Badlands Apex Winch Quick Connect Plugs

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии •

  • @vicc6744
    @vicc6744 5 месяцев назад +1

    was that 2ga wire adequate for your winch?

  • @SpearingWithSlurpey
    @SpearingWithSlurpey 4 года назад +1

    I like the cover. Put the truck in neutral and test the winch out.

    • @sean-rady
      @sean-rady  4 года назад +1

      Thanks! I wanted to protect it. And ill make a video doing that. I actually already did that and have the winch rope with tension now so it's ready to use.

  • @steveriley263
    @steveriley263 3 года назад +1

    Great info. Looking to put same on rear hitch.
    How long is the cable you purchase from Amazon?
    Thanks

    • @sean-rady
      @sean-rady  3 года назад +1

      The cable was actually part of the Badlands winch package from HF.

    • @sean-rady
      @sean-rady  3 года назад +1

      I'd say at least 6-8 feet would be needed. You can also trim it down.

  • @aarontown
    @aarontown Год назад

    just bought a used Xterra with this and also a 7 prong connector, both, in the rear. what were/are these for?

    • @sean-rady
      @sean-rady  Год назад

      I installed these for my winch to battery to switch set up.

  • @LarryDelbridge
    @LarryDelbridge 2 года назад

    where did you get the cover, can you share a link?

    • @sean-rady
      @sean-rady  2 года назад

      It's been so long, I can't source the link. If memory serves, it was an amazon purchase for winch covers.

  • @bryanguzman9734
    @bryanguzman9734 4 года назад +1

    Where did you get the mount plate and is it rated for 12k lbs? Also where did yo I get the cover?
    I just got me the same wicnch

    • @sean-rady
      @sean-rady  4 года назад

      I got the winch cradle from Wal mart. Shocking, but good specs and reviews on it. It could handle 12k pull. The front mount hitch receiver was a 9k rating.

    • @sean-rady
      @sean-rady  3 года назад +1

      @@backcountryboondocker6438
      I copied my walmart order below!
      Ecotric
      10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches

    • @sean-rady
      @sean-rady  3 года назад +1

      $56.00

    • @sean-rady
      @sean-rady  3 года назад

      @@backcountryboondocker6438 np man good luck

  • @kraigy28
    @kraigy28 3 года назад +1

    You’re losing a lot of amperage with those qd mounts. I believe they’re only rated at 175. Some are rated for 350 amps. But winches can max out at 400-430 amps. Momentarily,granted. But still.

    • @SirDadbod
      @SirDadbod Год назад +1

      i thought the same thing...meanwhile warn sells the same 175 amp quick connect with their 12k pound winch as an accessory,,and they use 2 guage wire for batteries...

  • @Mr2sday
    @Mr2sday 4 года назад

    So you ran the wire below your mount so you can drag them and damage them off road shorting out you battery?

    • @sean-rady
      @sean-rady  4 года назад +1

      I appreciate your round about suggestion. I wouldn't do it again this way next time, but do enjoy the benefits of the quick connect plugs.

  • @georgesedeno7891
    @georgesedeno7891 2 года назад

    Sorry. Very confusing post.

    • @sean-rady
      @sean-rady  2 года назад

      Lol, wasn't my best work.

    • @georgesedeno7891
      @georgesedeno7891 2 года назад +1

      @@sean-rady keep at it, camera work good.