Hey man I appreciate you. I got a 2014 corolla got same kinda bent fender,door fine and also the hood and bumper got a scratch. I never would have know how to take that stuff off to get to those hidden bolts. I can see em on the new fender I bought. I was also worried about the bumper panel and how it came off. Thanks again. I sub and I am grateful for the vid.
I think you are referring to the bumper retainer/bracket. Or, the black boomerang piece below the fender nose. That is secured by bolts, I believe 2 10mm. A socket wrench will take those right off. Thank you for watching!
I will add the link for the fender removal. It shows how to take off 90% of the fender liner. We did not remove it for the video bc it's not needed. But, there are a a couple pins or screws that hold the liner to the frame further back behind the tire. If you remove those the liner comes off. ruclips.net/video/UyBlei_MO_4/видео.html
@@daeron767 Hello! The fender liner is separate from the fender. You can see us remove a few push pins and screws. There is usually no more than a handful of them. You can use a panel clip removal tool or a flat-head screwdriver to pop them out. Please let us know if you have any questions.
Hello, I have the same Corolla. My wife bumped a parking space stopper and now I believe I need to replace the bumper retainer on the car. The retainer isn't holding the bumper cover in place anymore. Before I go tearing it apart, kinda want to know how much time I need to set aside. Can i take the retainer off without removing the fender? If you reply, thank you in advance.
You do not have to remove the fender, you can just take off the bumper retainer. If the bumper isn't holding, you could probably do it in less than 1 hour. The bumper retainer has 2-3 bolts/screws holding it to the fender. It should be fairly quick, just reattach the bumper. Thanks for watching and good luck!
Thank you for watching our video. We really hope this helps you out. Please let us know if you have any questions. Where to buy: bit.ly/14CorollaFender Visit us below if you need any other painted auto parts: www.revemoto.com
Thank you. I believe the footage was corrupted but we only disconnected lining from the fender. I think around 6-7 clips around the liner and 2 bolts on the edges. Thanks again for watching!
what would you do if the front of the fender was too low for the hood and short to the headlight (slightly larger gap from headlight to fender compared to other side). Would you look at the fender bracket that is just above the headlight retainer, if not what would cause it? I have a Yaris and similar shaped fender. Great vid btw.
Hello. Spacing issues can be fixed by adjusting the bolts and pushing the fender towards the door or headlight. It also depends on the damage. It seems like the gap between fender and hood too close? If I understood correctly. I would move the fender forward towards the light. I would also check the headlight and hood are correctly installed. Thank you for watching!
Hi Sara, yes it will be the same. This will actually work for 2014-2019 Toyota Corolla models. Let us know once you're able to do it yourself. We'd also love to hear to improve our videos. Thanks for watching!
You just have to find the bolts and clips and remove them. It's very similar to this model Corolla. Most the screws will be along the outer edge of the fender. You can use a flat-head screw driver to pop out the push pins. Use a ratchet set to take the small bolts out. Lastly, there may be some bolts on the corner of the bottom bumper.
Hello and the fender we is an aftermarket fender. Actually, I think the one we took off was also an aftermarket fender. We guarantee fitment and color match on all our parts. Thanks for watching!
Hello Elizabeth! You can follow this link bit.ly/14CorollaFender for the fender. Feel free to chat with our staff if you have any questions about the color or fender. Thanks for watching!
Hey man I appreciate you. I got a 2014 corolla got same kinda bent fender,door fine and also the hood and bumper got a scratch. I never would have know how to take that stuff off to get to those hidden bolts. I can see em on the new fender I bought. I was also worried about the bumper panel and how it came off. Thanks again. I sub and I am grateful for the vid.
Aww man super happy that this video helped you out. Thank you for the sub. If you need parts for your car go to www.ReveMoto.com
Good instruction but missing how to remove connector to bumper.
I think you are referring to the bumper retainer/bracket. Or, the black boomerang piece below the fender nose. That is secured by bolts, I believe 2 10mm. A socket wrench will take those right off. Thank you for watching!
YO THOSE ARE MY RIMS!!!!!
Those are pretty cool rims.
The fender liner looks torn. Appreciate if you could make a video on how to replace that as well. Subscribed.
I will add the link for the fender removal. It shows how to take off 90% of the fender liner. We did not remove it for the video bc it's not needed. But, there are a a couple pins or screws that hold the liner to the frame further back behind the tire. If you remove those the liner comes off. ruclips.net/video/UyBlei_MO_4/видео.html
@@ReveMoto What pins &/or screws &/or brackets? If you have to replace a liner it comes by itself.
@@daeron767 Hello! The fender liner is separate from the fender. You can see us remove a few push pins and screws. There is usually no more than a handful of them. You can use a panel clip removal tool or a flat-head screwdriver to pop them out. Please let us know if you have any questions.
Hello, I have the same Corolla. My wife bumped a parking space stopper and now I believe I need to replace the bumper retainer on the car. The retainer isn't holding the bumper cover in place anymore. Before I go tearing it apart, kinda want to know how much time I need to set aside. Can i take the retainer off without removing the fender? If you reply, thank you in advance.
You do not have to remove the fender, you can just take off the bumper retainer. If the bumper isn't holding, you could probably do it in less than 1 hour. The bumper retainer has 2-3 bolts/screws holding it to the fender. It should be fairly quick, just reattach the bumper. Thanks for watching and good luck!
Thank you for watching our video. We really hope this helps you out. Please let us know if you have any questions.
Where to buy: bit.ly/14CorollaFender
Visit us below if you need any other painted auto parts:
www.revemoto.com
Good effort,inner lining installation part of video is missing ,Good job though.Thanks.
Thank you. I believe the footage was corrupted but we only disconnected lining from the fender. I think around 6-7 clips around the liner and 2 bolts on the edges. Thanks again for watching!
what would you do if the front of the fender was too low for the hood and short to the headlight (slightly larger gap from headlight to fender compared to other side). Would you look at the fender bracket that is just above the headlight retainer, if not what would cause it? I have a Yaris and similar shaped fender. Great vid btw.
Hello. Spacing issues can be fixed by adjusting the bolts and pushing the fender towards the door or headlight. It also depends on the damage. It seems like the gap between fender and hood too close? If I understood correctly. I would move the fender forward towards the light. I would also check the headlight and hood are correctly installed. Thank you for watching!
Maybe that fender wouldn't have gotten smashed if the car didn't have bald tires.
LOL, no, probably not.
I've got new tires, and have the EXACT same damage. Mine was done sitting still in a driveway. Had nothing to do with the tires. Just careless.
hahaha, I was tripping on those bald tires, too
Hey I have a 2017 Toyota Corolla I was wondering if I replaced the fender on the driver side would I have to do this the same way?
Hi Sara, yes it will be the same. This will actually work for 2014-2019 Toyota Corolla models. Let us know once you're able to do it yourself. We'd also love to hear to improve our videos. Thanks for watching!
Good job
Thank you so much! We're glad we can help.
Yo I have a 2016 Toyota Corolla how do I replaced my fender liner
You just have to find the bolts and clips and remove them. It's very similar to this model Corolla. Most the screws will be along the outer edge of the fender. You can use a flat-head screw driver to pop out the push pins. Use a ratchet set to take the small bolts out. Lastly, there may be some bolts on the corner of the bottom bumper.
This fender from oem toyota or after market. Can you let me know what branch this fender?
Hello and the fender we is an aftermarket fender. Actually, I think the one we took off was also an aftermarket fender. We guarantee fitment and color match on all our parts. Thanks for watching!
I just bought from Toyota $296 but need to paint to match my color. Thanks for information.
Where can I buy the fender?
Hello Elizabeth! You can follow this link bit.ly/14CorollaFender for the fender. Feel free to chat with our staff if you have any questions about the color or fender. Thanks for watching!