I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
Excellent. Followed the instructions as written, and flashed two of them without any issue. Thanks for the video. Got some hope for theses radios now. 73, KN4VA
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
The instructions say to click on start and THEN turn on the radio. I had your same issues but when I reversed the order and clicked on start first AND THEN turned on the radio, it updated firmware. It worked on two older radios.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Patience of a saint! I had that problem on the original radio before they went on sale; I could never get the cable seated so I just gave up. I asked TID to fix the material at the connector--I guess they did not want the expense of modifying the mold. Welp, I ordered the Abreeeeeee cable, that was a plus!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. You will love that cable...
Yeah, apparently they were some with "faulty HW". I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
@360plussynthetics: The TD-H3 can be booted to GMRS, HAM, or Normal, modes. Thus, with the TD-H3 you have numerous options. Important, be aware when you boot the radio from one of those modes to another mode the rebooting process does a factory reset of all three. The radio frequencies and programing you input are gone. Using either Tidradio, Chirp or Odmaster, make sure you have created a backup; then it will be an uncomplicated process recovering your programing for each mode. With Odmaster, you can save it to your phone, iOS or Android, then restore it as needed; too-cool!
Yep this was the easiest firmware upgrade! I saw this video first, then went to another silent video, did exactly the same thing as that video and nothing happened, sooo i went to download the corresponding drivers for my system, clicked on the NEW BIN file Hit start THEN turned on my radio and VOILA!!!! Download Complete Version GMRS_230923!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
You did good work documenting the worst nightmare of firmware updates ape! I'm glad it wasn't one of your high dollar radios that would've REALLY hurt. Sounds like tidradio has some things to work out before you knock any more of your HT army out of commission!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
Using a cable with the FTDI USB/Serial chip, had a successful upgrade on a TH-H3 (not the H8 - don't have one of those). I've seen the same 'plug fit' issue on some of the less popular Baofengs, had to do the same surgery, but was successful in completing the upgrade
Your redirected to the same page after clicking on the video because the link in that html Website code is broken which is why its showing gray with a circle and triangle they didnt build the website right 4:40
I am having the same issue with the whining noise when I transmit. THe only work around I've found was that it doesn't do it with the tx power set on medium or low. I reached out to tidradio but haven't heard from them yet.
Ape please update the video. RandallRash is correct on step 6. I have updated my firmware by following the steps. My radio is on 230823. I am wondering what 230830 has?
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I don't think I am doing anymore videos on this radio...
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I told tid that they should accept returns on these radios and get people sorted properly. They didn't seem to want to do anything other than amazon returns - which AFAIK 'hurts their reputation' on amazon and those radios just get land-filled. Now I want to know how to get my hands on that pallet of returns. 🤔 @@TheSmokinApe
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Off topic but... What are the differences between the ham and gmrs radios? Obviously the power levels. But because it appears that the GMRS radio can be modified to be a HAM or ALL it makes me wonder what the total differences really are. I am a Ham, but I bought two GMRS radios for my family. I will keep one and use it in the ALL configuration. I don't care about the 10w power as it is at best 3db but with a lot less battery life. Perhaps it is only the FCC approval??? Inquiring minds want to know. Tnx 73
Hey DG, they are a little higher than the Ham 70cm band, ham covers many different bands and gmrs is limited to one. Also there are different license requirements for both 👍
Once you open the program and before you press start, hold the PTT button and turn the radio on. Press Start and then release the PTT button it will download the software
Hi, me again. Regardless of your words I bought one of these just to try 4/2024. Buzzing has gone, got it from Aliex to the uk, does get warm after about 20 minutes of use but the issue I’ve found, we use 12.5 the radio only does 12.0 the only workaround I can find is to set at 6.25 is this another issue or is it set for a different country. Regards, love the vids
Bandwidth is likely a regional setting but I’m not familiar with what y’all use over there. That said I’m sure these are GMRS radios that have been tweaked for ham frequencies and I’m pretty sure GMRS is 20KHz
Everything looks the same style of programming as on my Quansheng K6. To upload the firmware on my Quansheng to start the firmware update you turn on the radio holding down the push to talk button. The light should turn on which means it is in Firmware update mode. I don't think it is your cables. My Quansheng has an almost identical firmware update process. Software looks similar with the same fields.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
I did update mine yesterday using a UV5R cable , and I felt the click when I really pushed it in. I also used the same cable later to delete the GMRS channels that my Ham version came with and then uploaded Ham freq's using Chirp, as I could not get ODMaster to work. The update firmware I have is Ham 230911. Hope you can get it figured out and do the test again.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
@@TheSmokinApe Thanks for the info. I don't think mine has the HW problems. I held my hand against the battery terminals and did not feel anything and held it across for at least 30 seconds or more. and I usually cup around them anyway. On the audio, had my wife listen on a UV5R, while I was about 25ft away, and said she did not hear anything other than my voice. So maybe I got a good one except it came as the GMRS. Thanks for all the updates. Oh, one question did you do any video on HOA antennas? 73 Kurt
So, assuming the FW does not fix "the problems" you identified earlier, is there a way via a serial number or date on the hardware (ie the radio) that would tell me if I got the new hardware or an old unit? Getting ready to buy one from Amazon.
I have not ordered mine yet. I am a virgin newbee buying my first radio so I can have something in my hand while I study for the FCC Tech License. My friend told me to just buy a Baofeng UV-5R. After looking at reviews, I thought TIDRadio was better for me because of larger keys and display. Then I thought a TD-H8 was better than a UV-5R (TIDRadio makes these also). Suggestions would be appreciated for my 1st radio.@@TheSmokinApe
Now the radio no longer powers on. There are several different firmwares and which one to use isn't very clear. Luckily I'm inside the return period with amazon
Can I use the long antenna that came with my radio 4 gmrs or is it made just for ham radio I appreciate someone help me out here thank you very much and Merry Christmas
@@TheSmokinApe hmm🤔 I go there and GMRS with a bunch of numbers I go down one to there then it puts me back up with a beep. Not getting anywhere on 42 Not unless I'm doing something wrong which is probably possible LOL
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Tird radio strikes again! Would an aioc work? How about the tird Bluetooth adapter? I repeat the process on the bricked radio to see if you can revive it.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
@@TheSmokinApeIf your radio does not complete the file upload process again even if it is not turned on, it will not come back to life. Try doing the process again and it will revive. It already happened to me and it's back!!
Interesting new oddity. I had an issue develop with my output being down from 10 to 8.5 after 2 months asked tidradio and did what they said to do no result, so i told them and they sent me a file to download to do a firmware update to V3 . so basically what i see from you is dont try it even if they tell me where to get the right cable
@@TheSmokinApe i see you said the app they tell me have to use a cable so i have asked where to get it, are sayiong you were able to do the firmware via the app ?
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I have learned that anything regarding a cheap radio you cannot be trusted on. Do you realize how much damage elitism is costing the hobby? Get. Over. Yourself.
I just received radio (ham) to replace my flawed 2nd generation one. New radio has version ham_230911 installed and so far seems fixed and works well. Was told to KEEP and enjoy the original one but no software update will fix it's issues but it will make a great GMRS radio so enjoy it that way. It has ham_230317 version. They did stay in contact & replace to correct troubles. N8OHV
@@TheSmokinApe BTW this was and will only be my only Chinese radio purchased out of curiosity......software & programming is atrocious! Glad it turned out as well as it did....... You do truly only get what ya pay for ! Hahaha! Thanks for your comment.......N8OHV
Step 6 says "Click Start, THEN turn on your radio". It is counter-intuitive but comes on with no screen display, and does the update.
exactly
I have updated my firmware just fine! Follow the instructions radio off click start then turn radio on. I am 2 for 2 radio updates
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
Could you update? For me it was easy and without any problem. Use a Tidradio cable and the A36
@@GmrsKissimmee I was finally able to update it 👍
You are a better man than me. That first one would have experienced an "unscheduled, rapid disassembly" against my brick wall.
Lol JD
Excellent. Followed the instructions as written, and flashed two of them without any issue. Thanks for the video. Got some hope for theses radios now. 73, KN4VA
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
The instructions say to click on start and THEN turn on the radio. I had your same issues but when I reversed the order and clicked on start first AND THEN turned on the radio, it updated firmware. It worked on two older radios.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Patience of a saint! I had that problem on the original radio before they went on sale; I could never get the cable seated so I just gave up. I asked TID to fix the material at the connector--I guess they did not want the expense of modifying the mold. Welp, I ordered the Abreeeeeee cable, that was a plus!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. You will love that cable...
@@TheSmokinApe I was really hoping the software was the fix.... This means they've tinkered with the innerds.
Yeah, apparently they were some with "faulty HW". I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Good video showing the software and firmware dont work and it bricks radios so good video showing to be cautious about doing it 17:32
I just got the H3, and am thinking about getting the H8... but your shirt just made this video even better 🤘🏻
Thanks 360 🤘
@360plussynthetics: The TD-H3 can be booted to GMRS, HAM, or Normal, modes. Thus, with the TD-H3 you have numerous options. Important, be aware when you boot the radio from one of those modes to another mode the rebooting process does a factory reset of all three. The radio frequencies and programing you input are gone. Using either Tidradio, Chirp or Odmaster, make sure you have created a backup; then it will be an uncomplicated process recovering your programing for each mode. With Odmaster, you can save it to your phone, iOS or Android, then restore it as needed; too-cool!
For those still having issues, do not turn on the radio until AFTER you press Start per the Read Me file.
I did include that in the description...
Yep this was the easiest firmware upgrade! I saw this video first, then went to another silent video, did exactly the same thing as that video and nothing happened, sooo i went to download the corresponding drivers for my system, clicked on the NEW BIN file Hit start THEN turned on my radio and VOILA!!!! Download Complete Version GMRS_230923!
Bless their hearts!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
That abbree programming cable is sweet 9:36
Yeah, I like it 👍
@@TheSmokinApe do you got a Link for that cable
You really tried to get it to work!! Great effort on your part, too bad the update failed.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
You did good work documenting the worst nightmare of firmware updates ape! I'm glad it wasn't one of your high dollar radios that would've REALLY hurt. Sounds like tidradio has some things to work out before you knock any more of your HT army out of commission!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
@@TheSmokinApe the ol' rtfm monster got you. I've been there!
@@TheSmokinApe Presumably this didn't work on the bricked radio?
@@andrewking3087 I was able to unbrick the brick 🧱
An interesting video, pleased eveyone sorted jt out un the end, I still love Tidradio handsets
Thanks for watching Peter 👍
Using a cable with the FTDI USB/Serial chip, had a successful upgrade on a TH-H3 (not the H8 - don't have one of those). I've seen the same 'plug fit' issue on some of the less popular Baofengs, had to do the same surgery, but was successful in completing the upgrade
I wish they made it easier 🤔
Your redirected to the same page after clicking on the video because the link in that html Website code is broken which is why its showing gray with a circle and triangle they didnt build the website right 4:40
I am having the same issue with the whining noise when I transmit. THe only work around I've found was that it doesn't do it with the tx power set on medium or low. I reached out to tidradio but haven't heard from them yet.
Sorry to hear that. I know they were getting flooded with support requests, I’d keep emailing 👍
@@TheSmokinApe Thanks. They did contact me late lastnight with a link to a firmware that seems to have solved my problem.
Ape please update the video. RandallRash is correct on step 6. I have updated my firmware by following the steps. My radio is on 230823. I am wondering what 230830 has?
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I don't think I am doing anymore videos on this radio...
That clears that up!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I told tid that they should accept returns on these radios and get people sorted properly. They didn't seem to want to do anything other than amazon returns - which AFAIK 'hurts their reputation' on amazon and those radios just get land-filled. Now I want to know how to get my hands on that pallet of returns. 🤔 @@TheSmokinApe
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
Off topic but... What are the differences between the ham and gmrs radios? Obviously the power levels. But because it appears that the GMRS radio can be modified to be a HAM or ALL it makes me wonder what the total differences really are. I am a Ham, but I bought two GMRS radios for my family. I will keep one and use it in the ALL configuration. I don't care about the 10w power as it is at best 3db but with a lot less battery life. Perhaps it is only the FCC approval??? Inquiring minds want to know. Tnx 73
Hey DG, they are a little higher than the Ham 70cm band, ham covers many different bands and gmrs is limited to one. Also there are different license requirements for both 👍
Once you open the program and before you press start, hold the PTT button and turn the radio on. Press Start and then release the PTT button it will download the software
Thank yoy
Hi, me again. Regardless of your words I bought one of these just to try 4/2024. Buzzing has gone, got it from Aliex to the uk, does get warm after about 20 minutes of use but the issue I’ve found, we use 12.5 the radio only does 12.0 the only workaround I can find is to set at 6.25 is this another issue or is it set for a different country. Regards, love the vids
Bandwidth is likely a regional setting but I’m not familiar with what y’all use over there. That said I’m sure these are GMRS radios that have been tweaked for ham frequencies and I’m pretty sure GMRS is 20KHz
I guess I got lucky, I got one in August from Amazon and its still version 230317 but with none of the issues. 🤷♂️
Did you put it on an SA?
Everything looks the same style of programming as on my Quansheng K6. To upload the firmware on my Quansheng to start the firmware update you turn on the radio holding down the push to talk button. The light should turn on which means it is in Firmware update mode. I don't think it is your cables. My Quansheng has an almost identical firmware update process. Software looks similar with the same fields.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
I did update mine yesterday using a UV5R cable , and I felt the click when I really pushed it in. I also used the same cable later to delete the GMRS channels that my Ham version came with and then uploaded Ham freq's using Chirp, as I could not get ODMaster to work. The update firmware I have is Ham 230911. Hope you can get it figured out and do the test again.
I had the exact same experience.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
@@TheSmokinApe interesting because they told me that the firmware update would correct it. Makes me wonder if I should return it to Amazon.
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
@@TheSmokinApe Thanks for the info. I don't think mine has the HW problems. I held my hand against the battery terminals and did not feel anything and held it across for at least 30 seconds or more. and I usually cup around them anyway. On the audio, had my wife listen on a UV5R, while I was about 25ft away, and said she did not hear anything other than my voice. So maybe I got a good one except it came as the GMRS. Thanks for all the updates. Oh, one question did you do any video on HOA antennas? 73 Kurt
So, assuming the FW does not fix "the problems" you identified earlier, is there a way via a serial number or date on the hardware (ie the radio) that would tell me if I got the new hardware or an old unit? Getting ready to buy one from Amazon.
Hey HTTY, it doesn't fix the issues. I did ask TID for the SN range and they wouldn't give it to me...
I have not ordered mine yet. I am a virgin newbee buying my first radio so I can have something in my hand while I study for the FCC Tech License. My friend told me to just buy a Baofeng UV-5R. After looking at reviews, I thought TIDRadio was better for me because of larger keys and display. Then I thought a TD-H8 was better than a UV-5R (TIDRadio makes these also). Suggestions would be appreciated for my 1st radio.@@TheSmokinApe
Ooof, Like a old truck, got tricks to get it started lol
Lol, thanks for checking it out BroJett 👍
I used a talkpod cable then turned it on after hitting start. Worked just fine. Program sure seems buggy though
I did make a mistake with step six, after doing it right I was able to do the FW upgrade
Now the radio no longer powers on. There are several different firmwares and which one to use isn't very clear. Luckily I'm inside the return period with amazon
Lmfao you said August 2019 when it's August 19th 2023 Lol bro 😂 3:20
D’oh!
@@TheSmokinApe I just thought it was hilarious 😂
Can I use the long antenna that came with my radio 4 gmrs or is it made just for ham radio I appreciate someone help me out here thank you very much and Merry Christmas
Hey LLO, Mine didn't come with one so I am not sure. Sorry man...
@@TheSmokinApe hey you wouldn't know where the mic gain is that do you I was told that should be turned up but I can't find it
Mic Gain is menu item 42
@@TheSmokinApe hmm🤔 I go there and GMRS with a bunch of numbers I go down one to there then it puts me back up with a beep. Not getting anywhere on 42
Not unless I'm doing something wrong which is probably possible LOL
@@TheSmokinApe u said the Mic gain on #42. Is that on gmrs or ham?
You bricked the radio. LOL. Maybe it’s salvageable. 73!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems. I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
no way , im not brickin my brick, il just wait for a solution.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
@@TheSmokinApe
its allright, im stuck with one too
I spoke to the folks at TIDRadio and the FW obviously will not fix the radios that had HW problems. If anyone has problems with the hardware I'd reach out to support@tidradio.com with the order number and a picture with the barcode.
The firmware update worked well for me. Can you explain the purpose for the power tuner app? Why would I need to adjust the power output?
Hey Doug. Sorry man, I haven't used that app...
No Mac software for upgrading firmware?
Not from the vendor
Then where?@@TheSmokinApe
I just got a pair of these and the version firmware I have is 230923.
Good luck with them 👍
At some point does he actually cover the firmware update?
No
Tird radio strikes again! Would an aioc work? How about the tird Bluetooth adapter? I repeat the process on the bricked radio to see if you can revive it.
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
@@TheSmokinApeIf your radio does not complete the file upload process again even if it is not turned on, it will not come back to life. Try doing the process again and it will revive. It already happened to me and it's back!!
@@GmrsKissimmee hey GK, yes I was able to unbrick the brick 👍
You bricked it because you started with turning on the radio. You didn't read the instructions?
I think I came clean about that in the description and in the comments, in any event it’s unbricked now
Interesting new oddity. I had an issue develop with my output being down from 10 to 8.5 after 2 months asked tidradio and did what they said to do no result, so i told them and they sent me a file to download to do a firmware update to V3 . so basically what i see from you is dont try it even if they tell me where to get the right cable
I was able to get it to work, the details are in the description BUT it didn't fix my noise problem 😯
@@TheSmokinApe i see you said the app they tell me have to use a cable so i have asked where to get it, are sayiong you were able to do the firmware via the app ?
@@keathrhymer5449 sorry for the confusion, I used the app I down loaded not the Bluetooth app
Please trying firmware update under ppl button ptt button 1
Hoe kan ik zien of ik een Gen2 koop ?
I asked for the serial number range and they declined
Tidradio Update software hold ppt bottom on radio
i updated the firmware and CAN confirm that it DID NOT work... there must be a hardware change.
Hey WF, I agree with the HW change. I was finally able to get two updated and they still had the problems.
Help hold ppt bottom
The firmware has not been firmed up yet
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
download driver CH340
They just can’t get it right can they.
Well, that appears to be the case but I did have a problem following instructions and was able to update it... the update didn't fix the problems
Uh, no thanks. I don't have 3 radios so I'll pass on this. 😮
Thanks for checking out the video 👍
The problem is you can’t follow directions
Thats true...
Apparently not!
I am a big ole dummy, the upgrade needs to be started with the radio off. After you start in the app, turn the radio on. I was able to upgrade the second radio, after the upgrade the radio continued to have the same problems.
I have learned that anything regarding a cheap radio you cannot be trusted on. Do you realize how much damage elitism is costing the hobby? Get. Over. Yourself.
Glad you liked the video Champ!
Two bottom ptt bottom
I just received radio (ham) to replace my flawed 2nd generation one. New radio has version ham_230911 installed and so far seems fixed and works well. Was told to KEEP and enjoy the original one but no software update will fix it's issues but it will make a great GMRS radio so enjoy it that way. It has ham_230317 version. They did stay in contact & replace to correct troubles.
N8OHV
Hey Gary, glad to hear they took care of you 👍
@@TheSmokinApe BTW this was and will only be my only Chinese radio purchased out of curiosity......software & programming is atrocious! Glad it turned out as well as it did....... You do truly only get what ya pay for ! Hahaha! Thanks for your comment.......N8OHV
@@Baccala4641 Agreed, I’m far from impressed 👍