always
You're Welcome
It's our pleasure to help
We are grateful for your support
IT WORKS! NO NEED to waste money on repairs.
ARIGAPUT GOZAIMASU! 😃
Thank you so much for the helpful tips, so easy to follow❤
You're Welcome
It's our pleasure to help
We are grateful for your support.
Very good, many thanks.
You're Welcome
THANK YOU SO MUCH SIR IT IS VERY USE FULL FOR ME. MY PROBLEM RESLOVED
You're Welcome
It's our pleasure to help
We are grateful for your support
Super, it works. Solved my problem easey. Thaks a lot
You're Welcome
It's our pleasure to help
We are grateful for your support
EEPROM data can be printed once only?
No Just repeat the process then you get the EEPROM data again
thanks much for the help. super helpful.
You're Welcome
It's our pleasure to help
We are grateful for your support
THANK YOU SO MUCH SOLVED MY PROBLEM
You're Welcome
It's our pleasure to help
We are grateful for your support
Terima kasih atas kontennya yang sudah membantu.
but the time to cheak d ink level print shows blank with faded starting
Try to print head cleaning
It works, Alhamdulillah, shukran..
You're Welcome
It's our pleasure to help
We are grateful for your support
THX DUDE IT WORKED
You're Welcome
It's our pleasure to help
We are grateful for your support
mine is not showing 0 waste ink sheet, what to do ?
Good morning sir
Followed the same procedure ,but the printer not turned into service mode still orange light is blinking P07 error
Try for the second time
Same
Красавчик ❤❤❤🤝🤙🫡👍
THANKS, IT REALY WORKED
You're Welcome
It's our pleasure to help
We are grateful for your support
Thank you, that helps me
You're Welcome
It's our pleasure to help
We are grateful for your support
Thanks a lot, this solved my problem
You're Welcome
It's our pleasure to help
We are grateful for your support ♥️
Not working on my Canon G3010 with same error code.
Turn off the Printer and do it again
謝謝~幫了大忙
Thank you somuch, it did help
You're Welcome
It's our pleasure to help
We are grateful for your support
This method is not working for me.. wat to do..😢
Ano Po Ang ibig sabihin ng D=000.0 wla na Po bang ink?
Ink Absorber Counter po yan sir
Hello my printed didn’t work but the code is P2
Try to move the printhead to left side and clean stain on encoder strip
helpful lods
You're Welcome
It's our pleasure to help
We are grateful for your support
Mine is not working after press Stop 6 times. Tried it twice
Turn off your printer and try again
@@Tech-aidSupport29 did it few times. Still the same
Thanks😊
You're Welcome
It's our pleasure to help
We are grateful for your support.
what if i never replace pads and keep doing ur method
Yes It works even without replacing pads
@@Tech-aidSupport29 work for g6070?
Bakit sakin sir kahit nasa service mode na nagbiblink padin yung orange
Hintayin nyo lang po hanggang ang stable
Hwy while printing its showing Orange light again
What is the error code??
Merci
You're Welcome
It's our pleasure to help.
We are grateful for your support.
My printer doesn't make on
Try to replace power supply
my printer did not work, I try 10times.
It might be a board problem
Thanks sir
You're Welcome
It's our pleasure to help.
We are grateful for your support.