Clinc Clinc is the agle gear connector problem, it goes "freely" inside (the teeth)you need to change a connector or refubish the angle gear teeth.and ,also, when you repairing the gear, you need to adjust the "pair" (hypoid).otherwise your angle gear will be out of order soon.
Hello, thank you. 2008 XC90 AWD 3.2. When I turn the rear drive shaft there is several degrees of play coming from the Angle Gear. Vertical and Horizontal movement is none (near the rear shaft opening) indicating the carrier bearings are ok. My problem must be in the pinion gears themselves or the bevel gear splines correct?? Both front CV axles have been replaced. Note: when trans gears down (3rd to 2nd and 2nd to 1st) there is a clunk sound-also present switching from drive to reverse and back. I can also rock the vehicle back and forth slightly when parked and engine off. Any advice you can give me?
Is this the collar sleeve on the angle gear?I have a vibration on a v70xc awd and ringing sound from the propeler shaft centar bearing and the rubber that holds the bearing,so I'm wondering ifthe ringing sound may come from this part that you showed in the video?
i wish i could understand them ... this is exactly what I'm looking for
Rusty Baban please contact me, i will help you to repair.
Clinc Clinc is the agle gear connector problem, it goes "freely" inside (the teeth)you need to change a connector or refubish the angle gear teeth.and ,also, when you repairing the gear, you need to adjust the "pair" (hypoid).otherwise your angle gear will be out of order soon.
I know I'm pretty off topic but does anyone know of a good site to watch new series online ?
@Jamal Carlos Flixportal :D
@Zayden Gianni Thanks, I went there and it seems like they got a lot of movies there =) I really appreciate it!!
@Jamal Carlos no problem xD
Hello, thank you. 2008 XC90 AWD 3.2. When I turn the rear drive shaft there is several degrees of play coming from the Angle Gear. Vertical and Horizontal movement is none (near the rear shaft opening) indicating the carrier bearings are ok. My problem must be in the pinion gears themselves or the bevel gear splines correct?? Both front CV axles have been replaced. Note: when trans gears down (3rd to 2nd and 2nd to 1st) there is a clunk sound-also present switching from drive to reverse and back. I can also rock the vehicle back and forth slightly when parked and engine off. Any advice you can give me?
Several degrees is ok, if there is no any sounds.
Is this the collar sleeve on the angle gear?I have a vibration on a v70xc awd and ringing sound from the propeler shaft centar bearing and the rubber that holds the bearing,so I'm wondering ifthe ringing sound may come from this part that you showed in the video?
no
Kaip išspręndėt šitą problemą?
Sveiki, kokia kaina uz movos keitima xc70 136kw 2006 metu ?
80
@@FinoFiesta gal kartais veiksmas vyksta kaune ?
@@MrPyncas sostine
@@FinoFiesta kiek sansu jog tik mova nusisukus o reduktoriau ir dezes slicai geri ? ar geriau iskart ieskoti restauruoto reduktoriaus ?
Marius Petrauskas 33 procentai
No English, DaM it