Fast easily explained no b******* very well done very easy to follow no problem loved it thanks I hate these idiots that go on about a bunch of other crap has nothing to do with what we need to know and you were straight up to the point right on
You saved me so much time your awesome.. gonna do this now got everything stripped and just need to wire and she’s good to roll after a $12 carb off eBay I’ll have $60 into this wheeler bahaha
I like what you did here.... but without a voltage regulator you will fry your battery. No big deal if you don’t mind buying batteries often. Thanks for the video.
I just have one question. Does the thick green wire from the battery just ground to chassis? And the red wire from the solenoid go to positive on battery?
I just got this Chinese 110cc atv. previous owner hasn't ran it in two years. With you push button start and your kill switch how did you wire those up. For the push button was it connected directly to the solenoid both wires or was one connected to the positive side and the other to ground. Same for the Kill switch was one side connected to the black/yellow side of the ignition coil and he other side to ground. This will help greatly since the I'm not able to find the correct handle bar assembly that matches up pin for pin on my wiring harness.
Teresa Benesch I ran new wires for the push button start straight to the solenoid. I bought a heavy duty button from oriely auto parts. I also had to remove a black/white wire from my harness that ran to the kill switch. I left that wire hooked up though as it ran from cdi to ignition key
Slayzer. Are you asking about 2nd vid. For the voltage regulator.? This video will get it running if it did not then you need to replace 1 of 3 things or all 3... 1) CDI 2)COIL PACK AND WIRE 3) STATOR.... LOOK on eBay stuff is super cheap brand new always buy from a dealer not an indival. And always make sure they accept returns
Wondering what you would suggest if I did this and still have no spark…new cdi coil stator and solenoid was wondering if maybe the actual magneto could go bad
one side of the solenoid and take the other wire and connected to the other side of the solenoid this will turn the starter over when pushing on the button remember to tape up NE ne any bare wires or bear terminals you do not want to be touching metal on your switch or button when applying pressure to start it you will get a little jump meaning you will get shocked take two wires and connect each wire to one of the two terminals on your button connect the other wire to the other terminal then connect each wire on one side of the solenoid and take the other wire and connected to the other side of the solenoid this will turn you starter over when pushing on the button remember to tape up any any any bear wires or bear terminals you do not want to be touching metal on your switch or button when applying pressure to start it you will get a little jump meaning you will get shocked for the kill switch one wire go to the black and yellow wire on CDI the other goes to ground on the frame
really good tutorial.. was wondering if you could draw up a diagram on the wiring.. im in same boat i have a 125cc Chinese motor completely have to rewire everything
how did u install that push to start button? Is it one wire going from the button to the solenoid and then one wire going from the button to the battery?
could you help trying t figure out my wiring mess.. i have to completely rebuild it i have understand your video but there are still some wires i do not know quite where togo
if the solenoid is clicking it's bad and needs replaced you can bypass it by Simply take a screw drive and touch both ends of the solenoid using the screw as a conect point then check spark
I jumped the solenoid and it tried to turn the starter over so it seems fine. I just bought a new stator off ebay and waiting for delivery. I wasn't getting any spark or anything. No readings either from the multimeter either when checking the stator.
I wired mines just like yours and put a new carb . It fired up and I road it down to the corner of my block and it died on me. Now I cant get it to start up. just cranks and carb spits after a couple of try's. Any help would be appreciated I don't know much other then what I lean of you tube.
Hay I have a I have 10 CDi and it has blue,green,black and white,red,yellow and I can't find where the connections go can u help plz that would be great . And good video
Literally trying to do this. Not getting anything Blue and white to blue and white Black and yellow to coil. Green off coil grounded Red and black to red and black Black off cdi grounded.
Jarrid Carroll clean the carburator with chem-dip or first try to back out the idle screw on top of the throttle and give the throttle a couple pushes with the choke open. reposition your screw and pump 2 or 3 times more. she should be primed and ready to fire
Good call, I would have done the same. remember though that cdi box is cheap. made cheaper. lol. I think I would get a cdi box also. there 10 bucks online then you will 4 sure fire it up
6 pins are a little diff you should only need the r wires that are in the video take those 2 wires you won't need and extract them out of the 6 pin cdi box make sure you get the metalb clip that clips into the box any part of the metal clip is left in the box. The cdi will read and think it's still in tact and not (trick) it into thinking it's gone
Why not buy the 20$ full wire and electronics kit. Good video to help get ya home but i have to jump my atv off the starter and i can tell you its not worth it if you have the skill and 20$
you need one wire to positive side of solenoid and one wire to the negative side of the solenoid. when button is push you should here the starter trying to turn over.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
best video on RUclips about Chinese ATV wiring thanks helped alot
Thanks for the video! I have been looking through a lot of videos and The way you explained it. I finally got my ATV running!
yeah bro it's not every day I find help on RUclips that's valid. thank you. you saved me such a head ache
Fast easily explained no b******* very well done very easy to follow no problem loved it thanks I hate these idiots that go on about a bunch of other crap has nothing to do with what we need to know and you were straight up to the point right on
You saved me so much time your awesome.. gonna do this now got everything stripped and just need to wire and she’s good to roll after a $12 carb off eBay I’ll have $60 into this wheeler bahaha
Hot damn 🥵 thanks bro I was having trouble for about two years... My son super happy
Thanks for the post. Worked like charm!
This worked perfectly for my Taotao 110b....thank you!
Where is the plug wire in all this?
awesome video after watching this i got mine to run
Thanks this video always help me with these atv
I like what you did here.... but without a voltage regulator you will fry your battery. No big deal if you don’t mind buying batteries often. Thanks for the video.
best damn video I have seen yet
thank you very much. but where go's the wire for the starter and spark plug? How to add an ignition key and lights?
once you follow his directions you can add your (stock)yellow accessory wire.
I just have one question. Does the thick green wire from the battery just ground to chassis? And the red wire from the solenoid go to positive on battery?
All I can say is THANK YOU!
Thanks for the vid finally got mine running keep it up.
I just got this Chinese 110cc atv. previous owner hasn't ran it in two years. With you push button start and your kill switch how did you wire those up. For the push button was it connected directly to the solenoid both wires or was one connected to the positive side and the other to ground. Same for the Kill switch was one side connected to the black/yellow side of the ignition coil and he other side to ground. This will help greatly since the I'm not able to find the correct handle bar assembly that matches up pin for pin on my wiring harness.
did you get any responses to your questions
Teresa Benesch I ran new wires for the push button start straight to the solenoid. I bought a heavy duty button from oriely auto parts. I also had to remove a black/white wire from my harness that ran to the kill switch. I left that wire hooked up though as it ran from cdi to ignition key
Slayzer. Are you asking about 2nd vid. For the voltage regulator.? This video will get it running if it did not then you need to replace 1 of 3 things or all 3... 1) CDI 2)COIL PACK AND WIRE 3) STATOR.... LOOK on eBay stuff is super cheap brand new always buy from a dealer not an indival. And always make sure they accept returns
Wondering what you would suggest if I did this and still have no spark…new cdi coil stator and solenoid was wondering if maybe the actual magneto could go bad
Yes the magneto could absolutely go bad
Step bye step help to build my own harness starting from cdi to react
one side of the solenoid and take the other wire and connected to the other side of the solenoid this will turn the starter over when pushing on the button remember to tape up NE ne any bare wires or bear terminals you do not want to be touching metal on your switch or button when applying pressure to start it you will get a little jump meaning you will get shocked take two wires and connect each wire to one of the two terminals on your button connect the other wire to the other terminal then connect each wire on one side of the solenoid and take the other wire and connected to the other side of the solenoid this will turn you starter over when pushing on the button remember to tape up any any any bear wires or bear terminals you do not want to be touching metal on your switch or button when applying pressure to start it you will get a little jump meaning you will get shocked for the kill switch one wire go to the black and yellow wire on CDI the other goes to ground on the frame
Brandon Robinson do you have a diagram? Trying to figure out where to wire the push button
Did you ever do second video?
Did all that still no crank, when hooked to a battery. I can make it crank if i cross the started selonoid with a screwdriver but thats it?
clayman23415 bad solenoid
ok on my atv 110cc coil got to wires cumin out the coil & that r yellow & green &yellow red wut do that go..
really good tutorial.. was wondering if you could draw up a diagram on the wiring.. im in same boat i have a 125cc Chinese motor completely have to rewire everything
how did u install that push to start button? Is it one wire going from the button to the solenoid and then one wire going from the button to the battery?
could you help trying t figure out my wiring mess.. i have to completely rebuild it i have understand your video but there are still some wires i do not know quite where togo
Where does the other side of the negative wire that attaches to the battery go? Please help
hey my man i wired it up like you told but its fireing but not fireing the motor over i dont think it has enough spark what can i do
Thanks i started my coolster atv
if the solenoid is clicking it's bad and needs replaced you can bypass it by Simply take a screw drive and touch both ends of the solenoid using the screw as a conect point then check spark
I jumped the solenoid and it tried to turn the starter over so it seems fine. I just bought a new stator off ebay and waiting for delivery. I wasn't getting any spark or anything. No readings either from the multimeter either when checking the stator.
How to build your own harness for four wheeler drive
the green ground and the red wire connected in the solenoid dont need to be plug in anywhere?
I have heard many different ways of rewriting it, all that happenfis clicking from the solinide and no spark can you show me everything you have done
Hey dude where does the random green wire go I looks like it's on one end of the starter but I can't tell
how much voltage should be coming from the CDI to the coil pack the yellow and black wirr
I wired mines just like yours and put a new carb . It fired up and I road it down to the corner of my block and it died on me. Now I cant get it to start up. just cranks and carb spits after a couple of try's. Any help would be appreciated I don't know much other then what I lean of you tube.
will u show how u wired the push start and toggle switch thinking about using a push start with toggle like on a nascar
Hey mate can you please do more videos on this I like it and I subscribed
U are awesome dude
Hay I have a I have 10 CDi and it has blue,green,black and white,red,yellow and I can't find where the connections go can u help plz that would be great . And good video
what do i connect the starter selenoid connecter to its 2 cables i think like red/yellow
Literally trying to do this. Not getting anything
Blue and white to blue and white
Black and yellow to coil. Green off coil grounded
Red and black to red and black
Black off cdi grounded.
Good video, very helpful.
TY BRO!!! simple and easy. i was so lost lol
I have a taotao 120cc I'm looking for some info on how to rewire it i dont know a whole lot about it any help
thanks alot save me alot of trouble
I did this can finally make it start but it won't stay running any ideas?
Jarrid Carroll clean the carburator with chem-dip or first try to back out the idle screw on top of the throttle and give the throttle a couple pushes with the choke open. reposition your screw and pump 2 or 3 times more. she should be primed and ready to fire
I have a 110 atv when i got it no wires come with it how do i rewire it?
My engine 110cc atv engine 3+1 speed 1 reverse, it doesnt has gear shift so you can explain me? Can you give diarphragm of it
I will this evening when I get off work
@@NoMercy83 Thank you advanced
Good call, I would have done the same. remember though that cdi box is cheap. made cheaper. lol. I think I would get a cdi box also. there 10 bucks online then you will 4 sure fire it up
Yo i have a chinese redcat 6 pins nd it want crank but turns over really getting pis can yah please help me robinson nd great video..
6 pins are a little diff you should only need the r wires that are in the video take those 2 wires you won't need and extract them out of the 6 pin cdi box make sure you get the metalb clip that clips into the box any part of the metal clip is left in the box. The cdi will read and think it's still in tact and not (trick) it into thinking it's gone
Where is the solenoid plugged up to
Mota. What are you having issues with on your a tv.?
Have problem with cranking from switch
wich wire need to be connected on the grey box ?
Yo i have a chinese redcat 6 pins nd it want crank but turns over really getting pissed can yah please help me robinson nd great video..
If it's turning over. 1st are you getting spark.?
No i burnt out my coil. Nd waiting on a new 1 to come in...also i think it wasnt getting fire from the spark
thanks for making me hurl due to your sidewayz vid........uuuuuuggghhh!
does it only crank or does it run aswell
you are awesome help. thanks
DO NOT ATTACH YOUR YELLOW ( ACC. WIRE FOR LIGHTS, HORN , ETC...) UNTIL YOU KNOW IT'S FIRING AND RUNNING
Can I do my scooter the same way
im going to use this as a tutorial and try to improve on your bad ass diagram.
What is the solenoid connected to?
Remote start?
Where do I put the green wire from the battery
Harrison Longhi to the green ground lead from engine
I have a redcat 110cc can you give me some advice
how can i started with out a key? i lost my key!
But a new ignition switch with keys on eBay. It's like 6 bucks
Man I have the excact problem but I wish u would help me,,,but im in texas :-(
what does the CDI do?
buy a 5 pin cdi box see the state works correctly and then follow my video
Brandon Robinson mine just keeps clicking n clicking
Brandon Robinson 2012 peace sports 110cc tpatv 512 - 110.
could anyone tell me why when I start my atv it goes full throttle please some one help me
Teresa Benesch check the throttle it's probably stuck
thank you
thank u bud
tanks you men
have Chinese atv won't start at all looking for ur second video just watched ur crank video
Why not buy the 20$ full wire and electronics kit. Good video to help get ya home but i have to jump my atv off the starter and i can tell you its not worth it if you have the skill and 20$
you 4got to turn it on
Mkuhh. Mkuhh. Watched enough southpark xD
1 red cable from battery to 1 side of silendo. 2nd red cable from 2nd side of silendo to the starter.
what wires do I need to do a push start on a tao tao atv 110cc please help
you need one wire to positive side of solenoid and one wire to the negative side of the solenoid. when button is push you should here the starter trying to turn over.
2nd video??
can you send me pics brandon please.
part 2
follow my video step by step it will work
mmmmmm kkaayyyy (mr makey)
This guys on meth you never showed where the grounds went to
not pretty but guess it work
pls make a better vid of thise
this
I agree with everyone here in the comments.all other vids seem to be bullsh t.
Thank you .
Junk
jvx 313-676-8593 fuv
big red i have 260 linhai scooter 2005.....can not get the rite kill switch start switch....the plugs have changed from 2005...pls help
Yo i have a chinese redcat 6 pins nd it want crank but turns over really getting pis can yah please help me robinson nd great video..
Yo i have a chinese redcat 6 pins nd it want crank but turns over really getting pissed can yah please help me robinson nd great video..