Hi there, just received my inkee falcon today and watched your video as walktrough guide in setting up the gimbal and hero 10. Just want to ask about the stabilization setting of gp10 while using the gimbal. Is it to be turned off while using the gimbal? Any recomendation for the best settings of gopro 10 while using the gimbal… thanks hope you notice 🙏🤞🏻
Can someone please help me find a piece that connects the gimbal to a go pro chest vest? I want to be able to walk hands free with the gimbal attached to my chest. I want to have very stable videos while l hike.
BUYER BEWARE:: I bought the inky Falcon plus gimbal at the first of Sept 2023. The first one I ordered not all of the buttons worked. It would do a 180° turn only 2 times then quit all together. 17:37 . It was hit or miss on some of the features. And I went to the Play App store And found nothing like the app that was featured in your video. I then returned the inky Falcon plus and purchased another one thinking will gosh this is just a defective gimbal. I received it 3 days ago and again not all of the buttons worked. And the button in the front with the 180° turn did not work at all. So I am returning it. 2 gimbles and meant both of them defective not a good track record. My question to you is how long did your Inkee Falcon Plus work? I will say that the gimbal didIs stabilize very very well.
Hello. Thanks for the comment. Glad the video helped. Hit the subscribe button and join my community. I have just launched a review video of this gimbal too if you wanna check it out. Ciao
just got today and found your video and it is very easy to understand because you did it step by step and slowly showed the buttons. I had and have other gimbals for phone and many of the options are similar, but still, you did it great. Most of them talk and talk faster than first forward cassette tapes. My age has no patience to read manuals. Thanks a lot. I saw you before, but did not subscribe before, and after watching subscribed that you deserve it.
Dear. Am India .. I have so much confusion in which gimble buy.... But after see your video... Am confidently order this gimbal.... Thank you... Very clear explanation.....
this video was veryyyy helpful,been watching so many videos about this gimbal trying to figure out to use it and i just did not understand. This is the best video ever. Thank you!!!! Now i can finally use my gimbal!!! veryy helpful!!
Brother, how can I send my gratitude to you? You just saved me. I've been trying to connect my falcon plus gimbal with go pro hero 11 black since morning today but it hasn't worked. The problem was the green light was not blinking. I didn't find any solutions. Finally I watched your video and just pressed the red button for 8 times and it solved. It's magic. maaan, you just saved me.
the user's guide didn't mention that I should balance it while it's powered off, and it kept shutting down as the motors couldn't handle the load while mounte on my bike. THanks a million for this informative video, and please keep up the good work.
Hi there. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry. Still, hit subscribe and join my community for more videos. Ciao
@@MamoAir Very sorry for the misunderstanding. Where I can buy the charging cable between the gimbal to the GoPro? (Soft, Flexible short cable) Any recommendations?
Thank fek that there are people like you who take the time to help others out. Life is complicated enough with out all this. This really helps Mamo. I have zero interest attaching everything to my phone. I just want a camera. I wont have my phone with me on location. I am just fine not been followed by the rich socialists. Can I just skip this stage?
Great video! Thanks! In my case, to connect the gopro to the gimbal, simply I held down the power button once gimbal turns on. The "eight times" resource doesnt work for me
Hi. Sorry I am not sure. You can check the compatibility on Inkee website or send them an email. Hope the video helped. Subscribe and join my community. Ciao
Can an action camera be setup vertically for vertical portrait mode filming with this gimbal? I know you showed the some what way to film portrait mode, Just curious about physically having the camera mounted vertically
Got my first GoPro (Hero11) along with Falcon Plus a couple days ago. Yours is a great video… I got all to work except with the media mod on my camera I can start the video with the rec button but it won’t stop the video. Without the media mod all works well. I don’t understand the problem I emailed customer service and awaiting to hear from them.
Thanks very useful. I have 3 problems: 1. sometimes M botten doesnt work you have to click several times. 2. GoPro 10 when I turn it on, it turns on and off again and again. You have to turn it off one more time and on to solve the problem. 3. Inkee somtimes turn on GoPro and sometimes doesnt. You have to turn on manually. I am not sure this is mulfunktion or there is some solution.
Hello there. Thanks for your feedback. I recommend to send an email to Hohem and ask about your issues, they might be able to help. Hit the subscribe button for more videos and join my community
Big LIKE!!! Hello... Thanks for the clip and the user guide. I am interested in buying this gimbal and I have two questions: 1. How long does the gimbal battery last under intensive use? 2. With a GoPro camera connected to the gimbal via the USB-C cable, does it manage to charge 100% the battery from the GoPro and continue to function for at least 1 hour after charging the battery from the GoPro...?! I want to know what to choose and if I'm going to buy this gimbal or VOLTA from GoPro. Thank you.
Great video Thank you. I do have a question, with the phone remote can you make the gimbal turn around the circle. Say put it in the center of the table and be able to turn the camera around the table to different people? Thank You,
Hi sorry, I know its an old video. but can you use it to create moving timelapse video. Like set up the gimbal to move from one point to an end point. I know the hohem gimbal can do this via the app.
Hi Debbie. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry. Still, hit subcsribe and join my community for more videos. Ciao
Hi, thanks for the great guide. It helped me figure out a few things. Just wondering if you can please explain the Time-Lapse Shooting function that is mentioned on the box of the gimbal ? Thanks again.
I want to mount this gimbal on the wing of my airplane. I understand that I can control camera operation and stabilizer through my phone. My question is, can I power the camera on wirelessly since I can't reach the camera on wing during flight?
Hi Jared. Thanks for the comment. You can try to use the Gopro app and see if it works at the same time as using the gimbal app. Good luck with the experiment! Sunbscribe for more videos. Ciao
What is best? There are so many different types of ND filters that fit the GoPro Hero 10. My question is which one is the best, it's not a question of the price but from which company is the best. There are from Sandmarc, variable ND filters. Tiffen has 3 ND filters plus 1 Polarid filter. Polar pro Shutter Collection, Neewer 4 pack filter ND and Telesin has Circular Polarizer Filter. Maybe there are some other filters that are better? Grateful for answers.
Hi. Thanks for the comment. I cannot answer your question as I have not tried them all. I use filters by Freewell and I am happy with then. I have made reviews o my channel. Hit subscribe and join me here. ciao
excellent review ... highly appreciated ... i did receive my inkee falcon plus yesterday ... just 2 questions: 1. it took almost 2 hours to update the firmware, what was your experience ? 2. in some reviews it says that you should turn hypersmooth on otherwise the videos will be shaky ... what is your recommendation? ... thanx👋👍
Hello, Glad to hear I could help. 2 hours to update the firmware sounds a bit long, it usually takes around 5 minutes. About the hypersmooth it depends. I recommend that you try and chose what is best for you. Sometimes gimbals and hypersmooth do not get along. Join my community and subscribe for more videos. Ciao
sir i am new user of GoPro 10..i wanna know where i can acquire or where to buy a INKEE falcos plus.. i am your avid followers from Philippines...thanks.
Hi. This gimbal cannot fit the media mod. Check the Inkee Falcon Plus instead, you can find a review on my channel. Hope the video was helpful. Join my community and subscribe for more content. Ciao
Hello. I do not have this gimbal with me anymore and I cannot remember. May be someone else will be able to answer your question. Hit subscribe for more videos and join my community. Ciao
The charging cable is included in the product packaging box, if you want to know, it is a type-C cable but just make sure to use a 5V2A charger since the falcon gimbal doesn't support fast charger.
Does connecting it to the phone just act as a remote control. If I am holding the gimbal already I can't operate two things at once. Just wondering why use the phone to operate it?
Hi Holly. Yes, connecting to a phone is not necessary but sometimes you get more features in the app, like timelapses ect. You could also control the gimbal from a distance if you want to film yourself. Hope it makes sense
I have a GoPro 9. When I click on start video, the GoPro starts working and recording video. But when you click to stop video recording, it doesn't stop. Do you know what can be done?
Great video! So by using the gimbal does it deactivate the built in stabilization or enhance it? Also I am thinking about buying the gopro 11 (I have the 10 now) will this gimbal handle the 11?
Hello. Thanks for the comment. By using the gimbal does not deactivate the internal stabilisation of the camera, but sometimes the images result blurry due to the excessive stabilisation. So it comes to your preferences. About the hero 11 you better ask to Hohem, as I do not know. Hit subscribe for more and join my community. Ciao
Hi. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry but everything I have done was shown in this video. Hit subcsribe and join my community for more videos. Ciao
Question for you, I bought the gimbal because of your review. I am having an issue, I have the GoPro 11 and I am running into an issue where I power up the gimbal and it shuts down about 30-60 seconds later. I try to connect it to the go pro but it keeps shutting down and yes it is fully charged. Any thoughts on what I am doing wrong? Great Vid BTW
Hello James, thanks for watching the video and for the comment. For this kind of technical problem, you better send a message to Hohem directly. Usually gimbals shut down also when the camera is not properly balanced on top of the gimbal. But cannot answer for sure. Consider to subscribe for more videos. Ciao
Received my inkee falcon plus a few days ago. Was having issues with balancing until i watched this post. Thank you for step by step tutorial. i have the media mod and was able to balance it as well after a few small adjustments, but my gopro hero 9 with media mods turns on by itself draining my battery. Question, is there a way faster way to remove gopro from inkee gimbal without rebalancing to change battery? (Yes i also learned from you reverse charging) 2nd question is there a way to stop media mod from turning by itself? Thanks in advance. Great tutorial! Thanks again.
Hi. Thanks for the message. To remove the gopro in a faster way, yoy might try some quick relase plates supplied by other companies like Manfrotto or Ulanzi but not sure if the gimbal will still balance properly. Hit subscribe and join my community
Amazingly helpful video! I was wondering if you know how to keep the gymbal from falling asleep. I use it on a tripod and after a couple of minutes the gimbal beeps and goes to limp. Is there anyway to avoid this?
There is something happening with the bluetooth connection between my Canon camera and the Falcon. When mye camera is of and the Falcon is on my lens on the camera start pulsating, the Falcon suddenly turns of. I sat the camera in airplane mod and everything works fine. So there is ann interference between the bluetooth frequency.
Hey, i've been suing this gimbal for about a month this summer and have noticed that the gimbal arms will go to "sleep" after a few minutes of recording sports. Is this an option to change in the app or a default action? And could this possibly be due to the motors overheating? It is quite hot in Texas this summer!
Hello there. Thanks for the message. I hope the video helped. I haven't experienced that the motors go to sleep, in my case. Usually that happens when the camera is not propey balanced on the gimbal and the motors are overworking. Not sure about the temperature. May be get in touch with the brand. Hit subscribe and join my community. Ciao
Hello and thanks for the comment. Do you mean the chest mount of the gopro? In that case no. I do not thinkg there are chest mounts for gimbals yet. Hit subscribe and join my community. Ciao
Hi Mamo.. I have a question. Do you think that with the Inkee falcon (not the plus one) would have space for the cable to plug in? Thanks for your review by the way
Also.. Do you know if there is a way to change (decrease) the speed of each axis when for example panning? Similar to the joystick speed menu that I am watching at your video, but changing the speed response without the joystick, just when panning or tilting.
Hello there. Thanks for watching the video. I honestly do not remember but the body of the 2 gimbals, Falcon and Falcon Plus, was very very similar, so I do not think you would have space for the cable on the Falcon
Even about this question, I do not remember as I do not have these gimbals anymore. Usually those settiings are though the app. Check it out. There are modes called, usually, Active, Walk etc...where the speed of the gimbal changes. Hope this helps. Hit subscribe and join my communitu here. Ciao
Just received my inkee falcon plus. It seems after setup that the camera is tilted to the left in PF and HL mode. Only when you select LPV mode will it straighten up. Has anyone else experienced this? Is there something I’m doing wrong?
Please help me out i received my Gimbal today but its doesn't work proper i just turned on and it got turned off automatically and red light blinking continuously.
Hello there. Thanks for the comment. I am not sure about waterproof features, may be check the brand website. Hit the subscribe button for more videos. Ciao
@@MamoAir I will check the website of course, however, I've already tried it in rain and it worked perfectly fine. Also, I've found and article in a blog mentioning that it's waterproof by design, but I should verify with the manufacturer of course. Thanks again
@@MamoAir Referring to the user's manual, here's a quote "Make sure that the stabilizer is not exposed to water or other liquids. " This is self-explanatory, but, I will try to check also with the company (if possible)
@@MamoAirManufacturer responded back to my email, and they don't recommend using it during raining times. So, the product is not even water repelant. Thanks and keep up the good work :)
Toll zu sehen, wie schnell man z.B. einen Lostplace Etage für Etage erkunden kann. Aus meiner Sicht auch fürs Gebirge und an der See geeignet. Selbst die Landwirtschaft dürfte mit einer solchen Drohne eine schnelle einwandfreie Kontrolle über ihre Felder erhalten. (Weinbauern ebenso)
This is a great guide but after using this gimbal for a day, and fiddling with it the whole time, I decided to return it. It just isn’t worth it to me. For low light it could be decent but with the right settings on the GoPro you can get great stuff without it. It’s all about locking that shutter speed.
Has the video helped you? Hit the Subscribe button then for weekly tutorials and video making tips. If you don't, you're a sloth! Just remember that!
Hi there, just received my inkee falcon today and watched your video as walktrough guide in setting up the gimbal and hero 10. Just want to ask about the stabilization setting of gp10 while using the gimbal. Is it to be turned off while using the gimbal? Any recomendation for the best settings of gopro 10 while using the gimbal… thanks hope you notice 🙏🤞🏻
Can someone please help me find a piece that connects the gimbal to a go pro chest vest? I want to be able to walk hands free with the gimbal attached to my chest. I want to have very stable videos while l hike.
BUYER BEWARE::
I bought the inky Falcon plus gimbal at the first of Sept 2023.
The first one I ordered not all of the buttons worked. It would do a 180° turn only 2 times then quit all together. 17:37 . It was hit or miss on some of the features. And I went to the Play App store And found nothing like the app that was featured in your video.
I then returned the inky Falcon plus and purchased another one thinking will gosh this is just a defective gimbal.
I received it 3 days ago and again not all of the buttons worked. And the button in the front with the 180° turn did not work at all. So I am returning it. 2 gimbles and meant both of them defective not a good track record.
My question to you is how long did your Inkee Falcon Plus work?
I will say that the gimbal didIs stabilize very very well.
I received the gimbal today. The instructions were written in very smal letters. So I found your video. Very helpful from the beginning to the end.
Hello. Thanks for the comment. Glad the video helped. Hit the subscribe button and join my community. I have just launched a review video of this gimbal too if you wanna check it out. Ciao
Go to their official website to read the electronic instructions, it's pdf file.
So ridiculously small they’re nearly microscopic. I just received mine today and a friend sent me the link to this video.
just got today and found your video and it is very easy to understand because you did it step by step and slowly showed the buttons. I had and have other gimbals for phone and many of the options are similar, but still, you did it great. Most of them talk and talk faster than first forward cassette tapes. My age has no patience to read manuals. Thanks a lot. I saw you before, but did not subscribe before, and after watching subscribed that you deserve it.
Hello. Thanks for the kind word. Glad I could help. Good to have you in my community. Ciao
One of the best tutorials available. Frankly, I love your videos and the plain language you explain things. Bravo.
Thanks Adam. Much appreciated
Dear. Am India .. I have so much confusion in which gimble buy.... But after see your video... Am confidently order this gimbal.... Thank you... Very clear explanation.....
Thanks for watching. Subscribe for more. Ciao
Best explanation of how to use this gimble, I've seen on RUclips, so far! Keep up the good work. Thank you...
Hello. Glad I could help. Hit subscribe for more and join my community. Ciao
this video was veryyyy helpful,been watching so many videos about this gimbal trying to figure out to use it and i just did not understand. This is the best video ever. Thank you!!!! Now i can finally use my gimbal!!! veryy helpful!!
Hello Chanie. Glad the video was helpful. Hit the subscribe button for more tutorials and join my commuity
This was very helpful thank you i watched plenty videos this is the only one i watched fully through thank you
Hello. Thanks for the comment, glad I could help. Hit subscribe then to support my community and for more tutorials. Ciao
Brother, how can I send my gratitude to you? You just saved me. I've been trying to connect my falcon plus gimbal with go pro hero 11 black since morning today but it hasn't worked. The problem was the green light was not blinking. I didn't find any solutions. Finally I watched your video and just pressed the red button for 8 times and it solved. It's magic. maaan, you just saved me.
Hello. Glad I could help. To say thanks you can just subscribe and stay tuned on the channel. Ciao
thank you for this video. excellent work.
Glad I could help. Subscribe and join my community. Ciao
@@MamoAir My Inkee just arrived…and again watching this tutorial. Thank you.
Great, hope you will enjoy it@@gilean6179
One of my favourite channels 🎥🎞️🎬
Thank you! Much appreciated
Have literally just ordered one tonight. This video has been a great help, informative and well paced. Thanks
Hello there. Hope the video helped. Subscribe and support my channel then. Join the community. Ciao
😎Will this Gimbal work with insta360 IcePro? I especially care about the pause and stop button for recording so that you can use one thumb
Thanks for the tutorial! Saved me from a lot of frustration trying to use the manual it came with.
Thanks for watching. Glad I could help. Hit subscribe for more tutorials. Join my community. Ciao
the user's guide didn't mention that I should balance it while it's powered off, and it kept shutting down as the motors couldn't handle the load while mounte on my bike. THanks a million for this informative video, and please keep up the good work.
Thanks for checking the video. Glad it helped. Stay tuned on the channel for more
This video was so helpful, perfect speed for beginners! Good job!
Hi Debbie. Glad I could help. Subscribe for more and join my community. Ciao
Thanks for the comprehensive and details guide... Have and good day and cheers ❤
Hello. Thanks for the message. Hope you are good. Glad to hear the video was helpful. Subscribe and join my community. Ciao
Most useful and very comprehensive. 👍🎬
Hi there, glad to hear you enjoyed the video. Join my community and hit subscribe for more tips! Ciao
Thank you!!! I finally got everything connected. Can’t wait to try it out. ❤
Hello there. Glad to hear I could help.
Sunscribe and join my community. Ciao
Hi, is the function „Motion Time Laps“ implemented into the software?
In the past it wasn’t so I wait for it…
Hi there. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry. Still, hit subscribe and join my community for more videos. Ciao
can the inke falcon plus be in follow mode
Thank you for the video. It was really helpful but what is the name-model where I can buy the charging cable between the gimbal to the GoPro? ♡♡♡
Hi Zita. Thanks for the comment. I am glad I could help. But I am sorry I do not understand your question :)
@@MamoAir Very sorry for the misunderstanding. Where I can buy the charging cable between the gimbal to the GoPro? (Soft, Flexible short cable) Any recommendations?
Thank fek that there are people like you who take the time to help others out. Life is complicated enough with out all this. This really helps Mamo.
I have zero interest attaching everything to my phone. I just want a camera. I wont have my phone with me on location. I am just fine not been followed by the rich socialists. Can I just skip this stage?
Hello there, thanks for watching the video, glad it helped out. Consider to subscribe for more tutorials then. Ciao
Anything I do to try and balance it it’s always tilting to the left slightly
Very good video and so helpful. Great job!
Thanks, glad I could help. Subscribe and join my commu ity. Ciao
hi, not sure if anyone had asked, what is the max payload for this gimbal? can i use it with a ulanzi casing that house the mic adaptor as well?
Great video! Thanks! In my case, to connect the gopro to the gimbal, simply I held down the power button once gimbal turns on. The "eight times" resource doesnt work for me
Hi Eduardo, thanks for the update and for tuning in, join my community and subscribe for more videos. Ciao
Thanks so much for your help on the setup really appreciated
Hello and thanks for the message. If the video helped I would appreciate your subscription then 😉. Thanks
Really nice video and looks nice gimbal for Gopro. I was wondering if this gimbal is compatible with DJi action4 camera. Do you know?
Hi. Sorry I am not sure. You can check the compatibility on Inkee website or send them an email. Hope the video helped. Subscribe and join my community. Ciao
Please post a link to that exact USB C cable shown in the video. I need to buy multiple of these.
Yes, the video very awesome. Thank you so much, subscribed to your channel. You have a wonderful day.....
Thanks Tommy. Appreciate it, glad you enjoyed the video. Stay tuned for more
Thanks...very helpful. Great tutorial...👍👍👍
Thanks. Hit subscribe and join my community. Ciao
Can an action camera be setup vertically for vertical portrait mode filming with this gimbal? I know you showed the some what way to film portrait mode, Just curious about physically having the camera mounted vertically
Got my first GoPro (Hero11) along with Falcon Plus a couple days ago. Yours is a great video… I got all to work except with the media mod on my camera I can start the video with the rec button but it won’t stop the video. Without the media mod all works well. I don’t understand the problem I emailed customer service and awaiting to hear from them.
Solved! I believe my issue was the need to connect or at least check wireless connections every time I use the gimbal.
Hope the video was helpful. Join my community and subscribe for more content. Ciao
Brilliant tutorial. Very handy as the instructions are useless. What was the length of changing cable you used, please?
Hello, sorry I cannot remember and I do not own this item anymore. Probably a 20cm cable. Subscribe to join my growing community. Ciao
Great video and excellent tips! Now looking forward to filming some stuff
Thanks you. Happy to hear you enjoyed the video. Hit subscribe then and join my community. Ciao
Soooo helpful. You just saved me a ton of time. Thank you!
Hello. Thanks for watching; glad I could help. Consider to subscribe and join my community. Ciao
Thanks very useful. I have 3 problems: 1. sometimes M botten doesnt work you have to click several times. 2. GoPro 10 when I turn it on, it turns on and off again and again. You have to turn it off one more time and on to solve the problem. 3. Inkee somtimes turn on GoPro and sometimes doesnt. You have to turn on manually. I am not sure this is mulfunktion or there is some solution.
Hello there. Thanks for your feedback. I recommend to send an email to Hohem and ask about your issues, they might be able to help.
Hit the subscribe button for more videos and join my community
Great video with clear instructions. Already subscribed your channel.
Thanks for watching!
Big LIKE!!! Hello... Thanks for the clip and the user guide. I am interested in buying this gimbal and I have two questions:
1. How long does the gimbal battery last under intensive use?
2. With a GoPro camera connected to the gimbal via the USB-C cable, does it manage to charge 100% the battery from the GoPro and continue to function for at least 1 hour after charging the battery from the GoPro...?!
I want to know what to choose and if I'm going to buy this gimbal or VOLTA from GoPro.
Thank you.
Hello. Thanks for the message. Unfortunately I do not have this gimbal anymore and cannot tell you. Sorry
Great video Thank you. I do have a question, with the phone remote can you make the gimbal turn around the circle. Say put it in the center of the table and be able to turn the camera around the table to different people? Thank You,
Hello. Glad I could help. Yes, of course, with the app you can control the gimbal's directions.
Hit subscribe then and join my community. Ciao
Great tutorial
Thanks. I hope it helped. Subscribe and join my community. Ciao
Excellent review. Your professional
Hello. Thanks...this is my job 😉. Subscribe and join my community. Ciao
Great tutorial, Thanks a million!!
Thank you for watching. Join my community and hit subscribe for more videos
Hi sorry, I know its an old video. but can you use it to create moving timelapse video. Like set up the gimbal to move from one point to an end point. I know the hohem gimbal can do this via the app.
I'm an old man with a limited walking ability (claudication). Which mode will be the most suitable for my walking style. Thank you.
Hi Adam. I think Follow mode can be good
Quite useful Post
Thanks.
Come sempre ottime spiegazioni, curioso di sapere se per go pro preferisci il Falcon o il crane m2
@@AlbertoBortoluzzi Ciao Alberto. Crane M2 S e' meglio. Più' versatile e potente
@@MamoAir grazie:)))
@@AlbertoBortoluzzi de nada
Hi, I have media mod and I'm wondering about the cable from gimbal to the cage. How long is Your charge cable?
Ah here it is the falcon app :) thanks a lot
Glad you found it. Hope I could help. Subscribe and join my community
Can you run the gimbal off of a powerbank? Or does it only charge the battery of the gimbal. Thanks.
Hi Debbie. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry. Still, hit subcsribe and join my community for more videos. Ciao
Hi, thanks for the great guide. It helped me figure out a few things. Just wondering if you can please explain the Time-Lapse Shooting function that is mentioned on the box of the gimbal ?
Thanks again.
Hello Ian. Thanks for the message. I do not have this gimbal anymore so I cannot help, sorry. Subscribe for more
Very good teacher ⭐️⭐️⭐️⭐️⭐️
Hi. Thanks for the kind words, hope the video helped. Hit subscribe and join my community. Ciao
thank you for the video. You saved me
Ciao Flavio. Grazie. Hope the video helped. Subscribe for more
I want to mount this gimbal on the wing of my airplane. I understand that I can control camera operation and stabilizer through my phone. My question is, can I power the camera on wirelessly since I can't reach the camera on wing during flight?
Hi Jared. Thanks for the comment. You can try to use the Gopro app and see if it works at the same time as using the gimbal app. Good luck with the experiment!
Sunbscribe for more videos. Ciao
hello do you think useing a etm-001 or SR-XM1 mics will the gimbal work with either mic ? really could use your help
Excellent video. Very helpful 😎
Thanks. Consider to subscribe for more. Ciao
What is best?
There are so many different types of ND filters that fit the GoPro Hero 10. My question is which one is the best, it's not a question of the price but from which company is the best.
There are from Sandmarc, variable ND filters. Tiffen has 3 ND filters plus 1 Polarid filter. Polar pro Shutter Collection, Neewer 4 pack filter ND and Telesin has Circular Polarizer Filter. Maybe there are some other filters that are better?
Grateful for answers.
Hi. Thanks for the comment. I cannot answer your question as I have not tried them all. I use filters by Freewell and I am happy with then. I have made reviews o my channel. Hit subscribe and join me here. ciao
@@MamoAir Thank you for your answer. I like your channel. 👍
Thanks so much . helps me a lot
Hi Dirk. Thanks for the feedback. Hit subscribe and join my community
hi mamo air you video really help. But could you help me how to connect with insta 360 one rs? i use this gimbal for insta 360 one rs. thank you
Hi. You better send an email to Inkee. I never had a insta 360
excellent review ... highly appreciated ... i did receive my inkee falcon plus yesterday ...
just 2 questions: 1. it took almost 2 hours to update the firmware, what was your experience ? 2. in some reviews it says that you should turn hypersmooth on
otherwise the videos will be shaky ... what is your recommendation? ... thanx👋👍
Hello, Glad to hear I could help. 2 hours to update the firmware sounds a bit long, it usually takes around 5 minutes. About the hypersmooth it depends. I recommend that you try and chose what is best for you. Sometimes gimbals and hypersmooth do not get along. Join my community and subscribe for more videos. Ciao
sir i am new user of GoPro 10..i wanna know where i can acquire or where to buy a INKEE falcos plus.. i am your avid followers from Philippines...thanks.
Salamat po. Thanks for following my channel. You can buy the Falcon on ebay or Amazon
Dear Mamo Air! Do you think it would be possible to stabilize the gopro if using a media mod and and small extra microphone? Would be too much weight?
Hi. This gimbal cannot fit the media mod. Check the Inkee Falcon Plus instead, you can find a review on my channel. Hope the video was helpful. Join my community and subscribe for more content. Ciao
@@MamoAir Thanks. However, I guess I wrote the comment in the right video!
Thanks for that, is there timelapse functions in the app ? Thanks
Hello. I do not have this gimbal with me anymore and I cannot remember. May be someone else will be able to answer your question.
Hit subscribe for more videos and join my community. Ciao
excellent review, thanks
Hello. Thanks for the comment, glad I could help. Hit subscribe then to support my community, and for more tutorials. Ciao
Will it connect to Hero 4 session? Your text started with Gopro 5....Was hoping to use with Session
Hi Jeff. Sorry I cannot help as I do not use the Session. You better send a message to the brand.
Subscribe and join my community. Ciao
@@MamoAir FYI, the GoPro Session is just too light weight, gimble will not balance level.
Superb
Hello. Thanks for the message. Glad you enjoyed. Subscribe and join my communitý
You are the best, thank you!😅
Thanks for watching. Hit subscribe for more. Happy new year
this video is from 2 yrs ago and it says for gopro up to 10. Can we use it for gopro hero black 12 now?
Heya, thanks for the detailed guide on how to setup the gimbal. Could you also advise the link for the charging cable ?
The charging cable is included in the product packaging box, if you want to know, it is a type-C cable but just make sure to use a 5V2A charger since the falcon gimbal doesn't support fast charger.
@@helenalee8168 So anything higher than 5v2a doesn't work...? It's sad because I can see only fast charging cables so far on the internet...
Does connecting it to the phone just act as a remote control. If I am holding the gimbal already I can't operate two things at once. Just wondering why use the phone to operate it?
Hi Holly. Yes, connecting to a phone is not necessary but sometimes you get more features in the app, like timelapses ect. You could also control the gimbal from a distance if you want to film yourself. Hope it makes sense
Can I use with a sleeve on the GoPro , or even a protective waterproof case ?
Hi. Sorry I cannot answer this question as I have not tried with your setup. Hit subscribe and join my community. Ciao
I have a GoPro 9. When I click on start video, the GoPro starts working and recording video.
But when you click to stop video recording, it doesn't stop.
Do you know what can be done?
Great video! So by using the gimbal does it deactivate the built in stabilization or enhance it? Also I am thinking about buying the gopro 11 (I have the 10 now) will this gimbal handle the 11?
Hello. Thanks for the comment. By using the gimbal does not deactivate the internal stabilisation of the camera, but sometimes the images result blurry due to the excessive stabilisation. So it comes to your preferences. About the hero 11 you better ask to Hohem, as I do not know.
Hit subscribe for more and join my community. Ciao
Thanks for the great tutorial brother. I couldn't help but notice you look a lot like Abraham Lincoln lol.
Thanks for checking the video. I think someone mentioned Lincoln before lol. Subscribe and join my community. Ciao
do you have to have the gopro connected to your phone to connect to the gimbal? i cant get mine to connect but its not connected to my phone.
Hi. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry but everything I have done was shown in this video. Hit subcsribe and join my community for more videos. Ciao
Hi Mamo Air. Do you have any idea if I can use the Inkee Falcon Plus inverted = (Upside down 180 degrees) with the GoPro Hero 10?
Hello there. Yes you can, I used it upside down. Hit the subscribe button and join my commuity
Thank you very much Mamo Air
@@divisionbreak no problem
大変参考になりました。ありがとうございます。
Arigatou gozaimasu. I love Japan, I came back yestreday from there!
@@MamoAir 今、歴史的な円安です。お得に日本旅行が出来ます。
ぜひ、日本に遊びにお越しください👍
チャンネル登録しました。今後もよろしくおねがいします。
Question for you, I bought the gimbal because of your review. I am having an issue, I have the GoPro 11 and I am running into an issue where I power up the gimbal and it shuts down about 30-60 seconds later. I try to connect it to the go pro but it keeps shutting down and yes it is fully charged. Any thoughts on what I am doing wrong?
Great Vid BTW
Hello James, thanks for watching the video and for the comment. For this kind of technical problem, you better send a message to Hohem directly. Usually gimbals shut down also when the camera is not properly balanced on top of the gimbal. But cannot answer for sure. Consider to subscribe for more videos. Ciao
Received my inkee falcon plus a few days ago. Was having issues with balancing until i watched this post. Thank you for step by step tutorial. i have the media mod and was able to balance it as well after a few small adjustments, but my gopro hero 9 with media mods turns on by itself draining my battery. Question, is there a way faster way to remove gopro from inkee gimbal without rebalancing to change battery? (Yes i also learned from you reverse charging) 2nd question is there a way to stop media mod from turning by itself? Thanks in advance. Great tutorial! Thanks again.
Hi. Thanks for the message. To remove the gopro in a faster way, yoy might try some quick relase plates supplied by other companies like Manfrotto or Ulanzi but not sure if the gimbal will still balance properly.
Hit subscribe and join my community
Brilliant vid
Hello. Glad you enjoyed the video, hope I could help. Subscribe then and join my community. Ciao!
Hello i have a problem with charging, when i plug it in the power it flashes only FPV and is not charging do u have a solution for that ?
Hello. Thanks for the message. Not sure why that happens, get in touch with the brand directly. Thanks
New subscriber brother man.
Hello. Thanks for joining my community. Hope these video will be helpful. Ciao
Amazingly helpful video! I was wondering if you know how to keep the gymbal from falling asleep. I use it on a tripod and after a couple of minutes the gimbal beeps and goes to limp. Is there anyway to avoid this?
Hi Jesse. Thanks for the comment. Usually gimbals go asleep when they are not balanced properly. Make sure it is. Other than that I am not sure why
@@MamoAir I did notice that its starting position was facing slightly downward. I will try to balance it again. Thank you for your help!
@@Whooperhalo my pleasure
There is something happening with the bluetooth connection between my Canon camera and the Falcon. When mye camera is of and the Falcon is on my lens on the camera start pulsating, the Falcon suddenly turns of. I sat the camera in airplane mod and everything works fine.
So there is ann interference between the bluetooth frequency.
Hey, i've been suing this gimbal for about a month this summer and have noticed that the gimbal arms will go to "sleep" after a few minutes of recording sports. Is this an option to change in the app or a default action? And could this possibly be due to the motors overheating? It is quite hot in Texas this summer!
Hello there. Thanks for the message. I hope the video helped. I haven't experienced that the motors go to sleep, in my case. Usually that happens when the camera is not propey balanced on the gimbal and the motors are overworking. Not sure about the temperature. May be get in touch with the brand.
Hit subscribe and join my community. Ciao
Hello there, will this work with the chesty mount?
Hello and thanks for the comment. Do you mean the chest mount of the gopro? In that case no. I do not thinkg there are chest mounts for gimbals yet. Hit subscribe and join my community. Ciao
hey mamo. if i had a ulanzi metal cage on my gopro 10. would it still be able to mount to the falcon plus gimbal?
Hello there. Sorry I have not tried it with the cage so I cannot tell. Hit the subscribe button and join my community. Ciao
Hi Mamo.. I have a question. Do you think that with the Inkee falcon (not the plus one) would have space for the cable to plug in? Thanks for your review by the way
Also.. Do you know if there is a way to change (decrease) the speed of each axis when for example panning? Similar to the joystick speed menu that I am watching at your video, but changing the speed response without the joystick, just when panning or tilting.
Hello there. Thanks for watching the video. I honestly do not remember but the body of the 2 gimbals, Falcon and Falcon Plus, was very very similar, so I do not think you would have space for the cable on the Falcon
Even about this question, I do not remember as I do not have these gimbals anymore. Usually those settiings are though the app. Check it out. There are modes called, usually, Active, Walk etc...where the speed of the gimbal changes. Hope this helps. Hit subscribe and join my communitu here. Ciao
Can you use this with the gropro 9black ?
Hi. Thanks for the comment. You better check the cokpatibility of cameras on the hohem website to be sure. Hit subscribe and join my community. Ciao
I tried to make a timelapse , using the tripod but in few minutes the gimbal turned off. Anyidea how to fix it?
Can I connect action cam other than the GoPro's via wifi connection?
Does this gimbal charge the gopro?
Hi. The answer is in this video 15:53.
Does this gimbal not support tracking?
Just received my inkee falcon plus. It seems after setup that the camera is tilted to the left in PF and HL mode. Only when you select LPV mode will it straighten up. Has anyone else experienced this? Is there something I’m doing wrong?
Great review. Has anyone told you that you look like a handsome Abraham Lincoln? Not trying to make fun and its not a bad thing. Interesting videos
Hi there. Thanks for the message. I wish I was as clever as he was too. Hit subscribe and join my community. Ciao
Please help me out i received my Gimbal today but its doesn't work proper i just turned on and it got turned off automatically and red light blinking continuously.
Hello. For this kind of issues you better ask to the brand directly. Consider to subscribe. Ciao
Hi Mamo, just received my Falcon Plus Gimbal but can't find the app in the Play store. Which app can I use to operate my gimbal?
Falcon app auf der Inkee Webseite
Thanks a gain for the video, but do you have any idea if this gadget is water resistant as I shoot during rain?
Hello there. Thanks for the comment. I am not sure about waterproof features, may be check the brand website. Hit the subscribe button for more videos. Ciao
@@MamoAir I will check the website of course, however, I've already tried it in rain and it worked perfectly fine. Also, I've found and article in a blog mentioning that it's waterproof by design, but I should verify with the manufacturer of course. Thanks again
@@MamoAir Referring to the user's manual, here's a quote "Make sure that the stabilizer is not exposed to water or other liquids.
" This is self-explanatory, but, I will try to check also with the company (if possible)
Great. Thanks
@@MamoAirManufacturer responded back to my email, and they don't recommend using it during raining times. So, the product is not even water repelant. Thanks and keep up the good work :)
Thanks for that 🤜🤛🙂
Thanks for watching. Stay tuned for more
Toll zu sehen, wie schnell man z.B. einen Lostplace Etage für Etage erkunden kann. Aus meiner Sicht auch fürs Gebirge und an der See geeignet. Selbst die Landwirtschaft dürfte mit einer solchen Drohne eine schnelle einwandfreie Kontrolle über ihre Felder erhalten. (Weinbauern ebenso)
Hope this means something good. Sray tuned. Ciao
This is a great guide but after using this gimbal for a day, and fiddling with it the whole time, I decided to return it. It just isn’t worth it to me. For low light it could be decent but with the right settings on the GoPro you can get great stuff without it. It’s all about locking that shutter speed.
Hi Eric. Thanks for the feedback. Great to hear you know what you are after. Hit subscribe and join my community
It's true quality wise of the video but if you want to pan the camera without changing angle, then only gimbal can solve it!