LoCcdOutSS same! I went color match with clear lenses on mine. Each truck looks good with different things. The only trucks I think look okay with tinted lenses are the cat eye chevys but that’s just me!
The clear light bezels made a huge improvement! Looks really good now ryan. Your killin me with all the upgrades lol. Now i need to get started on the upgrades to my 97 superduty to catch up with u
You know... if you love those clips you’ll love a Ford Thunderbird. I once had to take the front clip off one. If the stud coming from the light housing breaks, off with the clip to get a saw in there.
That part that runs the width of the truck is called a Header Panel, if you're looking to replace it you can usually find em' brand new from an auto parts store for about $50-60, gives an added layer of security for your headlights.
Holy man. Looks good, for a ford that is 😂but seriously man the more you do to the OBS the more I’m falling in love with it! I can’t wait to see that bumper on there
I’ve order so much from them and love them, they also have billet door handles along with metal plates that help from the handles always getting broken
You can take the whole headlight assembly out the black part that holds the headlight grill etc and get to the clips a lot easier I think it’s like 6-8 bolts
For your door handle problem. In the mid to late 80's fords they have metal door handles. Or I believe you have enough resources to make one of your own.
@@CompletePerformance good possiblity that there's a deeper issue. Could very well be the peice that the plastic handle bolts to. It has a spring inside and I have seen the screw up. I used to run nothing but Ford.
On the clips, ninety degree snap ring pliers work the best. That’s what I did on mine and it got done in less than five minutes. As for the bottom one I stuck some wire down in it and pull it apart.
Get the door reinforcement plates from cp addict and then the billet handles for look. Its not the handles fault that it breaks. Its the door not being sturdy enough!
I never understood why they designed the lights that way. The 87-91 style was much easier to remove and install then they changed it on this body style.
To aim new lights park outside your warehouse in dark with lights on 20 or 30 feet away and aim up down side to side will make it easy. And alot better light patterns
They sell all metal replacement door handles, I was having the same issue where I would break in about every month. The metal ones are great and I’ve had it for about 6 months and haven’t broken it yet!
Get the billet obs door handles. They don’t break lol. If you can’t find them look at skoop’s (CJ’s) insta he has them on his truck and they’re not one-off.
Get some LEDs & switchback turn signals with some resistors just in case. Them side makers & bezel suck... the clips are worst but most people use the adjustment rod sticking up from the bottom bracket on the head light and reverse it till it pops off then reuse the part you cut off on the first headlight That black plastic part that goes all the way across is called a *header panel* The same adjustment rod you cut off just the bottom corner of the light It’s all the same on my 93 bronco
I took some needle nose plyers to that bottom clip putting through the side hole and barely grabbing ahold of it and they sell them clips at any auto parts store
I have a 96 bronco when I changed out my lights I took out the grille then 10 8mm nuts I guess you can say and it's the black plastic header behind the grille that pulls all the way out and you can take out all the clips easily but adjust your headlights before putting everything back together I learned the hard way lol
Dude I got the same headlights from CP Addict! Definitely a very awesome and reputable company! I haven’t yet put the lights in yet because I’ve been out farming #workforit but my obs is gonna be painted here soon and that’s when they’ll go in!
You should make some work for it pocket knifes, but not just any pocket knife, do the style with a razor blade that you can buy new blades at Home Depot and replace the blades as they dull down. Idk how easy that would be for you to make but I just think it would be cool to have one of those with the workforit logo on there
Awesome vid! Is it weird that I can't drive because i'm in a wheelchair & also suffer from seizures (the seizures being the reason why I can't drive) but yet I still love cars/truck & automotive content in general? Just something that's always interested me
Hell yeah I hear Tyler Childers playing in the back ground 🤘🏼
DMAXRYNO working on his own truck? Whaaaaaaat? Naw good shit sir. OBS looks great!
Headlights are simple tho
I’m usually not a fan of clear and chrome headlights but those look killer on that truck!
We thought they turned out great also!!
Agree, but i can’t stand tinted headlights, talk about truck rice
LoCcdOutSS same! I went color match with clear lenses on mine. Each truck looks good with different things. The only trucks I think look okay with tinted lenses are the cat eye chevys but that’s just me!
Glad I was able to help out! It was definitely an eye opener to see how much you guys do!
You should try out some switch back leds in the turn signals, white running lights 👍🏼👍🏼
Man I love how honest about sponsorship you are. That's awesome!
Honesty is always the best policy. That is why we wanted to work with him. Knew there would be an honest review!!
Paul and Chris at CPaddict are the bomb. I’ve got the same lights on my OBS.
Wow thanks for the shout out amigo!!!
The guys at CP are friends of mine, so it's cool to see them get some love on this channel too. Good guys working hard for the 92-96 guys.
Always a pleasure amigo!!
Its called a header panel. Easier when you take grill off then header with headlights on it then bumper last
That made a huge difference for the old obs Ford you got.
The OBS looks so much better with the new headlight and signal assemblies! Looking forward to seeing it with the LEDs in them.
Crazy what small changes do
Yeah it is. It refreshed the look of it alot. Kind of anxious to see that bumper on there as well.
The clear light bezels made a huge improvement! Looks really good now ryan. Your killin me with all the upgrades lol. Now i need to get started on the upgrades to my 97 superduty to catch up with u
Crazy how much small changes make huh
You know... if you love those clips you’ll love a Ford Thunderbird. I once had to take the front clip off one. If the stud coming from the light housing breaks, off with the clip to get a saw in there.
If everyone pitched in $2 we could get Ryan's OBS painted in no time.
Damn front end came out killer. Bumper will finish the badass look off. Definitely a good choice!
That looks freaking awesome. A lot of times they look super cheap but those look great.
Thanks a million
That part that runs the width of the truck is called a Header Panel, if you're looking to replace it you can usually find em' brand new from an auto parts store for about $50-60, gives an added layer of security for your headlights.
Wow that changed the look of that OBS alot!!
That ford is coming together.
Man that made the truck so much better
Awsome example for a work for it attitude and lifstyle, one thing for certain those ford door handles make ya work for it everytime lol.
It took you a few years but that 7 3 is looking sick. I can’t wait to c the bumper on.
Its going to be killer
You can also use snap ring pliers to open the clips on the headlights
CP also sells the kit to fix the door handle
He might just surprise everyone with the next video ;) ;)
And that is why I like chevy 99-07 they are so easy to take apart and put together. 😂
I gotta admit i heard tyler childers in the background and im just glad we have the same taste in music
Looks good!!! Can’t wait to see bumper installed.
Gonna be SWEET
Very glad to hear tyler childers, he is from close to where i live
Looks great.new bumper, grill and a whole straight pipe will look bad ass
Holy man. Looks good, for a ford that is 😂but seriously man the more you do to the OBS the more I’m falling in love with it! I can’t wait to see that bumper on there
I run the same set and I love them! I even put 2 led pods in the front bumper in the 4 little slots
Hey Ryno, need to buy this stuff called "Never Dull" and use that on your grill chrome. That stuff will make it shine upfront.
Finally what I've been waiting for, another Ford Vid!😅🥰
I’ve order so much from them and love them, they also have billet door handles along with metal plates that help from the handles always getting broken
RJ thanks so much for all of your support!!!
Wow the clear lights looks great
Crazy what small changes do
That looks sharp with the chrome. Love it
When @dmaxryno lifted the obs : im going for an old school look
Now: the amber looks to old school for the truck
I heard my man Tyler Childers in the background! Hell yea brother!
I heard his buckle left an impression somewhere...
Tony two times its on the inside of her thigh
There were little feathered indians
You can take the whole headlight assembly out the black part that holds the headlight grill etc and get to the clips a lot easier I think it’s like 6-8 bolts
Chrome and white go good together I’ve noticed recently
For your door handle problem. In the mid to late 80's fords they have metal door handles. Or I believe you have enough resources to make one of your own.
There is typically a deeper issue than just the handle. There should be a cool vid coming soon...
@@CompletePerformance good possiblity that there's a deeper issue. Could very well be the peice that the plastic handle bolts to. It has a spring inside and I have seen the screw up. I used to run nothing but Ford.
@@jamesbarnes3080 Typically its the metal on the door itself
Looks so much better with the clear lights
Right? Crazy what a small change will do
Looks awesome! Now time to do something with the grill to have the whole front end look new again. Keep up the great videos!
I normally like the amber look on obs trucks but this looks really nice
Crazy what small changes do
On the clips, ninety degree snap ring pliers work the best. That’s what I did on mine and it got done in less than five minutes. As for the bottom one I stuck some wire down in it and pull it apart.
Eric Rencken I’d like to see a video of you getting bottom ones off. Post one on RUclips, it’ll help a lot of people out!
Snap ring pliers works for spreading those clips. I have a 95 f350 powerstroke and have replaced my headlights.
Pretty cool that you listen to Tyler Childers. Us Kentuckians are very proud of him!
He's one of the real ones!
Get the door reinforcement plates from cp addict and then the billet handles for look. Its not the handles fault that it breaks. Its the door not being sturdy enough!
He may or may not have it already...stay tuned...LOL
Awesome!
Looks like you could use snap ring pliers to spread those clips apart
Fallen Angels gaming clan [FALN] I was thinking the same thing
Those new headlights look on the OBS
Angled snap ring pliers looks like they would work on the clips
That’s ford for you. Took 5 minutes when I did my 06 Silverado with the 2 pin system
I never understood why they designed the lights that way. The 87-91 style was much easier to remove and install then they changed it on this body style.
To aim new lights park outside your warehouse in dark with lights on 20 or 30 feet away and aim up down side to side will make it easy. And alot better light patterns
that is literally my dream truck! Very nice!
They sell all metal replacement door handles, I was having the same issue where I would break in about every month. The metal ones are great and I’ve had it for about 6 months and haven’t broken it yet!
Give that ole Ford some love!
Love those lights from CPAddict have the same ones on my dually. Actually looking at doing that bumper swap too
FREAKING awesome love seeing comments like this!!!
Those are sick dude, good choice
That’s so cool, I wish I had a whole warehouse to park my babies in. That’s super cool no fear of people stealing em
Great video bud love seeing ya work on ya own rig. Hope you have a good weekend man .
Lights look killer
next mod new style mirrors
Keep the great vids going
Now just need to linex or paint your truck!!! Another great video !! Representing San Diego
i am looking at a 1996 crew cab 4x4 that i may buy in a couple days. this video just made me more excited lol
Get the billet obs door handles. They don’t break lol. If you can’t find them look at skoop’s (CJ’s) insta he has them on his truck and they’re not one-off.
For anyone else looking
cpaddict.com/billet-inner-door-handle-set-1987-1997-f-series-bronco-pair/
I'm not going to lie at first i thought it was kind of dumb to do all of this to a work truck but damn proved me wong it looks to damn good now
Crazy how much simple changes can make in a truck
Damn old thing is looking sharp!
Super clean. Looks great.
I feel for you ryan. I switched out my headlights on my 1998 gmc k1500. It's amazing what new headlights do. I didn't have that kind of hassle
Get some LEDs & switchback turn signals with some resistors just in case.
Them side makers & bezel suck... the clips are worst but most people use the adjustment rod sticking up from the bottom bracket on the head light and reverse it till it pops off then reuse the part you cut off on the first headlight
That black plastic part that goes all the way across is called a *header panel*
The same adjustment rod you cut off just the bottom corner of the light
It’s all the same on my 93 bronco
My boy is a Tyler Childers fan?! That’s what’s up!🤘🏼
I took some needle nose plyers to that bottom clip putting through the side hole and barely grabbing ahold of it and they sell them clips at any auto parts store
That thing is clean all have one when the price is rite great job man!
My grandpa has a 94 an had to take it to ford to get the lights done even they said it was hard to remove them haha
If you need warp or tint ck out soundcheck they are down the street from Convoy auto repair.In Kearny Mesa.
Lookin good. I really like the older 150/250/350s
Us to LOL
Front looks badd ass on the obs. You should do some custom tow mirrors
I have a 96 bronco when I changed out my lights I took out the grille then 10 8mm nuts I guess you can say and it's the black plastic header behind the grille that pulls all the way out and you can take out all the clips easily but adjust your headlights before putting everything back together I learned the hard way lol
Listening to Tyler Childers hell yeah😂
Dude I got the same headlights from CP Addict! Definitely a very awesome and reputable company! I haven’t yet put the lights in yet because I’ve been out farming #workforit but my obs is gonna be painted here soon and that’s when they’ll go in!
Thanks for the support and shout out!!
CPaddict for sure!
Got my e-mail confirmation that my order has shipped! thx Bud
You should make some work for it pocket knifes, but not just any pocket knife, do the style with a razor blade that you can buy new blades at Home Depot and replace the blades as they dull down. Idk how easy that would be for you to make but I just think it would be cool to have one of those with the workforit logo on there
Love the clothes just wish you had my size but no one ever has my size but keep up the great content.
Loving the obs love as I own one also and have used cpaddicts for some of my parts
thanks bc i own a OBS and i didnt want to spend a lot of money for that tool so that helps me out a lot
the truck looks freaking awesome🤙🏼😜
Looks good man now u need the duramaxs mirrors for the OBS then u got it looking good
Now it time for Cab lights!!
You definitely left the cats off lmao sounds amazing
Your gonna have a fun time taking the factory down pipe out. Just did mine on my 95 7.3. It is no fun
Looks badass for a Ford.🤟🏽💯
Nice! Like new oldtimer!
This would have been a good project for the shop mechanic Wes!
Use the interior handle off a 80s model like 86 or something they bolt on the same and they are metal instead of plastic
Looks good now the 2 Bottom Bulbs gonna be the clear white
"me so Tokyo" next week the truck gets 2 step turbo conversion lol
Looks awesome now tow mirrors an cab lights, 👍🤷♂️
That bumper install better be happening today. Lol
Awesome vid! Is it weird that I can't drive because i'm in a wheelchair & also suffer from seizures (the seizures being the reason why I can't drive) but yet I still love cars/truck & automotive content in general? Just something that's always interested me
If you use long needle nose plyers and grab the middle of the clip and pull it's easy and I've never broke any clips on my 94 96 99 or my 03
WHERE THE HELL ARE THE TRUCK REVEWS??? WE WANT TRUCK REVEWS!!!
The view count is very low even when a girl was in it...may not be worth his time
Snap ring pliers might help on those clips