I've had some people tell me that the 281C wasn't recalled. Only the A and B models. Regardless after trying a few I've found that none of them would work on the fixed temp side. I don't give our customers a choice. If they have any 281s or 283s they get replaced or they don't get my signature.
I found it’s easier to dispense the special liquid if you put it in a super soaker water gun. If there is no available flame, stick a match on the end. I am the king of water fights now in my neighborhood lmao.
My dads grill almost exploded yesterday and the thumbnail looks like the inside of the grill when we opened it. Good thing I knew where the fire extinguisher was. Great video!
The opportunity to get rid of them is kind of over my school district that I work in is aware of the recall but they have been left as there was not the manpower to replace all of the devices during the period of the recall where it was covered for new devices something along the lines of there was a brief period where they would cover the cost of replacing them but that window is gone so now they just are left and get replaced when they are found to not work during testing might be a similar situation for you not sure
Was the initial alarm caused by heat or your special juice shorting the wires on top of device? Just an observation. May be flipping it over with terminals pointing down would be more precise test?
6:13 The EST Genesis Is the EXACT Same Alarm That i have in my school along side A Edwards/Potter Evax Set To (i could be wrong about this) The Default Message (There has been a report of an emergency) with Whoop Tone as Well as a EST 2 (Possibly EST 3) With Dual Action 276B-1110's
Hey guy, I had one of these, and it set off randomly not long after installing it (actually it was like 10 mins) and then the solder just broke and set if off
I am surprised when u added more and the wire was burned that it still set off 🤣😂. And at 7:40 u made a flamethrower and id imagine u say "I HAVE THE POWER"
@@nics-systems-electric At the school I work at has these detectors and when I said something about it to the district they said that they were fine and did not need to be replaced
Well I can see why its recalled by the detector being a bon fire now and it still wont go off lmao. Special liquid is ~~gasoline?!?!?~~ This test also demonstrates how fire alarm wire will work when being burnt
Yes it was gasoline any other type of wire would’ve actually perform the same way in this test as the copper all has the same melting temperature the insulation temperature is slightly higher at 105° instead of 90° however I think the fire was hotter than both of those so fire alarm wire would still work as usual for slightly longer but once past the temperature the insulation will no longer be an insulator Which is most likely why Horn strobe went off and on because of the insulation being melted leaving the copper conductors to make contact with each other
Why not setup a fire beneath the detector instead of lighting the detector on fire? Would have been a better video with a heat gun and an infrared thermometer to gauge when the detector went into alarm. This reminds me of a Beavis and Butthead video.
You do understand that he did that with a heat torch and it heated past the alarming point. The detector didn’t even activate, it was just the wires melting together
Whenever My boss says we shouldn’t replace these again, I’m showing him this video lol
I've had some people tell me that the 281C wasn't recalled. Only the A and B models. Regardless after trying a few I've found that none of them would work on the fixed temp side.
I don't give our customers a choice. If they have any 281s or 283s they get replaced or they don't get my signature.
That was epic!! “Needs more special liquid” 😂
i never knew about the recall, Nice test.
That’s a good thing edwards recalled those heat detectors
I hope our President gets recalled along with it as he looks like a burned out detector.
@@kylehill3643 dude why politics on a fire alarm video
@@kylehill3643 lmao
@@kylehill3643 agreed
Hello bro!! Really cool video test!! Special liquid that's funny!! Be safe and have fun!! ...
Good informative test...nice special liquid 😂😂 I have to remember this special liquid the next time I set a fake BG-12 on fire
For sure lol
I found it’s easier to dispense the special liquid if you put it in a super soaker water gun. If there is no available flame, stick a match on the end. I am the king of water fights now in my neighborhood lmao.
Please tell me what the special liquid is, is it smoke detector tester or is it something else?
nice test and nice video
My dads grill almost exploded yesterday and the thumbnail looks like the inside of the grill when we opened it. Good thing I knew where the fire extinguisher was. Great video!
Was there a heat detector in it?
@@kylehill3643 lmao!🤣
Thank you for this video. Now I will tell my management to get rid of those detectors!
The opportunity to get rid of them is kind of over my school district that I work in is aware of the recall but they have been left as there was not the manpower to replace all of the devices during the period of the recall where it was covered for new devices something along the lines of there was a brief period where they would cover the cost of replacing them but that window is gone so now they just are left and get replaced when they are found to not work during testing might be a similar situation for you not sure
Finally! Someone tested it!!
this man just lit up his whole thing im lost- AND THEN HE TOOK THE ELON MUSK FLAME THROWER BRO IM LIKE SO AMAZDD
You just didn’t want to stop lmao
I could’ve kept going forever lol
Was the initial alarm caused by heat or your special juice shorting the wires on top of device? Just an observation. May be flipping it over with terminals pointing down would be more precise test?
That genesis is lucky to be alive. 🤣
6:13 The EST Genesis Is the EXACT Same Alarm That i have in my school along side A Edwards/Potter Evax Set To (i could be wrong about this) The Default Message (There has been a report of an emergency) with Whoop Tone as Well as a EST 2 (Possibly EST 3) With Dual Action 276B-1110's
Hey guy, I had one of these, and it set off randomly not long after installing it (actually it was like 10 mins) and then the solder just broke and set if off
Epic video ! How satisfying watching a heat detector burn lmao
Great video!
Nice job EST. 🤦♂️🤦♂️🤦♂️
That is one stubborn detector
I am surprised when u added more and the wire was burned that it still set off 🤣😂. And at 7:40 u made a flamethrower and id imagine u say "I HAVE THE POWER"
Imao special water is Ron 95 fuel or alcohol
Shouldn't have the disk have flown off like within 30 seconds to a minute? And what was that "Special Liquid" that you were using?
4:08 It finally went off
No wonder it was recalled, it practically has to be already burning in order to sound the system.
Oh cool, another Canadian that likes fire alarms.
What I want to know is how your fire-breathing dragon hasn't burned the entire plank of wood, popping the batteries and setting the Genesis on fire.
And this is why I prefer the system sensor heat detectors
Very cool video but sad this device doesn’t work like it should. And there is a bunch of these at my work but I’m not sure same model.
Toasty heat detector. That special liquid sure burned it.
This looks like the USA after mixing different incompatible brands of government together and throwing the switch to see what happens!
“DO NOT PAINT”
So in other words, it does work, but only if the building is already burning down
Just the fixed temp
Who is the best way to test it with a hair dryer.
Cool
Bro I like your video, but you are daring playing with fire😂🤣
You should see me actually play with fire it’s a lot better than this
@@nics-systems-electric “hey guys pickle 700 here today I’m going to nuke my garage with a can of gas and a torch”
@@FireAlarmDude5967really?????????????????????
Electrician has joined the chat.
Edwards recalled heat detector has left the chat.
and grounds and bilding says they don't need to be replaced
Sorry I don't understand the comment
@@nics-systems-electric
At the school I work at has these detectors and when I said something about it to the district they said that they were fine and did not need to be replaced
@@codythedogyoutuber the recall replacement window is gone, however they are still a recalled device you can research it on the Edwards website.
This is what I like to see
Were you prepared to almost set the genesis on fire ?😅
If it did it did it never really came that close though it always was about a foot and a half away
So this should be an edwards heat detector durability test
Did you keep the est genesis fire alarm?
Yes it's still around
Did you buy this recently?
(No fire alarms and EST Genesis are hurt in the making on this video.)
No as I said in the video I took it from a school I was testing at
@@nics-systems-electric least the Genesis is not hurt in the video.
@@relevanteaglealarms109 I mean it’s a fire alarm it could really only be damaged not hurt
I think that detector loved special liquid 😂😂😂😂
7:42 Lmao
Why is that not considered a life safety device if it’s on a life safety system?
Fire alarm systems are also for property protection
I'd say you can stick a fork in that heat detector cause it's done like dinner!
Oh so dont point the hair dryer at the thing
That disk didn't even come off! It's that bad?
I think so
@@nics-systems-electric I can't wait :) I always laugh my head off at those durability testing videos of yours 🤣🤣🤣
Well I can see why its recalled by the detector being a bon fire now and it still wont go off lmao.
Special liquid is ~~gasoline?!?!?~~
This test also demonstrates how fire alarm wire will work when being burnt
Yes it was gasoline any other type of wire would’ve actually perform the same way in this test as the copper all has the same melting temperature the insulation temperature is slightly higher at 105° instead of 90° however I think the fire was hotter than both of those so fire alarm wire would still work as usual for slightly longer but once past the temperature the insulation will no longer be an insulator Which is most likely why Horn strobe went off and on because of the insulation being melted leaving the copper conductors to make contact with each other
@@nics-systems-electric That makes sense.
What is the case of the heat detector itself made of?
Thin steel
@@nics-systems-electric No wonder that didn’t burn, but I guess in a large structure fire it could melt.
have you heard a 9838 horn go off or any older stuff
No
@@nics-systems-electric you will one day
@@vintagesimplexfirealarmsof6440 Probably not we don’t have mechanical horns in Canada very much
@@nics-systems-electric come to New York lol there plenty of them
What does “Not a life safety device” mean on the heat detector
It means it can’t be used as a device for human or life safety just for property protection
Edwards put it on there just in case they had to have a massive recall (wink wink) lol
It's probably a good thing you took this thing out of a school if it took it actually being on fire to set it off. 🤣
the 282B and 284B were not recalled.
Remember kids, Don’t play with fire it is very dangerous
But we need to burn more heat detectors!!!!
True, true@@kylehill3643
is that special liquid kerosene?
gasoline
@@nics-systems-electric lol!
I have est genesis g1 vm
next burn a system sensor l series
Buy me one and I'll do it
@@nics-systems-electric I have one but how would I send it to you?
Why not setup a fire beneath the detector instead of lighting the detector on fire? Would have been a better video with a heat gun and an infrared thermometer to gauge when the detector went into alarm. This reminds me of a Beavis and Butthead video.
You do understand that he did that with a heat torch and it heated past the alarming point. The detector didn’t even activate, it was just the wires melting together
edward genesis almost got burned up there
Best thing that could happen to EST
I know right
That poor detector
All those detectors need to be gone
What did ur mom say about the fire and the flamethrower lol
Just looked out the window for a couple seconds and then went back to bed lol
He probably did it and cleaned up the mess when they weren't home
@@nics-systems-electric xD
Gotta "love" EST and their "great" quality! NOT!