My Sky doesn’t need this yet. I’ve done numerous friends and family headlights. I wet sand with micron grit paper and polish the scratches out with 3M and polish wheel on drill gun. I’ve never clear coated again I’ll have to try that.
There are hundreds of headlight restoration streams using old school wet sanding!! 🤪 It slows down surface removal as water acts like a lubricant and obscures any left over damage, Is messy and requires tons of elbow grease!! And please don't use 2k clearcoat on headlights it's far to hard and a nightmare to remove, As you find out in due course, If it's not written on the can for headlights don't use!! Always use a deadecated headlight clearcoat with UV protection!! One coat or two maximum as two many layers distortions light transmission!! Anyways a reasonable result for a novice!!🤔👍
I could not help mine went ahead and ordered new ones $325 each to bad you can’t just replace plastic only but work in progress I have a redline and only 60,000 on it but weather took toll on it also ordered new top because eventually the rear window will separate from the cloth and not repairable. Anyway thanks for another video
Came out great!
My Sky doesn’t need this yet. I’ve done numerous friends and family headlights. I wet sand with micron grit paper and polish the scratches out with 3M and polish wheel on drill gun. I’ve never clear coated again I’ll have to try that.
Great video!
Do u know how to activate the remote start part on the key fob?
Sorry. I don't have a remote start on my key fob. I didn't even know that existed for the Sky.
Mike Martin yes, I have a factory remote start but there is always after market starter kits.
Clare Bear forever if you haven’t found out yet you can look in your car manual and it will let you know how to do it beautiful.
Oh let me add. I think my Polaris Slingshot has the same motor as your Sky I believe?? Your motor looks great👍
Thanks. I try to keep it as clean as I can :)
There are hundreds of headlight restoration streams using old school wet sanding!! 🤪 It slows down surface removal as water acts like a lubricant and obscures any left over damage, Is messy and requires tons of elbow grease!! And please don't use 2k clearcoat on headlights it's far to hard and a nightmare to remove, As you find out in due course, If it's not written on the can for headlights don't use!! Always use a deadecated headlight clearcoat with UV protection!! One coat or two maximum as two many layers distortions light transmission!! Anyways a reasonable result for a novice!!🤔👍
Man I couldn’t leave you with just 49 likes😳 So here’s 50👍
Thanks for looking out for me man. Greatly appreciate it :)
Try adding a few drops of dish soap with the water when you wet sand
good job
Excelent Mike
Spray bottle helps
I could not help mine went ahead and ordered new ones $325 each to bad you can’t just replace plastic only but work in progress I have a redline and only 60,000 on it but weather took toll on it also ordered new top because eventually the rear window will separate from the cloth and not repairable. Anyway thanks for another video