Perfect timing for this video. I was upgrading my switch and hadnt deleted the config folder when doing a fresh install of Atmosphere and Hekate and Sig patches and OFW (sysnand 10.2 to 19.0) and CFW (emummc from 18.1.0 to 19.0) The HATS pack came in handy and even introduced me to things i hadnt been using my modded switch for
Simple and straight to the point as always! I have a question (well, more like a clarification), if I update my stock and emummc to 19.0.1 will it still work, right? Apparently, I cannot really follow your steps completely because whenever I hold or select R when clicking the album button in SYSNAND, nothing shows up. So I thought I'll just update my stock firmware the old way Nintendo style.
You can update to 19.0.1, as this custom firmware also works on that version, but it seems the issue isn’t related to that. Have you tried opening the album menu without holding the R button? If you’re using the same custom firmware pack as in this video, it should work.
So i got to the last step where you reboot and select OFW to show that the NAND has been updated to 19.0. My switch won't let me make that option. I also notice that I do not have to use the RCM jig and press the button combo to get into RCM mode. Is this something I may have set to happen in Hekate's settings? I used incognito to zero out the serial on EMUmmc CFW. I dont think I have always used the sysnand boot option to update OFW. Should I make a fresh back up of my NAND from Hekate to be safe?
I forgot to mention at the beginning that this tutorial video is only for Switches using a modchip, not an RCM jig. Booting into the original firmware is different for Switches with a modchip. If you don't have AutoRCM installed, you can just boot the system normally.
i have an issue and i cant resolve it , the emmummc works fine , but im unable to boot sys mmc or stock one , i dont't know how to resolve the problem if anyone knows please help , it's an oled version
Write your Switch's Burn Fuse data here. Go to Hekate, select the Console Info menu at the top, and choose HW & Fuse. Check the Burn Fuse data in the top left corner. Write it down here.
I am getting this error when i update the firmware through daybreak. Validation failed with result: 0x00011805 Program id: 0100000000000804 Version: 19.0.0 COntent id: 3.....something something. Hekate has been updated to 6.2.2 and currently i am on firmware version 16
Perfect timing for this video. I was upgrading my switch and hadnt deleted the config folder when doing a fresh install of Atmosphere and Hekate and Sig patches and OFW (sysnand 10.2 to 19.0) and CFW (emummc from 18.1.0 to 19.0) The HATS pack came in handy and even introduced me to things i hadnt been using my modded switch for
Simple and straight to the point as always! I have a question (well, more like a clarification), if I update my stock and emummc to 19.0.1 will it still work, right? Apparently, I cannot really follow your steps completely because whenever I hold or select R when clicking the album button in SYSNAND, nothing shows up. So I thought I'll just update my stock firmware the old way Nintendo style.
You can update to 19.0.1, as this custom firmware also works on that version, but it seems the issue isn’t related to that. Have you tried opening the album menu without holding the R button? If you’re using the same custom firmware pack as in this video, it should work.
So i got to the last step where you reboot and select OFW to show that the NAND has been updated to 19.0. My switch won't let me make that option. I also notice that I do not have to use the RCM jig and press the button combo to get into RCM mode. Is this something I may have set to happen in Hekate's settings? I used incognito to zero out the serial on EMUmmc CFW. I dont think I have always used the sysnand boot option to update OFW. Should I make a fresh back up of my NAND from Hekate to be safe?
I forgot to mention at the beginning that this tutorial video is only for Switches using a modchip, not an RCM jig. Booting into the original firmware is different for Switches with a modchip.
If you don't have AutoRCM installed, you can just boot the system normally.
i have an issue and i cant resolve it , the emmummc works fine , but im unable to boot sys mmc or stock one , i dont't know how to resolve the problem if anyone knows please help , it's an oled version
Write your Switch's Burn Fuse data here. Go to Hekate, select the Console Info menu at the top, and choose HW & Fuse. Check the Burn Fuse data in the top left corner. Write it down here.
tinfoil doesnt start and stock firmware gives error with press hold 12 second power button when you boot it.
Are you using custom firmware like in this video (HATS)? Because I didn't encounter any issues.
Same
I am getting this error when i update the firmware through daybreak.
Validation failed with result: 0x00011805
Program id: 0100000000000804
Version: 19.0.0
COntent id: 3.....something something.
Hekate has been updated to 6.2.2 and currently i am on firmware version 16
The custom firmware and the original firmware versions should be the same. So you need to update the original firmware to version 19.00 first