Pressure Cooker Repair - Replacing the Sealing Ring & Overpressure Plug (Presto Part # 9936)
HTML-код
- Опубликовано: 27 окт 2024
- www.ereplacemen... Click here for more information on this part, installation instructions and more.
This particular sealing ring is specific to Presto manufactured brands. To find a sealing ring and overpressure plug specific to your model, visit eReplacementParts.com.
If your pressure cooker is showing any of these symptoms; replacing the sealing ring and overpressure plug set could solve your problem:
1) Steam leaking from pressure cooker lid
2) Lid won’t seal tightly to pressure cooker
3) The rubber seal is cracked or worn
4) Overpressure plug not sealing or leaking steam
5) Rubber pressure plug grommet worn or cracked
6) Cooker not holding pressure
eReplacementParts.com part number: 09936
Tools used for this repair/replacement:
1) Small screwdriver
Get model-specific repair help from eReplacementParts.com. Learn how to troubleshoot, diagnose and repair your power tools and equipment with illustrated instructions, hundreds of step-by-step repair videos, and our DIY forum. If you have a power tool or appliance problem, we can help. www.ereplaceme...
Hi my presto pressure cooker lid is stuck want open tried everything it want open Please can you tell me what I can do thanks
Is the overpressure plug supposed to be kind of moving around rather than sitting snugly and securely in its place?
can you please tell me what the white plug/seal is that is on the bottom of the button in the handle....I would appreciate it very much
Why do these Presto have a rubber overpdessure plug whereas Fissler does not seem to have one? Ive had the plug shoot out on one occasion and it was because the rubber had deteriorated significantly
I plugged in my instant pot and poured a cup of water and some white rice into the exterior pot without placing the interior pot first!! I'm very upset because there are little pieces of rice stuck at the bottom. How can I get this repaired? I'm assuming it would be dangerour for me to use it with the rice stuck there. PLEASE ADVISE. PLEASE HELP.
I was just wondering if you could look at my Pressure Cooker. ? Where are you located
My genie pressure cooker is not building pressure anymore could you tell me about it?Thanks.
Hi can you help me as to why my pressure cooker lid is suddenly not fitting or locking onto to the pot please
I need a replacement gasket for Mirror 4 qt cooker it's 9". It's over 50 yrs old and can't see any model #. Everything I see use model # and not size of gasket. Help
Why steam is leaking from ceiling ring..the cooker is brand ne ..i bought 2 days back
My top is that seize,Are all pots like this the same seize?.
I lost my knot of imarflex. Its there any where I get get the spare parts.
How to fix if cooker not holding pressure or the heat is leaking at the handle?
My old Presto A304A cooker does not show replacement of ring here. Took me 2 1/2 days fiddling wiith it. Am about to try cooking with water to see if seals properly.
We need an update
I have a question for you and I am hoping you will answer it because I cannot find the answer anywhere else. I bought a pressure cooker gasket (rubber) and it says DO NOT USE WITH DELUXE PRESSURE cooker. Why is that?
Hi Geoff, and thanks for your question. I'm not totally sure why that would be, but the best answer I can give you is that the gasket may not properly fit the deluxe pressure cooker, or the deluxe pressure cooker may have a setting or capability that makes it incompatible with this gasket. If you have your pressure cooker's model number, I might be able to direct you to the correct gasket? Thanks again for you question
@@FIXTechGuides Hello there. Thanks for the quick response. This is what I bought from Amazon: Prestige PRDASP Deluxe Alpha Induction Base Pressure Pan, Senior, Stainless Steel (ASIM# B00QWPZ7GO). Your help would be greatly appreciated. The gasket fits well but it came with a red tag attached to it and the tag said DO NOT USE ON PRESTIGE DELUXE PRESSURE COOKER. It looks like a rubber gasket to me and it is quite indistinguishable from the original gasket I have.
Wher I can get sealing ring for 8ltr model 0409 vitavit
Where to order the pressure plug please ? Thanks
What is the brand and the model of this prusser cooker??
Thank you! Great help, honestly I had no clue about how to replace the overpressure plug. I just bought a replacement (afrer an explosion haha) and i was not sure if the overpessure plug had a “loose” fit or i had the wrong part number. Thanks!
i guess Im kind of off topic but do anyone know of a good place to stream new series online ?
Good day, can I buy the cover only of 24cm pressure cooker?
Pls how can I get the cover pot
Hello i would like to know if you have repair shop for pressure cooker here in nlNairobi, Kenya
Harden over time my eye. Hardens every season is how it is. Replaced this thing every year or two since I've owned. I should have kept the All American but It was getting heavy. I can put rye flour paste on the gasket and it seals, I guess that is what I will plan on doing every time I use it.
Z in
No handle repair guide!!! 😢
Do you have a hanabishi gasket or sealing 8 quqrtz
I need that sealing ring where do I get?
Thanks for the question. The part shown in this video can be found on our website here: www.fix.com/parts/pressure-cooker/presto/fix10468426/pressure-cooker-sealing-ring-overpressure-plug-pack-09936/. Make sure that you check your Pressure Cooker's model number to ensure you're picking up the right sealing ring!
Excellent presentation 👍🙏
Saan ba kami urder ng goma at ring bady
Great help for dummies like me. Thanks so much!
Not mine
I need to order the top
Excellent! Thank you!
You are welcome!
Daccan not remove without rubber.
The background music and narration gets uncomfortably loud at 0:41 :(
Urdu mean batao ,Eangeaz 14 August 1947 ko chaley gae
Thanks that was very helpful.
Thanks exellent
I am crying bz bought this pressure cooker last month it is waste of money
Well that was a total waste of time I thought this was about repairing the seal. Change the damn title instead of wasting a person's valuable time. Good god.
How to remove the RUSTED SCREW from a Presto Pressure cooker HANDLE?
you cannot repair rubber
you buy a new one, it is not repairable.
@@louisesanwogou4494 spray some wd-40 or other penetrant fluid and wait for 10 mins and try again.
0
Four
Fifty
Only reason I gave a thumbs down is because the video did not relate to what I needed in removing a very old old sealing ring.
Pls how can I get the cover pot