I really love the work you are doing. I learned about you in the interview you did with Build with Amoaa :) and been sharing your story every since then!
In short, no. The composition of ISSBs (soil type) is different from the materials used in burnt bricks which is why ISSBs are sun dried/cured rather than kiln cooked. We will be doing some upcoming videos comparing ISSBs and burnt bricks.
I have watched the video many times, the little problem am having is the roofing. How accurate is it to stand with the roofing. Meaning it won't cost problems to the roofing.. You guys need to put more information out there.
The bricks you are displaying are Compressed Stabilised Earth Brick (CSEB). The other brick, with the tongue and groove are Interlocking Stabilised Soil Bricks (ISSB) or they are also known as Hydraform Bricks. With the Hydraform Bricks, depending on what machine you use to make the bricks, you can get variations in length, which is not ideal for building any structure. The brick you are showcasing, with the cores / perforations is actually better for construction, as you are able to vertically and horizontally stabilise the wall with reinforcing and cement throughout the wall. The other benefit of CSEB are that you can run your utilities via the cores, without compromising the integrity of the wall. ISSB, you either run the utility on the outside of the wall, or cut into the wall and backfill with cement, thereby reducing the integrity of the wall. Please view the attached link for demonstration: ruclips.net/video/cWYyiE6OBE4/видео.html With hiding defects in the bricks, it is possible to cut a brick out and put a new face in place. Malaysian Interlocking Bricks have a video on RUclips, where they take to a brick with an angle grinder, remove the face, then place mortar on the back of the new face, then simply press into the wall. Please view the attached link for a demonstration of how to remove and refit a brick face in the wall: ruclips.net/video/lPRCVf8OsUM/видео.html Having seen several videos on RUclips, it is my thinking that there is a market for a 450 * 150 * 100 mm brick for internal wall use, especially at a 4 way meeting of walls. But, in saying that, Australians used to build with a 290 * 90 * either 90 or 76 mm brick. Depending on the brick, the 90 mm high were called Modulars, while the 76 mm high were either Glenline or Ranchline bricks, depending on who was making them! There is also a company that manufactures machines from Thailand, and Malaysia, whose machines are set up so that you can, if you wish, put finishes on the face of the brick. This can vary from an exquisite pattern to a rockface design. My hope is that my knowledge has been of help and of interest to you and your viewers. In the coming months, am looking to build my own machine, and set it up so that different types of blocks and bricks can be made from the one machine, thereby being more cost effective with the production of different products from the one machine. Currently, from what has been seen, if you want to make 3 different types of product, you require 3 machines. My system, if it can be done to what my thinking is, will be one machine that can be set up for different products and different sizes.
We will be sharing a video soon comparing the manufacture of ISSBs to burnt bricks, where we will touch on the issue of how to determine the composition of raw materials in ISSBs .
Well done. I have failed in getting an earth architect. My dream is to build a refuge for vulnerable women in my community and build them a cottage that will generate income for their basic needs while they try to stand back up again.
The amount you will pay depends on the local market/country where you are purchasing. We charge (at this moment) 5 GHC (about $0.40 USD) per brick for our ISSB
Each brick is 12 inches length by 6 inch width x 4 inch height. The holes (2 circular and one rectangular) in the brick are approximately 2 inches in length/diameter.
Good Morning. I'm Nigerian and I would like to know if you do business in Nigeria. I'm looking at building my dream house and want to know if you can advise accordingly. Thank you
Hello, we can pass your details onto an interlocking brick contractor we know that is based in Nigeria. Please contact us via email (info@enobricks.com) with your details and we can pass this on.
Hi Eno, I will need you to help me build my poultry and pig farms at Nkawie in the Ashanti region. Please let me know if you can then we can advance, thanks.
I really love the work you are doing. I learned about you in the interview you did with Build with Amoaa :) and been sharing your story every since then!
Amazing tutorial sister...keep on moving forward with IB in Ghana.
youve answered some of the questions i had about interlocking bricks! great video 👌👌
Glad to hear it!
November 2nd 2022 watching from the Caribbean and definitely love your properties
Excellent job Eno. Thanks for your hard work
Thanks, Kwame.
Well explained but please can interlocking bricks still go under the burning process... Can we have a burnt interlocking bricks?
In short, no. The composition of ISSBs (soil type) is different from the materials used in burnt bricks which is why ISSBs are sun dried/cured rather than kiln cooked. We will be doing some upcoming videos comparing ISSBs and burnt bricks.
Great question
Very well explained thanks Eno 😊 👍 🙏
Hello
Please can interlocking bricks be used for decking upper floors using the flat beams method?
yes, you could if you use the appropriate sized beams. We would also recommend using a structural engineer during the process.
I have watched the video many times, the little problem am having is the roofing. How accurate is it to stand with the roofing. Meaning it won't cost problems to the roofing..
You guys need to put more information out there.
The bricks you are displaying are Compressed Stabilised Earth Brick (CSEB). The other brick, with the tongue and groove are Interlocking Stabilised Soil Bricks (ISSB) or they are also known as Hydraform Bricks. With the Hydraform Bricks, depending on what machine you use to make the bricks, you can get variations in length, which is not ideal for building any structure.
The brick you are showcasing, with the cores / perforations is actually better for construction, as you are able to vertically and horizontally stabilise the wall with reinforcing and cement throughout the wall. The other benefit of CSEB are that you can run your utilities via the cores, without compromising the integrity of the wall. ISSB, you either run the utility on the outside of the wall, or cut into the wall and backfill with cement, thereby reducing the integrity of the wall. Please view the attached link for demonstration:
ruclips.net/video/cWYyiE6OBE4/видео.html
With hiding defects in the bricks, it is possible to cut a brick out and put a new face in place. Malaysian Interlocking Bricks have a video on RUclips, where they take to a brick with an angle grinder, remove the face, then place mortar on the back of the new face, then simply press into the wall. Please view the attached link for a demonstration of how to remove and refit a brick face in the wall:
ruclips.net/video/lPRCVf8OsUM/видео.html
Having seen several videos on RUclips, it is my thinking that there is a market for a 450 * 150 * 100 mm brick for internal wall use, especially at a 4 way meeting of walls. But, in saying that, Australians used to build with a 290 * 90 * either 90 or 76 mm brick. Depending on the brick, the 90 mm high were called Modulars, while the 76 mm high were either Glenline or Ranchline bricks, depending on who was making them!
There is also a company that manufactures machines from Thailand, and Malaysia, whose machines are set up so that you can, if you wish, put finishes on the face of the brick. This can vary from an exquisite pattern to a rockface design.
My hope is that my knowledge has been of help and of interest to you and your viewers. In the coming months, am looking to build my own machine, and set it up so that different types of blocks and bricks can be made from the one machine, thereby being more cost effective with the production of different products from the one machine. Currently, from what has been seen, if you want to make 3 different types of product, you require 3 machines. My system, if it can be done to what my thinking is, will be one machine that can be set up for different products and different sizes.
Excellent explanation, thanks for taking the time
Amazing! 🙏🏿🌍✨
Hello Eno, do you have trainings/ workshops dates for interested persons?
How do we finish the interior wall rough surface???
You can use a clear epoxy resin protection to apply on the surface if you want to maintain the brick finish for the interior.
Enjoyed the Q&A with important information. Would like to know what the ratio of the bricks raw materials are?
We will be sharing a video soon comparing the manufacture of ISSBs to burnt bricks, where we will touch on the issue of how to determine the composition of raw materials in ISSBs .
Can you tell me.please how.much pressure is needed when you make this with a automatic machiene like shown on youtube .
Well done.
I have failed in getting an earth architect. My dream is to build a refuge for vulnerable women in my community and build them a cottage that will generate income for their basic needs while they try to stand back up again.
Wow nice very informative.
Glad you liked it
Can some be a intern in your company and for how long? Because this is very interesting.
thank you for your explanation. how much i must pay for this ISSBS ?
The amount you will pay depends on the local market/country where you are purchasing. We charge (at this moment) 5 GHC (about $0.40 USD) per brick for our ISSB
Eno please I'm serious how do I get some of the bricks in Eastern region. I need a contact of urs.
Hi Afua, please call us on 0550092438
Can the walls made with these bricks be plasterd (if one so desires) like walls made with regular cement bricks?
The internal separation /partition walls can be plastered.
Why can't external walls.. and can we paint the walls made with it.??
@@shahnawaznizami4652 did you get answer for this question?
Why not external walls... ?
hello, I'm in search for the machine that makes the bricks. do you sell them?
From early next year. Please monitor our website for updates.
Perfect
What is the dimensions of each block and diameter of each hole?
Each brick is 12 inches length by 6 inch width x 4 inch height. The holes (2 circular and one rectangular) in the brick are approximately 2 inches in length/diameter.
@@enobricks9969 is it necessary to fill all the circular holes with mortar?
Dose it needs burn in oven?
No, they are dried in the sun to achieve the desired strength.
@@enobricks9969 thanks for fast reply but do you have number to WhatsApp you or contact?
Super 👍👍🎉🎉
Can't we plaster over it?
Yes.
Life span, Without plastering?
Same as a concrete block wall
Good Morning. I'm Nigerian and I would like to know if you do business in Nigeria. I'm looking at building my dream house and want to know if you can advise accordingly. Thank you
Hello, we can pass your details onto an interlocking brick contractor we know that is based in Nigeria. Please contact us via email (info@enobricks.com) with your details and we can pass this on.
Hi Eno, I will need you to help me build my poultry and pig farms at Nkawie in the Ashanti region. Please let me know if you can then we can advance, thanks.
Hi James, if you please contact us with your plan we can discuss.
Very beautiful bricks, and I love your explanation.
Are you on Facebook because I want to get in touch with you?
Hello, the best way to get in touch directly with Eno is wattsap 00233(0)202517806 or enobrix1@gmail.com
those random holes on the walls don't make them look pretty honestly
The holes are not exposed externally. The holes make the brick lighter and can be useful for reinforcement and for plumbing/electrical.
Would love to have a coffee with ya!