G503 Fuel Gauge Installation (Electric Part 22) Willys MB Ford GPW

Поделиться
HTML-код
  • Опубликовано: 9 сен 2024
  • Video showing the installation of the wiring from the fuel sending unit to the dash gauge.
    The sending unit does not care what voltage you are using, the fuel gauge must be the same voltage as the jeep.
    Parts can be purchased here
    www.rfjp.com/p...
    www.rfjp.com/s...
    in the UK
    www.joesmotorp...
    Part of the Team G503 Video Series on RUclips.
    All parts provided by and available for purchase at Ron Fitzpatrick Jeep Parts.
    www.RFJP.com/
  • Авто/МотоАвто/Мото

Комментарии • 18

  • @CSltz
    @CSltz 11 месяцев назад

    Glad that I found this. I need plenty of pictures and details. Mine was working fine then just stopped. Shows fill when it is. But then starts flickering back and forth with condensation builds up on the glass. Then it will just go to E. I am figuring ground some where. 1946 CJ 2A . Sorry that I found you so late.

  • @nikolakardonsky9108
    @nikolakardonsky9108 3 года назад +2

    thanks, great video!

  • @johnbradshaw354
    @johnbradshaw354 3 года назад +1

    Good clear instructional video. Thanks Scott.

    • @archiekevin8422
      @archiekevin8422 3 года назад

      i realize it's quite off topic but does anybody know a good website to stream newly released tv shows online?

    • @turnereverett2363
      @turnereverett2363 3 года назад

      @Archie Kevin flixportal :P

    • @archiekevin8422
      @archiekevin8422 3 года назад

      @Turner Everett Thank you, I signed up and it seems like they got a lot of movies there :) Appreciate it!!

    • @turnereverett2363
      @turnereverett2363 3 года назад

      @Archie Kevin happy to help :)

  • @2meterPeter.
    @2meterPeter. 3 года назад +1

    Thank you!!!

  • @edstransitscott9186
    @edstransitscott9186 3 года назад +1

    Great, good to know

  • @sithinstructor
    @sithinstructor 3 года назад

    Great video. My guage works when the engine is off. Pegs to full with engine running. I've checked ground on every single component on the Jeep. Twice. Disconnected and reinstalled the guage like 4 times... grr.

  • @charlestyson256
    @charlestyson256 2 года назад

    Great video. I have been following along in wiring my MB and this is extremely helpful. Am I missing something though? Can't find a video that links #10 Video (installing ignition switch) to #22, which would explain the routing and. connection of the A-7823 Harness, including where it routes through the firewall.

  • @luismalacalza705
    @luismalacalza705 3 года назад

    Gracias ,lamentablemente los relojes son de seis voy,y la gran mayoría están pasados a 12v ,cual es el problema el problema es q no hay réplicas un gran abraso

  • @gregnaro8620
    @gregnaro8620 2 года назад

    What amp circuit breaker did you use? The original wiring diagram shows it going from ignition to gauge.

  • @y2k4ed
    @y2k4ed 2 года назад

    What are the part numbers for the fuel gauge harness? Can regular wire with a heavily protected jacket be used?

  • @farside7803
    @farside7803 Год назад

    Is there a full bond strap video?

  • @CSltz
    @CSltz 4 месяца назад

    Will rewiring the fuel gauge help with these problems. Moisture on the inside of lens when running. Will show full but drops to empty with fuel still in it. Wiggles back and forth very quickly.? Any one interested in a 46 CJ2A with military trailer. Lots of extra parts.? $15,000.

  • @timlegois7115
    @timlegois7115 3 года назад

    I'd like to know who the lady in the Red dress is, with her leg's crossed, at Five minutes and 55 seconds into the video ?

    • @TeamG503
      @TeamG503  3 года назад

      That would be Mrs Schiller