I've been using Fusion 360 for 8 years now, started with Solid Design, where everyone does, then at Manufacture workspace with 5 Axis and additive, then Electrnics, then Surface Design, now on Form Design and Generative. I can say I am really advanced but not an expert. And watching this Gentleman's workflow, it is simple and beautiful. Thumbs up and subbed!
Thanks. I have a job coming up where I will need to mill such a slot in a pipe on my cnc milling machine. I was thinking of modeling using the coil function but this is way quicker. Silly of me not to think of it because I use emboss for putting serial numbers on 3D resin printed parts I make. :)
Thank you for this great video. I need to modify a motorcycle gear box shift drum slot I have no idea how to create & modify this slot that changes direction "a few times" Your help would be greatly appreciated
Dude, i need to do that but the point at the start and the end of the hole in the cylinder must be at 180º degrees... In your video the hole dont do a half spin... How can i solve this?? Thanks for the video btw is very usefull
CAM isn't really my specialty unfortunately. I primarily focus on the 3D design aspect of things. I would however recommend you take a look at this channel as they specialize in CNC. www.youtube.com/@nyccnc
Outstanding, short and clear, and to the point... Educational overall ✊🏿
Thank you for your support!
Very helpful! Thank you
Short, clear and instructive !!!!
As usual, very good video ! Can't wait for the next one 👍
Thanks a lot !!!!!
Thanks again!
I've been using Fusion 360 for 8 years now, started with Solid Design, where everyone does, then at Manufacture workspace with 5 Axis and additive, then Electrnics, then Surface Design, now on Form Design and Generative. I can say I am really advanced but not an expert. And watching this Gentleman's workflow, it is simple and beautiful. Thumbs up and subbed!
Thank you very much for your support!
I watched a lot of videos on this subject for my project. My search ended here. Thank you.
You are very much welcome. Glad I could help!
Thanks. I have a job coming up where I will need to mill such a slot in a pipe on my cnc milling machine. I was thinking of modeling using the coil function but this is way quicker. Silly of me not to think of it because I use emboss for putting serial numbers on 3D resin printed parts I make. :)
Too good to be true!! Thank you so much! :D
You're so welcome!
Thank you for this great video.
I need to modify a motorcycle gear box shift drum slot
I have no idea how to create & modify this slot that changes direction "a few times"
Your help would be greatly appreciated
Do you have a diagram or photo of what you currently have and what you want the final product to look like?
@@CADJungle - thanks for your reply. I found a detailed / full video on this subject ( Fusion 360 Cylindrical cam)
Great! I'm glad you found a solution! Always here to help!
Dude, i need to do that but the point at the start and the end of the hole in the cylinder must be at 180º degrees... In your video the hole dont do a half spin... How can i solve this?? Thanks for the video btw is very usefull
👍👍👍👍
Could you help with CAM for this slot on a regular 3 axis mill?
CAM isn't really my specialty unfortunately. I primarily focus on the 3D design aspect of things. I would however recommend you take a look at this channel as they specialize in CNC. www.youtube.com/@nyccnc