500 полуляхов из 250ти! Номинант на премию Дарвина! Нет, победитель, безусловно победитель. Я даже не хочу думать что будет если закусит или пара зубьев полетит в лоб "изобретателю". Хотя можно было бы модернизировать, пилы должны вращаться в одну сторону, тогда ветки не будет закусывать, во вторых обязателен кожух.
@@БезКомпаса-щ8ю я не думаю, что он стал бы это даже повторять - тут не полуляхи, тут уже гигаляхи... обычный обдирочный диск на болгарку сделает из веточек опилки быстрее и безопаснее
WOW !! I just got done commenting on your single grinder video. This is really cool and I think has a LOT more potential. I'd love to see you try it with the blades off set from each other and with the 2 shafts closer together so that its chipping, chopping, cutting sooner with no chance of jamming. And of course a video with a chute attached and you just chucking branch's in and them gravity feeding and getting CHIPPED TO BITS !! I think you could just drill more holes an inch closer but it looks like there already so close to the edge that you would have to redo the spacing on one to get the blade overlapping and centered in between the opposing blades.. Hope you can find time to try it !! 👍
Hi, I am a gardener and I was looking for how to make myself a 50/60 mm diameter wood chipper with foliage. Well you just gave me the solution! good me I must be in terms (much more practical). but I think with a system of belts and pulley it should do the trick. 😉
colocar motores elétricos e fazer uma boca de entrada pra não ter perigo de acidentes fica ótimo! só uma dúvida, os disco giram pro mesmo lado cada conjunto
@@kokoilie You are technically right, but I really meant that when the wood is being pushed into the blades, the user is standing perpendicular to the pull action of the chipper, unlike a regular wood chipper where the user stands parallel to the chipper's pull action. This is why I think this design is one of the safest because the user is not in peril of being pulled accidentally into the blades.
It's a good concept, however, it needs upgrading to make it more safe. I also think that with a few years, you could make it operate with one motor instead of two.
Great idea, until you use it in the garden with branches laying on the ground and you trip...... That said, with a longish tubular(square/rectangular) shute/guard above the blades(and maybe a short slot on one side to use it like in the video) I would actually consider making this myself...
Что-то я посчитал стоимость 22 отрезных дисков, 4 подшипников и двух "болгарок", они же ушм... За эти деньги вполне можно прикупить промышленно изготовленный измельчитель... И "болгарку" на сдачу.
Не выходит 2 новые ушм 3000 + 700 диски + железо, ну ещё 500 , с приёмок. Итого 4.700 , а подшипники забыл, ну ещё 1200. 5.900 ну 6.000. А измельчитель?
Now upgrade it with a backplate and a Ramrod to push the minced what ever gets put through it out the funnel end, and maybe a cover for the top of it to minimize debris getting thrown everywhere but also to keep your hands attached and not minced.
Would also work as a feed chute -- can just drop a few branches at a time. I was thinking that there could be wider spacers such that the blades would overlap like a shredder.
All mulchers literally feed the branches vertically though their 3 in tubing. That's why only mainly leaves and thin branches go at the top but thicker branches go into the thinner cylinder. The concept is pretty similar.
Советую почитать фрезерные работы. Там режущую кромку инструмента пускают навстречу материалу. А при таком подходе мало того что не безопасно, так ещё и неконтролируемый захват материала может спровоцировать разрушение механизма.
L idée et très bonne, mais avec une démultiplication pour une rotation plus lente et des protections pour les protections il y aurait moyen de broyer un peut plus gros...
Hola me parece bi na solución pero por seguridad le pondría unas tapas para que no estén expuestas las cuchillas y solo dejando un orificio para poder meter las varas o el material que se desee triturar ... Gracias muy buenas noches
Congratulations brother. This is the best homemmade shredder than i see.
Thank you very much bro
This is bloody brilliant! I was talking to a friend about the concept and 12 hours later I came across this. Love it, love it, love it!
Thank you very much bro
This is gold for farmers.
Thanks dear
Друга уже нет
Very nice safety features! 👍
1. до 4мм садовый измельчитель
2. 5-10мм обычной циркуляркой по 5-10 см
3. остальное на дрова
видосу лайк: без воды, по делу, круто!
That thing is terrifying and I love it!!!
Thanku
Super thanks for posting this video it's very useful for me
Thank you very much dear
Hola maravilloso tu invento y esa misma servira para trituradora de plástico?
Looks like it would work great for shredding HDPE nice work.!
Thank you very much dear
Nice job!
Thank you! Cheers!
500 полуляхов из 250ти! Номинант на премию Дарвина! Нет, победитель, безусловно победитель. Я даже не хочу думать что будет если закусит или пара зубьев полетит в лоб "изобретателю". Хотя можно было бы модернизировать, пилы должны вращаться в одну сторону, тогда ветки не будет закусывать, во вторых обязателен кожух.
Доктору уже сообщили?)) Я бы посмотрел, с какими предосторожностями он это включал бы)
@@БезКомпаса-щ8ю я не думаю, что он стал бы это даже повторять - тут не полуляхи, тут уже гигаляхи... обычный обдирочный диск на болгарку сделает из веточек опилки быстрее и безопаснее
@@igor0874 про обдирочный тоже думал.
@@БезКомпаса-щ8ю он сделает "это" в увеличенных масштабах, из полноценной циркулярки!!
@@Ruslik89 хотел бы я посмотреть на это из другой галактики, чтоб иметь больше шансов не получить вентиляцию мозгов...)))
The safety precautions in mind are amazing. You make one mistake, it will be your last. I love it!
good build man...could you build a top entrance to the blades and see how it would work ?
Thanks for your suggestion
I'VE NEVER SEEN ANYTHING LIKE THIS BEFORE!
Sos un genio! Gracias por compartir la idea!!👍👍
Thank you very much man
Все гениальное просто.
Ты крут
Très interessant vraiment félicitation.Essayez de broyer de la paille???
WOW !! I just got done commenting on your single grinder video. This is really cool and I think has a LOT more potential. I'd love to see you try it with the blades off set from each other and with the 2 shafts closer together so that its chipping, chopping, cutting sooner with no chance of jamming. And of course a video with a chute attached and you just chucking branch's in and them gravity feeding and getting CHIPPED TO BITS !! I think you could just drill more holes an inch closer but it looks like there already so close to the edge that you would have to redo the spacing on one to get the blade overlapping and centered in between the opposing blades.. Hope you can find time to try it !! 👍
Ok man thank you
Hi, I am a gardener and I was looking for how to make myself a 50/60 mm diameter wood chipper with foliage. Well you just gave me the solution! good me I must be in terms (much more practical). but I think with a system of belts and pulley it should do the trick. 😉
Ok thank you sir
Amazing job!
Thank you!
Mantap betul 👍👍👍 saya dari Indonesia
Thank you very much❤❤
would love to see you build a funnel on the top to feed the chipper! very nice build!
Thank you
Excellent 👍
Simple, handy, light, portable & easy to modify & improve.
Thanks dear
Can you design and share a study on the design of a machine used to break and remove copper cables?
ΠΟΛΥ ΩΡΑΙΟ ΠΡΩΤΟΤΥΠΟ ΜΠΡΑΒΟ
NICE!! great for plastic too. proly even aluminum cans. :]
Thanku
colocar motores elétricos e fazer uma boca de entrada pra não ter perigo de acidentes fica ótimo!
só uma dúvida, os disco giram pro mesmo lado cada conjunto
Видео из разряда: "У меня есть две болгарки, я заставлю их страдать!"
250 полуляхов)
@@ЕвгенийПопов-ц1ы из 250 ти🤣
Две болгарки за стеной жалобно заныли.
😂
This seems like the safest wood chipper because the cutting action does not pull the wood into the blades. Great design!
Thanks bro
This is anything but safe! Its terrifying.
It does pull the wood in, that is why he's pushing it piece by piece instead of shoving it lengthwise.
@@kokoilie You are technically right, but I really meant that when the wood is being pushed into the blades, the user is standing perpendicular to the pull action of the chipper, unlike a regular wood chipper where the user stands parallel to the chipper's pull action. This is why I think this design is one of the safest because the user is not in peril of being pulled accidentally into the blades.
Very Nice
Thanks bro
great build
Thanks
wow that nice good work
Thanks bro
Do you think this could work for receyling plastics?
Nice video
Thanks bro
Great idea! I think one angle grinder will do the job. one wheel with the grinder is the driving and the other is driven. have you tried it?
Thanks for your suggestion bro
Excellent presentation 👍
Thank you very much bro
Как идея супер! Сделать станину и защитный кожух это уже не очень сложно.
Simples e funcional, Parabéns ótimo trabalho!✌
Thanks man
What brand is that green cutting disc? Gratitude
Can this one shred plastic and paper
Looks safe and effective
Real safe. LMAO . There goes some fingers or arm.
Very nice
Thanks man
I really like your creative ideas. great tips
Thanks bro
Wow amazing 🤩 thanks my friend
Thank you man
Bravo super interesant
Thanks
Send like a fun thing to fall on.
Great video 👍
Thanks bro
Beautiful job well done my friend
Thanks dear
Bro intha video really good big saw blade try Pani parunga angel grinder set aagathu nu nenakuran vera eathavathu motor use Pani parunga
Ok bro
Nice, just make a hopper above for safety and a collection bag beneath for convenience in collecting the shredded biomass
Thanks for your suggestion
It's a good concept, however, it needs upgrading to make it more safe.
I also think that with a few years, you could make it operate with one motor instead of two.
Ok thanks for your suggestion bro
Ever priced gears, I did they want like $1500 each. almost impossible to find!
200th like here
Love you videos you make
Thank you very much bro
@@DiamleonDiyBuilds keep up the contents like this and thank you for this DIY videos I'm glad to follow your channel
😊😊 Thanks bro
hello, nice build!, I want to ask what size is the pillow block that you are using? and how big is the shaft? I want to make one for myself
Thank you. Pillow block= 20mm and shaft diameter= 20mm
درود به تو هنرمند 🌹🙋
Is this part of a bigger build.
What cutting disc you using? Seems to get a lot of use out of them 😂
tam bir canavar oldu. harika
Я столько дисков в магазине не видел 😎
Interessante 💪🏼
Thank you❤
Nice
Thanks
can i ask is that possible to change the grinder with 2 motor ?
Yes possible
Make a plastic shredder. The 3D printing community needs a cheap solution.
ActionBox makes one. Not cheap XD
Is it suitable for making feed for poultry?
Looking forward for upgrades
Great build if you have several used blades. Otherwise it will be more expensive than just buying a chipper.
Ok thank you dear
Me funcionará para moler prácticos?
Saya sangat menginginkan mesin penghancur seperti itu,. Di mana saya bisa mendapatkan?
Sorry bro I'm not selling it
At 6:13 I thought you should bolt it so it can be disassembled... and a few seconds later I saw the welding sparks.
Great idea, until you use it in the garden with branches laying on the ground and you trip......
That said, with a longish tubular(square/rectangular) shute/guard above the blades(and maybe a short slot on one side to use it like in the video) I would actually consider making this myself...
Ok thanks bro
Приемную воронку надо приварить, очень опасный агрегат получился.
Само собой.
Nice. Of you use drills instead maybe you can control that speed,and a protective box
Thanks for your suggestion
Что-то я посчитал стоимость 22 отрезных дисков, 4 подшипников и двух "болгарок", они же ушм... За эти деньги вполне можно прикупить промышленно изготовленный измельчитель... И "болгарку" на сдачу.
Не выходит 2 новые ушм 3000 + 700 диски + железо, ну ещё 500 , с приёмок. Итого 4.700 , а подшипники забыл, ну ещё 1200. 5.900 ну 6.000. А измельчитель?
От 4.000 до 11.000 но кайф не тот.
@@AS1234AN если есть желание поиграть, то почему бы и да))
И ещё забыл прибавить потраченное время на сборку агрегата. Ведь время - деньги.
@@AS1234AN дювельт за полтора килорубля? Да, и дисков у него не 2 а 20
@@ЕвгенийЛип-й6ю читай внимательно. Две новые ушм. Цифры в Украинской гривне, если что.
Напрямок різання правильний? А якщо попадеться щось твердіше? зупиниться одразу і щось вирве..
Qual a marca desse disco de corte verde..?? Gratidão
Excellent job ! Impressive and inspiring.
Thanks man
Now upgrade it with a backplate and a Ramrod to push the minced what ever gets put through it out the funnel end, and maybe a cover for the top of it to minimize debris getting thrown everywhere but also to keep your hands attached and not minced.
Ok thanks for your idea
Would also work as a feed chute -- can just drop a few branches at a time. I was thinking that there could be wider spacers such that the blades would overlap like a shredder.
I think there would be trouble if you fed the branch vertically, hence why he keeps it horizontal.
All mulchers literally feed the branches vertically though their 3 in tubing. That's why only mainly leaves and thin branches go at the top but thicker branches go into the thinner cylinder. The concept is pretty similar.
Indonesia hadirr
Maravilha ❤
Ооу щит, вотафак🎉 Едрёнбатон😮
Excellent, but unfinished work. Because your middle name is Danger of course 😅😅
very nice build. what happens when you put a hand in there?
Well , you're disabled for the rest of your life
awesome. Could use a funnel though.
Ok thanks for your suggestion
Даже просмотр этого видео опасен для жизни.
Советую почитать фрезерные работы. Там режущую кромку инструмента пускают навстречу материалу. А при таком подходе мало того что не безопасно, так ещё и неконтролируемый захват материала может спровоцировать разрушение механизма.
Выглядит очень безопасно и надёжно😂
580 тыс просмотров, знаете какой ориентировочный выхлоп? А вы про надежность..)))
Да уж.
good idea.
Thanks dear
Excellent would you please show us in 3d in daimeter +- 150
Thanks regards
Sorry bro I'm not having the design plan for this
فكرة رائعة
Mantap bos q
Thanks boss❤
Tylko frajezy pracują boszem bez osłony grozi to kalectwem lub śmiercią znam dwa takie przypadkiem jednego byłem na otrznym świadkiem totalny szok.
Muy bien, 👍
Thanks man
Works insanely fast. One branch in 20 seconds with fast play speed.
We can cruss coconut pils
Super junius👍👍👍👍😲🤝🤝🤝🤝🇮🇩🇮🇩🇮🇩🇮🇩indonesia
Thanks dude
Alguien sabe o probo si funciona para picar plástico?
That's awesome...ly terrifying! Lol
L idée et très bonne, mais avec une démultiplication pour une rotation plus lente et des protections pour les protections il y aurait moyen de broyer un peut plus gros...
W
Safe 100%
Hola me parece bi na solución pero por seguridad le pondría unas tapas para que no estén expuestas las cuchillas y solo dejando un orificio para poder meter las varas o el material que se desee triturar ... Gracias muy buenas noches
That is just terrifying