Configuring Your Audio Interface
HTML-код
- Опубликовано: 21 сен 2024
- We take you through the basic configuration to get an audio interface working with Hauptwerk 4.
Audio Interface used: midiworks.ca/in...
For more on Hauptwerk Hardware we invite you to visit
www.midiworks.ca
All I wanted is for someone to say simply: Take a stereo audio cable that plugs into your speaker/headphone -out jack of your PC and the other end plugs into the stereo input jack of your selected amplifier/speaker setup. How simply can I put this??
Did we not already explain that well in the video for you? Or is there a particular issue you were having?
We want to hear from you so we know how we can improve our future tutorials.
Thanks.
@@ClassicOrganWorks ----Sorry I am such a pain. All I want is a YES or NO answer to the above question I asked. That is how I hook my system up, and it works fine. But is that the MOST correct way to do it?? Are there other, better ways? Thanks.
@@jrzzrj If you got it to work with sound coming out, then it worked. Our tutorial was mainly a recommendation to get the most out of Hauptwerk (hence the Audio Interface and how it works).
@@ClassicOrganWorks i have been having an issue with my asio driver its says that hauptwerk doesn’t recognize it but it had been working fine since I downloaded hauptwerk if you can help that would be awesome
@@newyorkfan9832 Have you checked the troubleshooting section of this video as seen here? ruclips.net/video/2S87lgRcu1w/видео.html
Thank you for your help. I have a set up that’s using multi channel outputs. I trying to get it back to 2. Left and right.How do I do this? Thank you
Hello Byron.
We have an article that goes over setting up multi channel routing via the link below. Have you checked it out to see how you can reverse the multi-channel setup to stereo?
www.contrebombarde.com/concerthall/home/view_cat/cat/3/sort/17/order/last_modified/limit/1000
Hope that helps for now.
Can you cover how to set up a multi-Channel set up where you can have certain sound coming from certain speakers?
Hello Blaze.
It is a tutorial we are planning to be make in the near future after we are finished with the ones we are currently working on. If you don't mind a read, we have an article that goes over setting up multi channel routing via the link below:
www.contrebombarde.com/concerthall/home/view_cat/cat/3/sort/17/order/last_modified/limit/1000
Hope that helps for now!
you all probably dont give a damn but does anyone know a method to log back into an instagram account?
I was dumb forgot my account password. I would appreciate any tips you can give me
@Alec Harper instablaster ;)
@Theo Toby Thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Theo Toby It did the trick and I finally got access to my account again. I am so happy:D
Thanks so much, you really help me out!
Thanks for your explanation!❤ One of my options in my laptop is Asio4all: v2. Does it mean that I've installed Asio4all yet?But I can't remember when I installed it
You're welcome. From what you said, it sounds like Asio4all v2 was already installed in your laptop beforehand. If it looks like you already have it, go ahead and give it a try and let us know if it works out. 🙂
- Jonny
@@ClassicOrganWorks Yes I have the sound and the latency is rather low, but the sound quality drops. Is that normal?
Can you please explain what you mean by "but the sound quality drops"? What and how does it drop? As in it's making cackling noises or something? Please clarify.
- Jonny
Sure. Although with much lower latency and no cackling noises, some details are missing, such as the sound of switching stops' blurry; less sharper high tones and less deeper low tones. Also some particular characteristics of some stops missed, too. The overall sound is not as clear as before.
Switching between speaker and headphone only.
For what exactly? Please clarify what you mean.