You should see my Mustangs dash. Mind you i bought it Roadkill style from the junkyard and drove it home but god damn them people didnt know how to remove a dash.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋 I will accompany, and make you happy💋🥰 #ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). . !💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
You should put a lapel mic on Isaiah, so he's always in perfect audio. This would give you several major advantages. When Isaiah says something we'll be able to hear him better. When Isaiah says something dumb you can use editing software to isolate what he said and remove it. You can also edit together an independent video of just shit he says.
Thirded ^... he has no self edit function, but but I want to be able to hear when he's explaining things. Isaiah's such a find, Rob.. that said when you are front and centre you need not to be upstaged.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋 I will accompany, and make you happy💋🥰 #ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). . !💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
Plug coolant holes and fill with muratic acid. That’s how we clean out mineralized cooling passages in boat motors at the marina I work at. Leave it in over night then flush with water the next day. It works wonders
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋 I will accompany, and make you happy💋🥰 #ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). . !💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋 I will accompany, and make you happy💋🥰 #ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). . !💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
This to me looks like it was straight water ran (probably not even distilled) and just years of electrolysis from the dissimilar metals of the housings and irons. This almost certainly would have had a coolant seal failure. I'd definitely want to measure the land between the water jacket and seal groove to make sure there is enough material left. They can sometimes be deceiving there they look sufficiently thick, but are just full of pitting and will crumble at looking at them wrong. For lights I recommend the Snap-On Necklamps, you can wear it around your neck (as the name) or on your head, plus they're super bright.
I've been using the Snap-On Project (ECPRA072GR) light and really like it. USB-C, no modes to flip through, just on/off, adjustable brightness (long press on power button) and adjustable base and a darn strong magnet. I left this under a customer vehicle and they took it off and brought it back once they drove to their facility.
Just have to say this is by far my favorite RUclips channel. Not everything is perfect and yet, that’s what makes it perfect. Just three guys getting shit done in a shop with Rob, putting his own money into something he is so passionate about. Keep up the great work guys. Almost at a million subs.
There are no freeze plugs in the rotor housings under the lower intake manifold from the factory. The front rotor is blocked by the lower intake and the rear feeds the stock coolant line for the turbo. It is best to install 20mm freeze plugs in both holes. That way you don't heat the lower intake manifold unnecessarily with hot coolant in the rear housing. The top coolant outlet on the rear iron that was plugged (and then broken off) is the preferred spot to use for feeding coolant to the turbo, I wouldn't plug it.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋 I will accompany, and make you happy💋🥰 #ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). . !💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
@@nooboftheyear7170 learned that easy buying my rx8. Thought I was in good hands knowing the guy had owned rotaries for 30 years. I've found missing bolts holding my trans and starter on, all sorts of hack job electrical stuff around the downstream O2 sensor and a "my buddy's got a welder" cat replacement. Only good thing he did was keep the rust off the chassis 😂
Luckily Mazda still sells brand new dashboard vents for the windshield and the other smaller vents. Mine crumbled as well in my Turbo II when I removed my dash several months ago.
50,000 more subscribers Rob! Here's an early congratulations! Thanks for all the entertainment you have provided us over the years. We appreciate everything you do for the rotary community.
Yo Rob! I don't usually post a comments on videos but this video man...it didn't feel like I was watching a 50 minute video. At most! 20 minutes. Keep up the grind man! Been watching since 2018
You probably know this but it might help someone. Around 6 years ago I got a set of rotors for my 13b and they are polished with a buffer wheel, I have rebuilt the engine after 4 years of running and there was hardly any carbon in the engine stuck to the rotors. Any carbon left on the rotors wiped off with a paper towel. Maybe a nice machined rotor face could do the same.
Is it just me or does anyone else see rob just building the ultimate Mazda rotary collection in my opinion all he needs to build after this is an RX3 and eunos cosmo and then he’s basically got the perfect rotary collection
I have been watching the show for over 2 years now, and I can clearly say that I really enjoy it every time I see a new video I am very excited. The longer it is, the longer I will enjoy it. Thanks for all the good videos. From a French fan.
Love that Marty, Moog and yourself are in touch, literally my 2 favourite RUclips channels/guys in communications.. Imagine if Colin Furze gets involved lol... Massive appreciation for all of you 🙏🙏🙏🙏
That gauge is a classic, most widebands had a narrowband output, that would convert the 5 or 3v to 1v and would display the ratio perfectly on that autometer gauge.
So for good shop lights, just hop on a snapon truck, ask for the specs on the light you like, somehow make it off the truck without buying anything, check the price on that light online and make sure it’s a good price, and you’ll be set. It’s like some brand called streamlight and the snapon guy will give you a lifetime warranty on it. Those lights are friggen tough. One of my coworkers had one run over by a trucks 6 times before it broke. Super bright and grab some rechargeable batteries and you’re set. The little pen light only cost like 40. I know this sounds like an add of some sort but as a mechanic this light was way better than any other autozone light.
Streamlight is trash, I went through half a dozen in one year, not even dropping them. Switches all give out. Atleast I got them all on warranty, Snap On now carries Coast. Much better quality with those. I personally love Snap-On's neck light, it IS crazy fucking expensive for a flash light, but its so handy and they're bright AF.
i really appreciate the detail regarding the thread type and size of the various oil and water lines and sensor ports on the housings, i didn't realize that some were a straight metric thread without a taper, and requiring an o- ring or other perhaps a copper washer like fuel or brake lines
Rob! You should dry ice clean the whole underside of the car. Would be a game changer for that OEM++ look! Matt from Obsessed Garage distributes them now. TommyFyeah is also using the same machine.
I have a 86 NA sports and its on 87000 km (54k miles) stock untouched motor. It sat for 10-15 years, a year before I brought it and when I had it I only drove it every weekend or so. It ran perfectly no issues but when I first got it the coolant system looked disgusting so I drained it flushed and thought it was good to go. Had the car serviced just so I could get it checked over for any issues I need to address. The following weekend after the service I started it up and let it warm up in the driveway and then when backing out of the driveway there was coolant everywhere (Waterpump leaking from the weep hole) so I replaced the water pump and went to start it and had trouble starting it. Tried a couple basic things and nothing worked so sent it back to the shop to be looked at and that’s when I was told it’s lost comp on both rotors. 25 psi all around and 28 on one face of one of the rotors. This baffled me as from my understanding, for what seemed to be a healthy engine with not even a single issue. To lose comp on both rotors seemingly out of no where is just wrong. But after seeing this video I’m wondering if it’s because it spent most of its life sitting being on only 87000 km (54k miles)I’ve got a couple things I’ve been told I could try to start it but if none work I’m thinking of pulling it out myself and rebuilding it myself as I don’t have much money and learning to build engines especially rotary is my dream. I should note I’ve never done an engine rebuild before so I’ll be taking an extreme amount of time to get it perfectly and educating myself before trying anything. Your videos will be extremely helpful. But yeah if anyone’s got any feedback on any of that it’d be much appreciated as I’ve got no clue what happened and neither does anyone I’ve talked to so far : /
@@FappinSteve I know, right? Awful fucking name. Imagine only having 4 unique letters in your name. It's like they wanted a symmetrical name, but couldn't finish writing the C at the end.
all of the blockage is the aluminum reacting to coolant setting in the block . even if it was freshly rebuilt just setting for 10 years would do that luckily now we have coolant that will protect the aluminum from getting that bad .it was a damn good idea to have taken the block down it would have died if you had run it like that .
The fittings+orings (at 31:30) you mention being rated to "2000 psi or something" are actually rated to 3000 psi. I make fire suppression systems and the fittings we use look identical to yours, and are pressurized to 3000 psi every time in order to pass DOT spec. Your fittings are comfortable up to 3000 psi at the very minimum
Rob, would it be possible to get even a short video going over where each car is at, current plans/goals with the car, and if we can expect any upcoming content on the car? Curious what we'll see from the 4 rotor FD next, and when we can expect a 6 rotor lambo! Cheers.
7:35 [I'm looking for a good shop light] A pair of Milwaukee Underbody Lights #2126 are great for working under vehicles. Their Underhood light #2125 is also cool as an area type light. The Astro 40SL and 72SL are also handy especially when there's something nearby to stick their magnetic base to.
Where i work we use headlamps all the time, it looks dumb but after you use it a week you dont want something else. It is something like the ledlenser MH10. Light in the front, 1 elastic band and battery at the back.
Streamlight makes the best flashlights! The Wedge is a great EDC pocket light, I don't go anywhere without mine. The Strion LED is the best for automotive work--robust, long battery life, and very bright. They have really good warrantees as well.
The absolute best shop light is the folding style harbor freight one, they are rechargeable, really strong magnet with good battery life. About 30 dollars
My best shop lights honestly are the ones from the local dollar store. They have most of the features of new lights like magnets, hooks, kickstands cob led and led arrays all in one. They are also only a few bucks so if you put them somewhere and hurt them it doesn't matter!
I have a ryobi cordless kit. I bought the led fold out light. It’s very bright. Model p727. Like $60 from Home Depot. The cordless air pump is pretty cool too.
Regarding the "rebuild it yourself" mentality. I think a lot of people would love to rebuild their own engine, the big barriers for most people are the time, tools, and space.
Yup, i want to rebuild my FC but im not sure when i want to start. I think i'll do it when i finally have a reliable car which won't happen since i only own project cars 😭😭😭
@@Alex-vz2jz Yeah, I elected to have my classic Porsche 911 engine built with a lot of fun bits by a shop, because the cost of simply buying the tools and dyno time would have been more than half of the shop cost.
The question about light. Get some decent head lamp with rechargeable/replacable 18650 battery and a dedicated charger for cells. It's a life changer. Can't believe professional car mechanics are still using flashlights or putting them in their mouth.
The coolant passage in the rear iron that you broke off is a lot easier to get out with a screw extractor. When I broke that fitting on my motor I used the screw extractor with a drill and eventually the fitting will grab and start spinning, while it’s spinning pull out and boom it’s out and no damage to the iron
Rob, the gunk is a mix of water and old coolant sitting for years. Seen this alot on engines that has sit a long time or been mixing coolant between red and green/blue antifreeze. Also springs on the old engines are crap, esp the corner seals they flatten instant almost :P So do your self a favour and replace all seals and springs with same you would use on and Rew engine. And go 2 piece seals as well and don't go it has to be stock Turbo 2 seals. They suck and can't handle any boost or power at all. Glad you decided to split the engine. My first thought was split the engine as it's been sitting for way way too long. Looking forward to seeing what you will do with this car :)
As for the shop light comment, I use an 18650 battery powered LED headlamp when working and it does wonders. Get an external battery charger, handful of batteries, and just swap them out every 6 hours or so 👍🏼
It hurts to see all the hate on microtec. Those things were great for their time. Got a lot of cars down the track and set a lot of world records. The microtec had no closed loop control, just data logging. Sold quite a few of those.
I was going to recommend Isaiah the Braun 390 lumen flashlight from harbor freight but then i saw him using it in the next clip. You already have my favorite flashlight
To repalce your phone you can use a ''mechanic neck light''. I use them for 2 years now and I couldn't do without it. As I like to say '' the sun folow you everywhere''
The way to take out an FC dash the first time is to break all the tabs
As a Mazda fanboy, that's how you work on all Mazdas. Break shit accidentally and wonder who got paid to design it
You should see my Mustangs dash. Mind you i bought it Roadkill style from the junkyard and drove it home but god damn them people didnt know how to remove a dash.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋
I will accompany, and make you happy💋🥰
#ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
He said "B+" and having taken out my fair share of dashes that is a garage queen dash. They don't come any better than that.
It's the only way! This is the way haaaaaaaaaa
Love your work and your new shirt 🥳
This comment makes me so happy!
Fancy seeing you guys here you Big Beautiful B@stards! 💪🏼
Hopefully Marty's RX7 hasn't got a cheese issue!
You boys are straight up good lads. Love from Canada! Excited to see what you are paint matching!
@@tomjackman8531 If this were a Norwegian RX7 it would be Brown cheese, and they would be damn proud of it!
You should put a lapel mic on Isaiah, so he's always in perfect audio. This would give you several major advantages. When Isaiah says something we'll be able to hear him better. When Isaiah says something dumb you can use editing software to isolate what he said and remove it. You can also edit together an independent video of just shit he says.
Second this^
Thirded ^... he has no self edit function, but but I want to be able to hear when he's explaining things.
Isaiah's such a find, Rob.. that said when you are front and centre you need not to be upstaged.
im gonna say it. His bullshit from the background is way funnier being shouted from back is way funnier than clear audio.
@@tinyhippo1644 Yeah, but sometimes hes got something Important, interesting, compelling, practical to say and we just can't hear it.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋
I will accompany, and make you happy💋🥰
#ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
Rob: *_finally has a rollcage_*
Also Rob: *_”That’s like 40 lbs of weight savings”_*
Plug coolant holes and fill with muratic acid. That’s how we clean out mineralized cooling passages in boat motors at the marina I work at. Leave it in over night then flush with water the next day. It works wonders
I love that the MCM guys sent you some stuff. Gotta love the YT creator appreciation.
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋
I will accompany, and make you happy💋🥰
#ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
These bots are outta control lol
IN THE BIN!
I love how Rob's normally like "OEM++" but with this it's "almost OEM" 🤣
His Dorito pack had a five cheese flavor!!
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋
I will accompany, and make you happy💋🥰
#ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
"I'm just gonna take it apart and take a quick look" knowing damn well he's timpted to Dowell the motor
This to me looks like it was straight water ran (probably not even distilled) and just years of electrolysis from the dissimilar metals of the housings and irons. This almost certainly would have had a coolant seal failure. I'd definitely want to measure the land between the water jacket and seal groove to make sure there is enough material left. They can sometimes be deceiving there they look sufficiently thick, but are just full of pitting and will crumble at looking at them wrong. For lights I recommend the Snap-On Necklamps, you can wear it around your neck (as the name) or on your head, plus they're super bright.
I recommend dollar store flashlights for a dollar each, because they will break. At least you'll care less about them that way.
I've been using the Snap-On Project (ECPRA072GR) light and really like it. USB-C, no modes to flip through, just on/off, adjustable brightness (long press on power button) and adjustable base and a darn strong magnet. I left this under a customer vehicle and they took it off and brought it back once they drove to their facility.
Just have to say this is by far my favorite RUclips channel. Not everything is perfect and yet, that’s what makes it perfect. Just three guys getting shit done in a shop with Rob, putting his own money into something he is so passionate about. Keep up the great work guys. Almost at a million subs.
There are no freeze plugs in the rotor housings under the lower intake manifold from the factory. The front rotor is blocked by the lower intake and the rear feeds the stock coolant line for the turbo. It is best to install 20mm freeze plugs in both holes. That way you don't heat the lower intake manifold unnecessarily with hot coolant in the rear housing. The top coolant outlet on the rear iron that was plugged (and then broken off) is the preferred spot to use for feeding coolant to the turbo, I wouldn't plug it.
No sht Sherlock
@@boostmafia3735 keep digging wstson
@@boostmafia3735 I say that because they acted surprised in the video that there were no freeze plugs, Sherlock.
What if u do plug it
Best-PartnerⓈⒺⓍⓈ🔞------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------💜 Aishite.Tokyo/Tatsuhisha?Heavy-Sex 💋
I will accompany, and make you happy💋🥰
#ライブ配信の再編ありがとうです！#この日のライブ配信は、#かならりやばかったですね！１#万人を超える人が見ていたもんね（笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした！#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです！#この日のライブ配信は、#１万人を超える人が見ていたも ん（#笑）#やっぱり人参最高！#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです！（ #笑）#垃圾
Why i love watching rob dahm for almost 10 years is that he is always extremely melodramatic lol
His Dorito pack had a five cheese flavor!!
Wait... 10yrs?!? And they say 'we're not pros, we're idiots (like you)'? Probably need to revisit that one. Probably not just idiots, lol
@@nooboftheyear7170 you can do something wrong for a loooong time
@@themonsterodub actually yes, been there and still finding them things, lol
@@nooboftheyear7170 learned that easy buying my rx8. Thought I was in good hands knowing the guy had owned rotaries for 30 years. I've found missing bolts holding my trans and starter on, all sorts of hack job electrical stuff around the downstream O2 sensor and a "my buddy's got a welder" cat replacement. Only good thing he did was keep the rust off the chassis 😂
Luckily Mazda still sells brand new dashboard vents for the windshield and the other smaller vents. Mine crumbled as well in my Turbo II when I removed my dash several months ago.
"As much as I want the RX8 to win, I don't want it to win like this" it's simple, but respect.
Those new tools at work doing the lords work
@@ミズキ-r6p stop with this shit
@@ミズキ-r6p Annoying bots need to find a real job
@@yasha1928 yeah it's scam I gurentee
Rob loves the vids can’t wait to see a rotary swapped Ferrari one day
Or Diablo……..
Already exists 💀
Ferrari would probably sue 🤣
Allready been done in nz the rotary Ferrari 🔥
A 8 rotor naturally aspirated
50,000 more subscribers Rob! Here's an early congratulations! Thanks for all the entertainment you have provided us over the years. We appreciate everything you do for the rotary community.
Yo Rob! I don't usually post a comments on videos but this video man...it didn't feel like I was watching a 50 minute video. At most! 20 minutes. Keep up the grind man! Been watching since 2018
Nearly one hour to watch, with approximate 6 hours of potential sleep. Worth it!
Lol... sleep is overvalued
It was so good, I didn't realize it was 50 minutes until I read your comment.
Playback at at least 1.5x 👌
Dam! I bet you are so glad you took that apart first!
You probably know this but it might help someone. Around 6 years ago I got a set of rotors for my 13b and they are polished with a buffer wheel, I have rebuilt the engine after 4 years of running and there was hardly any carbon in the engine stuck to the rotors. Any carbon left on the rotors wiped off with a paper towel. Maybe a nice machined rotor face could do the same.
To get that tube out, put a bar inside then grip and pull, the bar will stop it crushing/snapping
Holy crap, that's definitely the trick !! Great call, hopefully Rob will see your comment 👍
Is it just me or does anyone else see rob just building the ultimate Mazda rotary collection in my opinion all he needs to build after this is an RX3 and eunos cosmo and then he’s basically got the perfect rotary collection
Dont forget the Repu for his uhaul trailers
I have been watching the show for over 2 years now, and I can clearly say that I really enjoy it every time I see a new video I am very excited. The longer it is, the longer I will enjoy it.
Thanks for all the good videos.
From a French fan.
I’m 15, and I’m learning about rotaries everyday, every time I watch ur videos I learn something new
Love that Marty, Moog and yourself are in touch, literally my 2 favourite RUclips channels/guys in communications..
Imagine if Colin Furze gets involved lol...
Massive appreciation for all of you 🙏🙏🙏🙏
nice video rob! i like that it was 40 minutes.
Waiting for Rob to help MCM with the rotary :) Love seeing Rob progress and destroy the bad stigma of rotaries!
That gauge is a classic, most widebands had a narrowband output, that would convert the 5 or 3v to 1v and would display the ratio perfectly on that autometer gauge.
A good explanation of how things should work and what can go wrong.
absolutely, love the long form content, just needs more mics! great work rob, love to see all the progress!
That IS A SWEET gift from Mary and Moog!!!! Yeah Boys!!!!
So for good shop lights, just hop on a snapon truck, ask for the specs on the light you like, somehow make it off the truck without buying anything, check the price on that light online and make sure it’s a good price, and you’ll be set. It’s like some brand called streamlight and the snapon guy will give you a lifetime warranty on it. Those lights are friggen tough. One of my coworkers had one run over by a trucks 6 times before it broke. Super bright and grab some rechargeable batteries and you’re set. The little pen light only cost like 40. I know this sounds like an add of some sort but as a mechanic this light was way better than any other autozone light.
"somehow make it off without buying anything" 😂
Streamlight is trash, I went through half a dozen in one year, not even dropping them. Switches all give out. Atleast I got them all on warranty, Snap On now carries Coast. Much better quality with those. I personally love Snap-On's neck light, it IS crazy fucking expensive for a flash light, but its so handy and they're bright AF.
i really appreciate the detail regarding the thread type and size of the various oil and water lines and sensor ports on the housings, i didn't realize that some were a straight metric thread without a taper, and requiring an o- ring or other perhaps a copper washer like fuel or brake lines
Love that Moog sent some swag. It’s cool to see the two.
Rob! You should dry ice clean the whole underside of the car. Would be a game changer for that OEM++ look! Matt from Obsessed Garage distributes them now. TommyFyeah is also using the same machine.
Love the period appropriate 80's synth background music interspersed throughout the video. 👌
Rob, for tapered taps the standard rule is 12 turns. They make thread gages for them that have a mark, but 12 turns has never led me wrong.
I have a 86 NA sports and its on 87000 km (54k miles) stock untouched motor. It sat for 10-15 years, a year before I brought it and when I had it I only drove it every weekend or so. It ran perfectly no issues but when I first got it the coolant system looked disgusting so I drained it flushed and thought it was good to go. Had the car serviced just so I could get it checked over for any issues I need to address. The following weekend after the service I started it up and let it warm up in the driveway and then when backing out of the driveway there was coolant everywhere (Waterpump leaking from the weep hole) so I replaced the water pump and went to start it and had trouble starting it. Tried a couple basic things and nothing worked so sent it back to the shop to be looked at and that’s when I was told it’s lost comp on both rotors. 25 psi all around and 28 on one face of one of the rotors. This baffled me as from my understanding, for what seemed to be a healthy engine with not even a single issue. To lose comp on both rotors seemingly out of no where is just wrong. But after seeing this video I’m wondering if it’s because it spent most of its life sitting being on only 87000 km (54k miles)I’ve got a couple things I’ve been told I could try to start it but if none work I’m thinking of pulling it out myself and rebuilding it myself as I don’t have much money and learning to build engines especially rotary is my dream. I should note I’ve never done an engine rebuild before so I’ll be taking an extreme amount of time to get it perfectly and educating myself before trying anything. Your videos will be extremely helpful. But yeah if anyone’s got any feedback on any of that it’d be much appreciated as I’ve got no clue what happened and neither does anyone I’ve talked to so far : /
*_Rob, you have another chance to race the Hoonicorn! Except this time it's Ken's 14 year old daughter driving it._*
@@ミズキ-r6p Repent to our lord and savior Jesus Christ. REPENT, WENCH. REPENT.
@@connorcampbell5274 balls
@@connorcampbell5274 such an ugly name, icky gross.
@@FappinSteve I know, right? Awful fucking name. Imagine only having 4 unique letters in your name. It's like they wanted a symmetrical name, but couldn't finish writing the C at the end.
Oh wait til you see what we are going to announce related to that. Going to blow your mind :-D
I would love to one day see rob get the opportunity to conceptualize what a 2022 RX9 would look and sound like.. that would be one hell of a build. ❤️
all of the blockage is the aluminum reacting to coolant setting in the block . even if it was freshly rebuilt just setting for 10 years would do that luckily now we have coolant that will protect the aluminum from getting that bad .it was a damn good idea to have taken the block down it would have died if you had run it like that .
The fittings+orings (at 31:30) you mention being rated to "2000 psi or something" are actually rated to 3000 psi. I make fire suppression systems and the fittings we use look identical to yours, and are pressurized to 3000 psi every time in order to pass DOT spec. Your fittings are comfortable up to 3000 psi at the very minimum
Highly recommend the OLight flashlights. Fantastic lights! Served me well for 6 years so far
Rob, would it be possible to get even a short video going over where each car is at, current plans/goals with the car, and if we can expect any upcoming content on the car? Curious what we'll see from the 4 rotor FD next, and when we can expect a 6 rotor lambo! Cheers.
My favorite part of this video is the Tropic Thunder reference. I love that movie
Hey Rob. Your videos teach and motivate me to work on my own project that I've been too intimidated by for years. You give me hope. Thank you.
7:35 [I'm looking for a good shop light] A pair of Milwaukee Underbody Lights #2126 are great for working under vehicles. Their Underhood light #2125 is also cool as an area type light. The Astro 40SL and 72SL are also handy especially when there's something nearby to stick their magnetic base to.
Nice video! When tapping NPT use an NPT plug gauge so you know how deep to go. The NPT plug gauge has a notch to indicate the proper tapping depth.
Ryobi lights are awsome. Awsome to get special merch from MCM. Love both of you
24:12 No Rob, thats SUPPOSED to be coolant...
There's a video with a truck (F150 i think) flywheel that cut its way through the transmission tunnel. So yeah, when they fall off, they don't play.
I hope you can get to 1 million by the end of the year
Where i work we use headlamps all the time, it looks dumb but after you use it a week you dont want something else. It is something like the ledlenser MH10. Light in the front, 1 elastic band and battery at the back.
Streamlight makes the best flashlights! The Wedge is a great EDC pocket light, I don't go anywhere without mine. The Strion LED is the best for automotive work--robust, long battery life, and very bright. They have really good warrantees as well.
Thank you for uploading back to back like this, you just made my whole day :) with such a long video too :o
I will 100% be getting an RX7 because of you
The absolute best shop light is the folding style harbor freight one, they are rechargeable, really strong magnet with good battery life. About 30 dollars
rob dahm x mcm. The crossover that no one expected but everyone wanted
My best shop lights honestly are the ones from the local dollar store. They have most of the features of new lights like magnets, hooks, kickstands cob led and led arrays all in one. They are also only a few bucks so if you put them somewhere and hurt them it doesn't matter!
Love when my favorite channels are favorites between each other as well lol
After midnight in Poland, where i am watching from, got to wake up in 5/5.5 hours for school, but damn it was worth every damn minute watching it
I have a ryobi cordless kit. I bought the led fold out light. It’s very bright. Model p727. Like $60 from Home Depot. The cordless air pump is pretty cool too.
I daily a 90s Chevy truck. The oil pressure, oil temp and water temp are essential HAHA! Great vids as always!
I’m glad y’all took it apart. That’s gnarly
Love the Death t-shirt. They don't get near enough love.
Marty and Moog support you? I support you! MCM is the bee's pajamas!
Regarding the "rebuild it yourself" mentality. I think a lot of people would love to rebuild their own engine, the big barriers for most people are the time, tools, and space.
Yup, i want to rebuild my FC but im not sure when i want to start. I think i'll do it when i finally have a reliable car which won't happen since i only own project cars 😭😭😭
@@Alex-vz2jz Yeah, I elected to have my classic Porsche 911 engine built with a lot of fun bits by a shop, because the cost of simply buying the tools and dyno time would have been more than half of the shop cost.
Agreed, I don’t have the time but I want to rebuild or swap my 4.4 out of my El Camino. A rotary would be awesome but I wouldn’t be able to find one
The question about light. Get some decent head lamp with rechargeable/replacable 18650 battery and a dedicated charger for cells. It's a life changer. Can't believe professional car mechanics are still using flashlights or putting them in their mouth.
USB rechargeable headlamps FTW.
Yea black diamond makes a nice rechargeable headlamp
O light
Rob and his boyfriend work together very well! ❤️
the bar led light with the magnet on the bottom from napa is actually v nice and they can deliver it like parts if you have a shop account
Mighty Car Mods showing love!! That's so cool.
The coolant passage in the rear iron that you broke off is a lot easier to get out with a screw extractor. When I broke that fitting on my motor I used the screw extractor with a drill and eventually the fitting will grab and start spinning, while it’s spinning pull out and boom it’s out and no damage to the iron
Rob, the gunk is a mix of water and old coolant sitting for years. Seen this alot on engines that has sit a long time or been mixing coolant between red and green/blue antifreeze. Also springs on the old engines are crap, esp the corner seals they flatten instant almost :P So do your self a favour and replace all seals and springs with same you would use on and Rew engine. And go 2 piece seals as well and don't go it has to be stock Turbo 2 seals. They suck and can't handle any boost or power at all. Glad you decided to split the engine. My first thought was split the engine as it's been sitting for way way too long. Looking forward to seeing what you will do with this car :)
"We are idiots, just like you guys"
Lol I felt that.
man I love the energy these videos have
To Isaiah: The M12 Rover LED Floodlight is awesome and only like 60 bucks. I've used it literally every day since I bought it a year ago.
A great shop light (hand held with a hook) HEMImini, cliplight, you will love it!!!!
Love ya Rob, But I still want a Water Temp Gauge.... even more if its a track car.
Coast makes some great magnetic work lights about the size of a fist and rechargeable for a good price. They're also focusable on most models
As for the shop light comment, I use an 18650 battery powered LED headlamp when working and it does wonders. Get an external battery charger, handful of batteries, and just swap them out every 6 hours or so 👍🏼
21:07 we all know what you meant! Don't hide it.🤣🤣🤣🤣 Love the videos dude keep it up.
Gotta love stopleak! It stops everything.
Yoooo I've been following MCM for 4 years now. Those dudes are pretty cool. 👍
I like the streamlight stinger hl for a shop light. I used mine for 2.5 years without any problems before I lost it.
Aye man your vidoes are super educational appreciate the time you take
Thank you for the shameless plug @rob! I’m glad my video could help y’all out 🙌🏻🙌🏻 side note if anyone likes rad FCs I have one all over my channel.
It hurts to see all the hate on microtec. Those things were great for their time. Got a lot of cars down the track and set a lot of world records. The microtec had no closed loop control, just data logging. Sold quite a few of those.
LOL "I was high" 28:15 this will be my go to whenever something doesn't go right.
I was going to recommend Isaiah the Braun 390 lumen flashlight from harbor freight but then i saw him using it in the next clip. You already have my favorite flashlight
Milwaukee has M18 lights that are on tripods already. You can set em up and be hands free. They're bright AF.
Can confirm, I have 2 of these at work and they are awesome. We use them a lot and they're almost too bright.
Get one of those headband lamps. That'll be the best investment ever. It truly is a game changer
Streamlight 66134 pen lights are the best handheld lights I have come across so far!
Phone cord?! I'll have you know that is an RJ12 6 pin serial data cable thank you very much. Love the content, thanks for all you do.
Love the length of this video
Best RUclipsr right now!
Somebody put hard water in there when they diluted their coolant mix. It is a very good thing you tore this down instead of just getting it running.
To repalce your phone you can use a ''mechanic neck light''. I use them for 2 years now and I couldn't do without it. As I like to say '' the sun folow you everywhere''
Astro Pneumatic lights, are the lights I use everyday at work and I love them.
19:27 these faces rob is making, i'm dead