Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Hi Steve. I am getting a P0700 on a 2014 Chevy Traverse I have a remanufactured, believe that it was simply rebuilt though. This code is part of the reason that I had to have the transmission rebuilt. I have taken it to the Trans shop and the regular mechanic and neither are able to find anything. The code itself is erased or "Not Present" at the time of inspection. We have lost faith in the vehicle do to this ongoing problem. Any suggestions that you can give is very appreciated.
If you clear the codes, you’d still have to wait for your car to run through a cycle of you starting it driving it a couple times to see if the check engine light will come back on after a few runs. You can’t just rescan it after you clear the codes and start at one time.
Hi I have a Holden cruze 2010 P0700 transmission control system (MIL REQUEST) P0751 shift solenoid "A" performance stuck/off What does it mean do I need a new gearbox? Or can't I service the transmission fluid filter ect and change the solenoids? I don't know what to do
While driving through an unusually intense 45 minutes torrential rain storm (lightening, the whole works) I received this code which resulted in very delayed shifting on the low end. I was able to drive the vehicle the 15 miles home at speed without an issue. The next day I took the vehicle out for a drive and it was shifting perfectly. So I cleared the code. No problem. Is it possible that the wiring coming out of the transmission control module and/or along the path could be exposed and the rain resulted in this code?
This same thing just happened to me, I think the wet roads got the water splashing and set it off, because I also drove home and didn’t have any issue. Cleared code and hoping it don’t come back :)
Well, though my theory as to the code's origin is potentially correct, in my case it wasn't. I was experiencing the first sign of what eventuated into a need to rebuild the transmission.
Hi Steve, 2014 traverse with only the P0700 code! Oil changed place said my fluid looked light in color and recommended a trans fluid flush! Should I start with that?
Hi Steve I have a 2009 saturn vue reading p0700. Service traction control and service stabilitrak appears on baseboard. I cleaned the throttle. The car has went into limp mode three times in the past. Any suggestions? Thanks a bunch
Hey Steve, I am having this code P0700 Code Pending and with other codes like P2008 showing Current,And the other code is showing P0327 Pending also. My car is Lumina ls 2007, It was smooth shifting before and now shifting very hard after first gear. I have changed the Gear oil when this issue started. Please help.
Hi Steve, I have a 2013 Chevy Malibu with 122k miles. Code P2097 and P0700. Doesn't want to shift to 2nd gear and when pushing the gas to accelerate theirs a stall to it
Hello, have you checked the condition of the transmission fluid? Check if the wiring to the o2 sensor is damaged and have a look at the exhaust system if there's any leak. The catalytic converter must also be inspected as it might be clogged.
You may check it by using a scan tool to check the readings and compare between banks. One way to check if there's any leak is you may hear a loud tick sound lower down on the engine.
I have a 2009 GMC Sierra it tell me code PO700 it has a delayed shift and bang really hard on transmission do I change out the transmission control module?
Hi Lex, have you checked the fluid? You'll know that the transmission is going out if the transmission fluid's color is rough and if you can find any metal flakes in it. Check also if there's an issue with the shift solenoid and the valve body.
I have a 2007 Subaru Forester XT. I’m getting the P0700 and 0725 code. It’s saying it’s the TCM. But my symptoms don’t sound related to that code. My car just died on me last week. Now it just won’t start. Would the TCM cause that?
Hi Roberta, since you are receiving multiple error codes, we suggest to get your vehicle visually inspected by your local mechanic for further diagnosis.
Hello, the TCM must be checked and a replacement might be needed. Also, since multiple codes are registering, we suggest taking your vehicle to your local mechanic to visually inspect and identify what's causing the issue.
Hey Steve. I have a 2011 chevy cruze and it's reading p0700 p0716 and p07bf. What do you suggest I do next. Transmission shop already changed my speed sensor. I burned something trying to jump my car and since then my transmission starts acting up momentarily
@@nondainc thank u for the reply. The Trans shop suggested the speed sensor,changed it and it fixed nothing. I was charged for that so I don't trust the transmission recommendations they had next. But the code reader suggested a bad speed sensor wire harness poor connection. Do you think they changed the harness when they changed the sensor?
Since you are getting multiple codes at the same time, we cannot guarantee the solution until visually inspect the vehicle. We suggested checking the TCM base on our experience. We will be waiting for your update, Evan.
Hi Ahmed, if there's no other codes that register along with this code, you can follow the yips/solutions provided in our video on how to fix P0700. Hope it helps!
Hallo sir, i have a 2010 Dodge journey, code DTC P0700 and P0883, What should I do to repair my car because in Indonesia there is no mechanic who has managed to repair it, please help me sir🙏
Hello Mr. Steve I have a 2011 Chevy Volt and I’m getting this code(P0700) as well as P0AC4 and U0100. What would you recommend. I’ve only had the car for about 2 years and it has about 71900 miles on it . What would you do in my situation. I definitely don’t have the funds at the moment to have it repaired by Chevrolet… so any thought?
@@nondainc I hate to be a bother but to make sure I’m inspecting the right thing I was trying to look up of maybe a diagram of the car parts or something but am not seeing anything. Would you know where I can get a video tutorial or at least a page to point the less gear heads like myself in the right direction ?
I have a GMC Terrain…..randomly throws a po601 code and check engine light…unhook battery and it runs fine for days…sometimes a month and pops on again. Yesterday got the code and a po700 code and it shifted funny after light came on, have any ideas? I’ve cleared it again and it’s ran fine since this…I’m confused 🤔
Hi Steve, I have 2012 Subaru Crostek XV and there is PO700, C1424, C1431, and B14A1 code currently active. Local dealer inspected and they said replaced with second-hand transmission valve body it fixing it is impossible. They said that they have to replace it with a new valve body which is cost around 2000 USD. Do you have a suggestion?
Hello, since you are getting multiple fault codes, we cannot provide you a guaranteed solution as visual inspection is recommended in this matter. We suggest getting your vehicle visually checked by other local mechanic (for a second opinion) if you are not satisfied with the first one who checked your vehicle.
@@nondainc Hi again, Currently I will have changed the 2 of selenoid coils on the transmission valve body in the another local supplier. Hope that it will work. I'll let you guys know about the results.
Hi Dianne, since you are receiving multiple error codes, we suggest to get your vehicle visually inspected by your local mechanic for further diagnosis.
I have a 2006 chrysler town and country van the give me 3 codes...P0700, P0404 and P0335. Please help me...What sensors are these...I really need my van fixed. I can only drive like 25/30 mph. ☹
Hi Shamica, since you are receiving multiple fault codes. We suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Hi Lex, we suggest setting up an appointment to get your car checked out further by your mechanic. To check the condition of the wirings, Transmission Control Module, Valve body, and Transmission shift solenoid for the necessary replacement.
Hi Jesus, if the suggestion in the video has been applied and the issue still persist, we recommend having your vehicle checked by a mechanic for further diagnostic.
Hi Frank, if there are no any other codes registering together with this code, check if there are shorted or open circuit within the transmission control module and if it's low on fluid or the color is rough/have metal flakes in it. These are the signs that the transmission is going out.
Hi Sharon, this code is triggered when the ECM has detected the input signal from the input speed sensor is lower than the specified range. Kindly have your local mechanic visually check the input/turbine speed sensor, output speed sensor and the torque converter if needs replacement.
Hi steve, my dodge caliber 2008, get p0700, p0730 & p0777. _how can you help me? _ can i drive the car? _does it possible the codes disappear by themselves?
Hi Hakeem, you might have a bad sensor or loose connector. What symptoms are you encountering? If your drivability/vehicle's performance is bad then you might need a new transmission.
@@nondainc the car starts, when i accelerate and depress gas pedal, the rpm response very slowly and the car begins to move very very slugish, then the car go and i can drive it almost at 90 mile speed without any problem, but when the car reach a speed pump, the problem will reappear, and the car doesnt go forward even i depress fully on the gas pedal, and the rpm doesnot rise or rise very very slowly or sluggish.
Hello, there's actually a problem with the transmission. Can you please double check to see if there's any other code registering together with this code?
I have 4 codes P2004 P0700 P2017 P0722 On a 2007 Dodge Caliber R/T 2.4 engine I replaced camshaft and crankshaft and manifold sensor The car losses power and will only go 15-25 mph then after awhile it will do normal speed. Just ordered a Trans output shaft speed sensor, any thoughts
Hello, we suggest taking your vehicle to your local mechanic for further diagnosis as performing a test (like pressurized smoke test) might be needed in order to identify the issue here.
Hi Steve, code po7000 popped up and after that code p2534 also popped up. I’ve already checked the tcm and it’s not that. Any other things I should check. And if I should get into code p2534 first or code po700
Hi Eduardo, as you are getting more than one error code, we suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Hi, I'm Steve, nonda's lead mechanic engineer.
Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Hi Steve. I am getting a P0700 on a 2014 Chevy Traverse I have a remanufactured, believe that it was simply rebuilt though. This code is part of the reason that I had to have the transmission rebuilt. I have taken it to the Trans shop and the regular mechanic and neither are able to find anything. The code itself is erased or "Not Present" at the time of inspection. We have lost faith in the vehicle do to this ongoing problem. Any suggestions that you can give is very appreciated.
I have dodge caliber 2008, get a p0700 and p0730 codes, can i drive the car
Your nondas head mechanic???😂😂😂😂😂😂 ok........
Lol😂 it is
If you clear the codes, you’d still have to wait for your car to run through a cycle of you starting it driving it a couple times to see if the check engine light will come back on after a few runs. You can’t just rescan it after you clear the codes and start at one time.
Hi Mr. Steve I have Silverado 2014 transmission rebuild but I’m still having code P0700 thanks you have a good day
Is this the only code you're getting?
@@nondainc yes
Hi I have a Holden cruze 2010
P0700 transmission control system (MIL REQUEST)
P0751 shift solenoid "A" performance stuck/off
What does it mean do I need a new gearbox? Or can't I service the transmission fluid filter ect and change the solenoids? I don't know what to do
Hi Nurka, since you are receiving 2 codes, we suggest getting your vehicle visually inspected by your local mechanic for further diagnosis.
While driving through an unusually intense 45 minutes torrential rain storm (lightening, the whole works) I received this code which resulted in very delayed shifting on the low end. I was able to drive the vehicle the 15 miles home at speed without an issue.
The next day I took the vehicle out for a drive and it was shifting perfectly. So I cleared the code. No problem.
Is it possible that the wiring coming out of the transmission control module and/or along the path could be exposed and the rain resulted in this code?
Possibly yes.
This same thing just happened to me, I think the wet roads got the water splashing and set it off, because I also drove home and didn’t have any issue. Cleared code and hoping it don’t come back :)
Well, though my theory as to the code's origin is potentially correct, in my case it wasn't. I was experiencing the first sign of what eventuated into a need to rebuild the transmission.
@@lazurm oh that sucks, how quickly did it come back on?
@@Rob-ln8mq It was random and unpredictable with the time ranging from minutes to as long as 3 days.
Hi Steve, 2014 traverse with only the P0700 code! Oil changed place said my fluid looked light in color and recommended a trans fluid flush! Should I start with that?
Hey I’m getting p0700 and P062F on my 2012 Chevy Cruze. Thoughts?
Hi Steve I have a 2009 saturn vue reading p0700. Service traction control and service stabilitrak appears on baseboard. I cleaned the throttle. The car has went into limp mode three times in the past. Any suggestions? Thanks a bunch
Hi Dave, have you double checked if there's any other trouble code registers together with this code?
@@nondainc p0700 and p2764
Hey Steve how’s it going, I found myself having trouble with this P0700 code on my Buick lacrosse 2014
I’ve spent 1700 last year buying new computer parts inside the transmission +labor, any tips?
Hey Steve, I am having this code P0700 Code Pending and with other codes like P2008 showing Current,And the other code is showing P0327 Pending also. My car is Lumina ls 2007, It was smooth shifting before and now shifting very hard after first gear. I have changed the Gear oil when this issue started. Please help.
Hello, since you are receiving multiple error codes, we suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Hi Steve, I have a 2013 Chevy Malibu with 122k miles. Code P2097 and P0700. Doesn't want to shift to 2nd gear and when pushing the gas to accelerate theirs a stall to it
Hello, have you checked the condition of the transmission fluid? Check if the wiring to the o2 sensor is damaged and have a look at the exhaust system if there's any leak. The catalytic converter must also be inspected as it might be clogged.
@@nondainc how would I check if the sensor is damaged or if theirs a leak in the catalyst converter
You may check it by using a scan tool to check the readings and compare between banks. One way to check if there's any leak is you may hear a loud tick sound lower down on the engine.
I got a po 700 code on my 2015 Tahoe. Anything I can do to fix it before taking it to the shop
Help
Hi Pamela, kindly check the Transmission Control Module. A replacement would be necessary.
I have U0100 and P0700 on a 2012 Cruze. Very inconsistent and nothing specific will trigger it
I have a 2009 GMC Sierra it tell me code PO700 it has a delayed shift and bang really hard on transmission do I change out the transmission control module?
Hi Lex, have you checked the fluid? You'll know that the transmission is going out if the transmission fluid's color is rough and if you can find any metal flakes in it. Check also if there's an issue with the shift solenoid and the valve body.
Thank you. Is it located under the dash ? Do you have to take out the dash or go from underneath ?
Hello, it is usually can be found below/underneath the engine, or under the hood near the battery/inner fender panel.
I have a 2007 Subaru Forester XT. I’m getting the P0700 and 0725 code. It’s saying it’s the TCM. But my symptoms don’t sound related to that code. My car just died on me last week. Now it just won’t start. Would the TCM cause that?
Hi Roberta, since you are receiving multiple error codes, we suggest to get your vehicle visually inspected by your local mechanic for further diagnosis.
Hey Steve, I have a 1999 honda prelude with 3 codes. The most important ones right now are P0700, and P0740. What should I do?
Hello, the TCM must be checked and a replacement might be needed. Also, since multiple codes are registering, we suggest taking your vehicle to your local mechanic to visually inspect and identify what's causing the issue.
Hey Steve I have a 2004 Volvo S80 t 6 and it's reading the po700 code what do you suggest?
And yes it's the only code I am receiving and can I buy a used tcm?I saw some on ebay for 30 dollars
Hi Nicholas, we suggest checking the condition of the TCM. A replacement could be necessary.
Nice Video .. Thx
We appreciate your feedback!
Hi Steve. I have an 07 GMC Acadia. I have the codes P0700 & P2715 . Should I be worried ? What do I need to do ? Will this be an expensive fix?
Hi Miaa, since you are receiving multiple error codes, we suggest to get your vehicle visually inspected by your local mechanic for further diagnosis.
Hey Steve. I have a 2011 chevy cruze and it's reading p0700 p0716 and p07bf. What do you suggest I do next. Transmission shop already changed my speed sensor. I burned something trying to jump my car and since then my transmission starts acting up momentarily
Hello, the issue could be coming from a faulty TCM. Kindly have it checked by your local mechanic to confirm. Thank you.
@@nondainc thank u for the reply. The Trans shop suggested the speed sensor,changed it and it fixed nothing. I was charged for that so I don't trust the transmission recommendations they had next. But the code reader suggested a bad speed sensor wire harness poor connection. Do you think they changed the harness when they changed the sensor?
@@nondainc I will definitely check the TCM after I try to fix any bad wiring harnesses
Since you are getting multiple codes at the same time, we cannot guarantee the solution until visually inspect the vehicle. We suggested checking the TCM base on our experience.
We will be waiting for your update, Evan.
@@nondainc thank you will definitely update you on the advice
I have a P0700 Transmission Control System (MIL Request) on my Cadillac ATS. How do I fix that?
Hi Ahmed, if there's no other codes that register along with this code, you can follow the yips/solutions provided in our video on how to fix P0700. Hope it helps!
Hallo sir, i have a 2010 Dodge journey, code DTC P0700 and P0883, What should I do to repair my car because in Indonesia there is no mechanic who has managed to repair it, please help me sir🙏
Where you able to fix it ?
I have both p0700 and u0073 with my service all wheel drive and service airbag light what steps should I take to get those codes removed
Hi Maliek, kindly check and see if the transmission control module is working (or if might need a replacement).
Hello Mr. Steve
I have a 2011 Chevy Volt and I’m getting this code(P0700) as well as P0AC4 and U0100. What would you recommend. I’ve only had the car for about 2 years and it has about 71900 miles on it . What would you do in my situation. I definitely don’t have the funds at the moment to have it repaired by Chevrolet… so any thought?
Hi Dakota, kindly inspect the transmission and all the wiring harnesses of the transmission. Repair/replace them if necessary.
@@nondainc I hate to be a bother but to make sure I’m inspecting the right thing I was trying to look up of maybe a diagram of the car parts or something but am not seeing anything. Would you know where I can get a video tutorial or at least a page to point the less gear heads like myself in the right direction ?
Did you end up fixing it?
I have a GMC Terrain…..randomly throws a po601 code and check engine light…unhook battery and it runs fine for days…sometimes a month and pops on again. Yesterday got the code and a po700 code and it shifted funny after light came on, have any ideas? I’ve cleared it again and it’s ran fine since this…I’m confused 🤔
Hi Jeff, since you are encountering multiple error codes, we recommend taking your vehicle to your local mechanic for further diagnosis.
I’m getting p0700 and P2706 going into limp mode on an 05 Jeep Grand Cherokee hemi
Hello, there could be a problem to the wiring or the solenoid. We suggest to have it inspected by the transmission specialist for further diagnostic.
I’m throwing a p0700 code on a 06 Jeep Liberty 3.7. Any advice where to get the tcm
Hi Nick, you can order a new TCM online, or another option is to have it repaired as the repair cost will be lower than replacing with a new module.
That is the back of a radiator, not a transmission case...
Hi Steve,
I have 2012 Subaru Crostek XV and there is PO700, C1424, C1431, and B14A1 code currently active. Local dealer inspected and they said replaced with second-hand transmission valve body it fixing it is impossible. They said that they have to replace it with a new valve body which is cost around 2000 USD. Do you have a suggestion?
Hello, since you are getting multiple fault codes, we cannot provide you a guaranteed solution as visual inspection is recommended in this matter. We suggest getting your vehicle visually checked by other local mechanic (for a second opinion) if you are not satisfied with the first one who checked your vehicle.
@@nondainc Hi again, Currently I will have changed the 2 of selenoid coils on the transmission valve body in the another local supplier. Hope that it will work. I'll let you guys know about the results.
@@norkun_ what ever happened?
i have a 2014chevy sonic and i am getting a p0700 and a p0601 code. any thoughts on this?
Hi Dianne, since you are receiving multiple error codes, we suggest to get your vehicle visually inspected by your local mechanic for further diagnosis.
I have a 2006 chrysler town and country van the give me 3 codes...P0700, P0404 and P0335. Please help me...What sensors are these...I really need my van fixed. I can only drive like 25/30 mph. ☹
Hi Shamica, since you are receiving multiple fault codes. We suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Hi, I have 2015 Subaru Impreza Premium 178,790 miles. I have code P0700 no other codes. What would be the cause ?
Hi Lucky, the TCM must be inspected and a replacement might be necessary.
Got this same issue with a 2010 Dodge Journey can’t find where to get the part my auto parts store can’t get them where can I find some
Hi Quintin, if you are referring to the Transmission Control Module, please head over to this link: amzn.to/3lCKae1
Hello I have a 2005 Dodge Durango with a P0700 code what should I do
Hi James, the issue could be coming from the TCM. Please check and replace it to see if the issue will still persist.
Hello Steve I have code p0700 on 2005 Honda Pilot is this something I need to worry about?
Hi Lex, we suggest setting up an appointment to get your car checked out further by your mechanic. To check the condition of the wirings, Transmission Control Module, Valve body, and Transmission shift solenoid for the necessary replacement.
I can’t find the Tcm on my 2017 silverado 1500
Hi David, it is located on the driver's side of the engine (near the firewall).
04 BMW 530i p0700 code ? Replaced the fuel pump & relay . Car cranks but doesn’t turn over ? Any help
Hello, have you double checked if there's any other fault code that registers along with this code?
@@nondainc p1721 p0128 but those have went away just the p0700
Hello, it's probably a sensor issue or PCM. Kindly have it checked and fixed.
@@nondainc thank you
You are most welcome!
Hi Steve I have p0700 Volvo how do I fix it
Hello, if this is the only code you're getting, replacing the TCM can fix the code. Thanks for watching!
Hello. I'm getting this code after my can ran extremely hot. Any thoughts?
Hi Columbo, are you getting any other codes aside from P0700?
Hello Steve I have code p0700 on a 2005 dodge ram 1500 4.7
Hi Jesus, if the suggestion in the video has been applied and the issue still persist, we recommend having your vehicle checked by a mechanic for further diagnostic.
So basically replace the *TCM*
Hello, can you please provide us with your vehicle's year/make/model?
Hello Steve I have a 05 cadillac cts it reads po 700. What should I do?
Hi Frank, if there are no any other codes registering together with this code, check if there are shorted or open circuit within the transmission control module and if it's low on fluid or the color is rough/have metal flakes in it. These are the signs that the transmission is going out.
Guys I'm getting P07BF code on my 2012 Chevy Malibu.
Hi Sharon, this code is triggered when the ECM has detected the input signal from the input speed sensor is lower than the specified range. Kindly have your local mechanic visually check the input/turbine speed sensor, output speed sensor and the torque converter if needs replacement.
Hi steve, my dodge caliber 2008, get p0700, p0730 & p0777.
_how can you help me?
_ can i drive the car?
_does it possible the codes disappear by themselves?
Hi Hakeem, you might have a bad sensor or loose connector. What symptoms are you encountering? If your drivability/vehicle's performance is bad then you might need a new transmission.
@@nondainc the car starts, when i accelerate and depress gas pedal, the rpm response very slowly and the car begins to move very very slugish, then the car go and i can drive it almost at 90 mile speed without any problem, but when the car reach a speed pump, the problem will reappear, and the car doesnt go forward even i depress fully on the gas pedal, and the rpm doesnot rise or rise very very slowly or sluggish.
2017 surburban and it just show the that code it’s has 77,000 miles.
Hello, there's actually a problem with the transmission. Can you please double check to see if there's any other code registering together with this code?
@@nondainc now the check engine light went away by itself
Hello, let us know once the issue reappeared and check for any related trouble codes.
I have 4 codes
P2004
P0700
P2017
P0722
On a 2007 Dodge Caliber R/T 2.4 engine
I replaced camshaft and crankshaft and manifold sensor
The car losses power and will only go 15-25 mph then after awhile it will do normal speed. Just ordered a Trans output shaft speed sensor, any thoughts
Hello, Im getting code P0700 and P0455 in Cadillac cts 2011
Hello, we suggest taking your vehicle to your local mechanic for further diagnosis as performing a test (like pressurized smoke test) might be needed in order to identify the issue here.
irritating damn snapping sound pisses away any good info. Delete it. PIA
Hi Steve, code po7000 popped up and after that code p2534 also popped up. I’ve already checked the tcm and it’s not that. Any other things I should check. And if I should get into code p2534 first or code po700
Hi Eduardo, as you are getting more than one error code, we suggest getting your vehicle visually checked by your local mechanic for further diagnosis.