@@RealSimPilot After clearing the waypoints between Sugol and Pevos, I noticed for a few times the flight plan became a dotted line on the PFD and the plane stopped following the flight plan, even after changing heading to managed mode. What did I do wrong? Thanks!
this video is great. I was having so much issues with this plane. I finally sat down and watched the entire hour, made my own step by step document which I now follow and havent had any issues! thanks so much!
The in-game does work! You have to turn on the radio VHF1 call button has to be on has a green bar above it then below turn up the volume and the in-game atc will start working
Hi, every time time I try and switch to the second page of the init to set ZFW etc it throws an error in the mcdu. Wondering if you now why as I can’t seem to access page 2. Cheers!
I have tried everything to make the plane follow NAV but nothing works. Sim brief flight plan has been lodged and uploaded into the EFB, ATSU doesn’t show pilot if for me but I request flight plan and it loads in. NAV route shows on the PFD correctly. Aircraft starts up in heading mode and cannot be taken out of heading mode. I have pushed on the heading knob, tried to intercept NAV and also flown DIR to next weigh point but nothing works! Any ideas on what to try next?
One issue I’m having is for my Departure airport and departure: my flight plan has a discontinuity right after my first waypoint that I cannot get rid of? Also the departure and first waypoint are at a 90 degree, and not a curved approach such as yours on takeoff
Hi everyone i don't know if this happens to anyone else but my AP does not follow the route i gave it im on xbox series S could someone help me ? Btw: instead of GPS PRIMARY written on the ND i got TCAS STANDBY even though i selected TA/RA Mode and made up a squawk code if that could help
Hey why is your airport map different then mine like you go through the air bridge at the airport and there is no air bridge on mine I doubled checked everything we are at the same spot and everything please help me
@@raiarasyad6945had the same problem as you lol : 1. Go to the EFB settings and search for enable tablet keyboard or anything relating to it 3. Click on: on 4. Input your simbrief id using the tablet keyboard not the xbox provided one 5. When your done just click on the dosn arrow on the EFB'S keyboard. 6. Go to your FMC and click on the mcdu button 7. Select ATSU 8. Type in your simbrief id then go back to the mcdu menu and click on FMGS (the top left button) and thats it ! Hope it helped
I did a step by step following this video. Not only did I learn how to set up flight plans for A320 V2, I felt like I flew like a real pilot. Thanks!
@ZL8103 well done!!
@@RealSimPilot After clearing the waypoints between Sugol and Pevos, I noticed for a few times the flight plan became a dotted line on the PFD and the plane stopped following the flight plan, even after changing heading to managed mode. What did I do wrong? Thanks!
this video is great. I was having so much issues with this plane. I finally sat down and watched the entire hour, made my own step by step document which I now follow and havent had any issues! thanks so much!
Great video, resolved a few issues with arrivals I was having ..
I just wish at this late date this plane would work with the in-game ATC. I'd do VATSIM but it's so intimidating
The in-game does work! You have to turn on the radio VHF1 call button has to be on has a green bar above it then below turn up the volume and the in-game atc will start working
@@wesideklown17 and then you're able to use the ATC menu to request and receive IFR clearances?
@@viviondioline yep sure can!
@@viviondiolineturn the pilot radio on and put sound on and it works
Hi, every time time I try and switch to the second page of the init to set ZFW etc it throws an error in the mcdu. Wondering if you now why as I can’t seem to access page 2. Cheers!
Where can I get the flow and check list your using ? Please
Everytime I start the engines my plane rolls forward and is crazy uncontrollable. How to fix that?.
I have tried everything to make the plane follow NAV but nothing works. Sim brief flight plan has been lodged and uploaded into the EFB, ATSU doesn’t show pilot if for me but I request flight plan and it loads in. NAV route shows on the PFD correctly. Aircraft starts up in heading mode and cannot be taken out of heading mode. I have pushed on the heading knob, tried to intercept NAV and also flown DIR to next weigh point but nothing works! Any ideas on what to try next?
Just a quick question. What download file of simbrief do you use so that the A320n v2 can integrate it into the ipad
how many frames are you gettings, i noticed with the inibuilds it eats frames alot more compared to the fenix?
very nice video, thanks for sharing it.
Thank you! It was very helpful
really good video will help me a lot thank you
Thanks for the video, hope you do it with vatsim after this.
It’s says hdg mode for me
Thanks for the video!
How can you also use atc while flying the plane
i don't seem to have the pilot ID in the ATSU menu in the mcdu
Amazing demonstration 💪🙏
Thank you 🙌
One issue I’m having is for my Departure airport and departure: my flight plan has a discontinuity right after my first waypoint that I cannot get rid of? Also the departure and first waypoint are at a 90 degree, and not a curved approach such as yours on takeoff
Did you press CLR on the discontinuity?
@@RealSimPilot I figured it out, some ATC's require direct departure/approach and cannot be discontinued, then you use the 'DIR' on MCDU
You can’t use simbrief on a phone it has to be on a PC?
Hi everyone i don't know if this happens to anyone else but my AP does not follow the route i gave it im on xbox series S could someone help me ? Btw: instead of GPS PRIMARY written on the ND i got TCAS STANDBY even though i selected TA/RA Mode and made up a squawk code if that could help
How do i get this into the game?
@@classicalmusic3979 it comes with the game. A320neo V2
For me both the FBW and inibuilds wont go past "CLIMB" in power but in the cockpit it shows that it is at full power. Is this a problem for everyone?
Yes
I've noticed it takes a hell of a lot longer to reach cruising altitude than the default A320.. Unless I'm doing something wrong lmao
Hey why is your airport map different then mine like you go through the air bridge at the airport and there is no air bridge on mine I doubled checked everything we are at the same spot and everything please help me
@@xaresxn download addon scenery from Flightsim.to
simbrief from the website is it free?
yes
would you be able to share your annotated checklist?
flightsim.to/file/4641/aegean-airlines-a320-normal-checklist
Thank you very much!
hey, every time i try to switch to managed heading mode it doesnt let me. please help!
@@JakeBradnum go to general options-accessibility-cockpit interaction system-set it to legacy
@@RealSimPilot thank you!
@@RealSimPilot Argh, pulled my hair out trying to arm the speed brakes, probably the same controls issue
What button is LNAV
I cant connect my simbrief id to the EFB, help me please... I am playing on xbox btw
Do I need to connect my laptop to the xbox?
@@raiarasyad6945 no just input your simbrief pilot ID into the EFB and the MCDU
I had to use my id# not your name to connect my simbrief.
@@raiarasyad6945had the same problem as you lol : 1. Go to the EFB settings and search for enable tablet keyboard or anything relating to it
3. Click on: on
4. Input your simbrief id using the tablet keyboard not the xbox provided one
5. When your done just click on the dosn arrow on the EFB'S keyboard.
6. Go to your FMC and click on the mcdu button
7. Select ATSU
8. Type in your simbrief id then go back to the mcdu menu and click on FMGS (the top left button)
and thats it ! Hope it helped
Will they ever release the charts for the EFB?
Are you from SA OR ZIM?
@@rebelsimracer7661 SA
Floating forever ! haha thats my main complain
I think this is not the easiest way 😂