How to replace a door lock cylinder on a Ford F150 / F250/ F350. Step by step tutorial. Episode 49
HTML-код
- Опубликовано: 5 сен 2024
- This video will show you how to remove and install a door lock in your Ford F-250 / 350. This is a step by step tutorial. Please subscribe and like.
Sir, this is the best video on replacing the door lock...after watching about 18 videos that are talking about something else, home problems, speeding video up etc. Excellent presentation.
Awesome video! This is the best instructional video to replace the individual lock without taking the whole mechanism apart. Well done! Thank you!
FINALLY SHOWS THE ACTUAL REMOVAL OF THE LOCK CYLINDER FROM THE ORANGE CLIP!!! Man, thanks, got so tired of watching these repair videos where the dude just talks about his gf or whatever or fast forwards the repair.
Glad I could help you out. Thank you for the positive feedback. I appreciate it.
My driver's side f150 lock has gotten real finicky lately. this is exactly the kind of helpful content I was looking for. Thanks a bunch!
Your welcome. Glad I could help.
@@alley55customs93yeah, thanks....I plan on keeping my 20+ year old car for asong as possible
Wished you showed exactly how you took the 2 11mm nut out
The hardest part you didn't show! Getting the 11mm bolts back on to the lock assembly. Otherwise...very good
He skipped showing the plate fastened to the handle with T15 also, he doesn't show that or mention it at all. But you can see them on replacment handle assembly sold on ebay, they show a phillips screw but I always run into T15.
Helpful video, Thanks. It sure would have helped to show how you handled not losing the nuts on the inside of the door though. I appreciate the video.
Yeah losing the nuts/bolts I've actually put a piece of chewed soft Bubblegum to hold the nut or bolt in place in the socket and that worked.
Had someone take, what I’m guessing is, a screwdriver to my drivers side lock in the mall parking lot last night. I’m thinking this is all I need. Wish I could drop a picture here for someone to look at. Thanks for the help!
was it an older ford F series?
@@rmsg7504 2003 F250
@@jcobra09 Should be the same as this video then. If you have roll up windows instead of power that's the only little difference. Just remove the roll handles with a screwdriver, they have a hidden cover. the arm rest pries up pretty much the same. If you have hand tools, its not the worst job to do. I would use a telescoping magnet when you loosen the screws they fall in pretty easy. Also, there is a bar that is located on the handle inside the door they don't show in this video. You can see it its held on with two screws if you go to ebay and find picture of it handle for sale. Basically either don't remove that bar if you can do the work with it attached, if you remove the bar leave it off or be prepared to fiddle with it for a long time. Not terrible but its a little tricky re-attaching that bar. I've done two of these replacement door and igniton jobs, one took me an hour piece of cake the other was a PITA took me like 2.5 hours.
Would have been nice to actually see how you pulled those two 11mm bolts that hold the handle on. That's the part that is tough and it wasn't shown.
Ok Thanks very much my friend Excellent job
Thanks for this both of my locks got punched by a car thief.
Glad I could help. Thank you for the positive review.
I live in Portland Oregon and I have had my poor f250 2006 6.0 broken into twice and then stole the third time from snapping the passenger door handle to get in and then my ignition being hammered through with a standard screw driver lol Got my truck back and I am purchasing new ignition and a new door lock with new handles. You can literally turn my truck on with your hand at this point. Got a bright yellow security club bar for steering wheel that’s very visible to anyone who looks at my truck. I’m sorry your truck got broken into. I no longer leave anything in my truck and always lock the Club on the steering wheel preventing anyone from steeling it. The security Club bar has been used for years but it definitely prevents thieves from even trying to steel one’s vehicle. If people stopped steeling that would solve everything lol
I can’t find a step by step guide ANYWHERE on the internet to replace my punched out door locks on my 2009 e350 e series econoline. Plz help!
Where did you get a cylinder that works with the ignition key?
These have defective design and can be knocked thru to turn latch with any key or flathead screwdriver. There is an aftermarket fix for this, it's like a steel plate that blocks the defective part from breaking. The small retainer ring is weak and they break it with a flathead screwdriver and hammer.
Hi, after a year I'm watching this video, because the door lock cylinder broke down, my question is, the spare comes with a new key or you can use the one I have, thanks
Is there by any chance a way to key a new door lock to the same key as the ignition like they were from the factory? I have a damaged door lock.
GREAT video !!!!🎉
Excellent tutorial. Thank you very much. 😊
Thank you for the positive feedback. I’m glad I could help you out.
I'm so glad I found this video!! I bought a 2000 F250 V10 for a spare & someone damage the locks on both sides & can'teven get a key in!! So wanting to change them out..can you suggest where I can order the lock mechanisms?
Rock auto
Where do you buy those door locks?
How do you get the key to match the tumbler you installed ? Thanks
I’m wondering same thing
You can buy them as a set. Ignition cylinder and door locks
Where can you get the retainer clip from
You made it look easy. Thank you
Thank you for the positive review. I appreciate it. Let me know if I can help you out.
Just what i was looking for, thanks
Very good description. Good Job!
Whats the prt number having trouble finding the cylinder part built already
Great video! Needed this info for trying to diagnose why my 01 F350 pass door won't open or lock/unlock from outside manual lock mechanisms..got a video for that sir?? I feel the linkage worked it was off the back of the lock..may be ez fix, and on the outside door handle, a cable or linkage rod is broken or unattached.
Hi there!!!! My door lock cylinder came in 5 parts with no instructions how to put it together!!! On your video I see it in one piece. Did your come like that or did you put it together yourself???
It was assembled that way. It came as one piece. I’ve never seen it come in 5 individual parts. You should be able to send it back and order a fully assembled door cylinder.
@@alley55customs93 lol….I did that today!!!🤦🏽♂️
@@alley55customs93where did yiu buy it in one piece? At ford it comes in 5 pieces and it must of came with a key right cause you cant use the ignition key on it
Wold this part work for a 2003 F150
What about the mechanism for the bed? Similar deal?
Thank you for sharing.
Nice show
Thank you sir.
What about changing tailgate locks?
That's what I was wondering too
Good job
Thank you
gracias 👉👍
De nada.
Are you in New Jersey? Need to replace mine.
Would help to know what year?
I have ford e250 abd my driver side lock isn't working properly I was thinking of switching thr driver side door with the back door lock, will that work?
It should if its the same assembly as shown, the locks are ambidextrous
You might have to switch the cam around, but maybe not might be easy
Maybe just order a un-coded un-keyed door lock, have a locksmith key it to match and replace bad lock. The truck thief will probably attack your one working lock after you swap it. Murphys law
Where did you order the lock cylinder from?
any parts seller or online
the arms bend the opposite way on those new locks
They shouldn’t. What year truck do you have? I’ve used the’s on a 1999, 2000 and a 2003. They worked amazing.
👍
This don’t show how the clip goes
The one fifty is not similar to the two fifty my man