Error Codes Of Samsung Front Load Washing Machine | How to Solve Them
HTML-код
- Опубликовано: 16 окт 2024
- Supports Us www.patreon.com/somaelectricals If You liked the Video, Kindly Support Us:
paypal.me/bija...
Paytm, Phone Pe, Google Pay : 9000005315 BUY
Quick Descaler: amzn.to/2Pdc0Od Support our Channel: www.youtube.co...
Follow Us / somaelectricals
1. nd, 5E (Won't drain) The washer failed to drain within 15 minutes. Check the washer drain path for a clog or restriction. Clear the large item filter in the drain pump. If the drain pump doesn't drain the water when activated, replace it.
2. LO (Door unlock error)The door fails to unlock after 7 attempts. Unplug the washer and open the door, using force if needed (using force often damages the door lock/switch assembly). Replace the assembly if it’s damaged or defective.
3. nF, 4E (Water fill problem) The washer fills for 40 minutes or the water level doesn't change after 6 minutes. Make sure the water supply faucets behind the washer are fully open. Check the water fill lines for kinks and freezing. Check the water inlet valves. If the valves are defective, replace the water inlet valve assembly
4. FL (Door lock error) Door fails to lock after 7 attempts. Unplug the washer and check the wiring harness connections to the door lock assembly. If the wiring connections are sound, replace the door lock assembly
5. LE (Low water level) Water level drops below the reset level during the wash or rinses cycles. Check for leaks in the washer tub and connected components. Check the installation of the drain system; water can siphon out of the washer if it’s not installed properly
6. lE, 1E (Water level sensor failure) Unplug the washer. Check the wire harness connections between the water level sensor and the main electronic control board. If the connections are good, replace the water level pressure sensor
7. OE (Water overflow) If the washer is overfilled, unplug it to see if it continues to fill while unplugged. If it does, replace the water inlet valve assembly because the inlet water valves aren't shutting off water flow. If the washer isn’t overfilled, replace the water level sensor because it isn't accurately detecting the water level
8. dc, UE (Unbalanced load) The load is detected as unbalanced during the final spin. The basket won't spin over 150 rpm when this code is displayed. Cancel the cycle or let it end. Adjust the load and see if the washer spins properly. If not, inspect the suspension system and replace any defective parts
9. E2, bE2 (Stuck button) A button on the control panel is stuck. Try to free the stuck button. Press down directly on top of all keys on the control panel. If that doesn't free the stuck key, press down slightly off-center on all keys. If you can't free the button, replace the display control board
10. ds (Door is open during locking) The control detects that the washer door is open while it’s being locked. Use the diagnostic test mode to check the door lock/switch assembly. If the door lock/switch assembly is defective, replace it
11. tE, tE1 (Water temperature is too high or too low) Use the diagnostic test mode to determine what water temperature the electronic control board measures. If the actual water temperature is significantly different, replace the temperature sensor (also called the thermistor
12. 3E (No signal from the drive motor tachometer) Unplug the washer. Check the wire harness connections between the drive motor and the main control board. Reconnect any loose wires or replace the wire harness if damaged. If the wire connections are okay, replace the motor tachometer. If the problem continues, replace the drive motor
13. Hr (Heater relay failure) The heater relay is a component on the main electronic control board. Unplug the washer for 5 minutes to reset the electronic control board, and then plug in the washer. If the code returns, replace the electronic control board.
14. nF1, 4E2 (Hot and cold water connections are reversed) Connect the hot and cold water fill hoses correctly
15. 2E (Internal control board failure) Unplug the washer for 5 minutes to reset the electronic control board, and then plug in the washer. If the code returns, replace the electronic control board
16. Sud, SUd (Excessive suds) Excessive suds is detected during the cycle. The cycle goes into a suds kill routine by filling the tube with water and then tumbling the clothes. If this routine doesn't eliminate the suds, the control displays the Sud code. Use the right amount of high-efficiency (HE) detergent with future loads
17. dE or dE1 (Door lock failure ) Unplug the washer and check the wiring harness connections between the door lock assembly and the main control board. Reconnect any loose wires or replace the wire harness if damaged. If the wire connections are okay, replace the door lock assembly. If the problem continues, replace the main control board
#somaelectricals #samsung #washingmachine #washingmachineerrorcodes
Mujha app ka samjane ka tarika pashand aya.... App bohot he accha ha. Thank you for the information...
Thank you so much sir kal me itni pareshan ho gai thiii meri machine se uspe error 53ka a nahi raha thaa fir aapka video dekha tab sab thik ho gaya hum to pura din machine me he gaya thank you so much sir esi he ache video dala kare hum jeso ki madat ho jato hai
Bro i like your every videos.. Very nice and your explain is very good bro.. Very helpful for home applains techenician
Thank you sir aap bahut accha samjhe Aate Hain 🙏🙏🙏
Thank u so much. I learned more things on your videos . God bless u and your family. U explain very will. I love the way u explain everything. How to open and reconnect all parts and all . Anyone one can learn . Ones again thank u so much sir 😇
I'm so glad!
Thank you Sir. It is very much important information. Great ful to you. Thanks again.
Thanks and welcome
Bhaut badiya sir ji.
Very informtive video..sir my machine showing dE constantly..how can i fix it
De main door is not locking check door lock
Supet vlog i am impressed about ur multi talent person
thank you sir
Thank you sir for nice information....
Welcome
Thank you so much very helpful video
Thank for information really like your all training video it's helpfully in my day to day life at least now I can attend some complaint and do service also in this lockdown period
All the best
((((((
((((((
Nice information sir ji
Sir lg chaina mashine power on nai hota kea mushkil hosakta hy 8 ,kg
Is this good machine? Should I buy it. I hope it won't have problems in Long run???? I am getting it for 18500 rs from samsung website. & Top load ecobubble fully automatic is 16000rs so I am buying front load or should I go top load?
u can buy samsung front load washing machine
@@SomaElectricals thanks.
Sir you do Nice job. Please Sir i have problem with error SD" how Can i fix that ???
SD mean studs stuck in drain motor. clean the drain pump.u find a square cap in front of machine remove it and clean
@@SomaElectricals
You mean front side of machine on the right down side one square box need to open and clean right, that is filter which need to be clean to rectify the sd code error
@@journeyForLife01 yes
@@SomaElectricals Thanks Bro
@@journeyForLife01 it's work for you ?
Nice information....👍
How are you sir. Your everyone video very nice
I'm fine. How r u
Wow...xellent explanation. ...Thank you so much sir
Dienstag
Great job i got this machine and having 4E error when i run with quick29 but when i run it risen and spin water flow is ok. I have tried many times to clean through you instructions donot know what i am missing
remove the detergent box clean the holes with bathroom acid. if the holes are clean. then replace the water valve.
LG frentload washing machine complete fault finding explain sir your video is good
I have a problem with the same washing machine... Jab bhi power on karta hu to water drain pump chalu hi ho jata he aur power off karne ke baad bhi chalu rehta he main supply bandh karne ke baad hi bandh hota he..
machine sense kar raha hai ki machine main pani hai. ek pressure switch ka pipe nikal kar machine start karo
@@SomaElectricals maine sir aapko call kiya tha par aapne receive nahi kiya.
@@SomaElectricals sir pipe nikalne baad machine work kar raha he but inlet se water le raha he aur sath sath water bahar nikal deta he... Rinse+spin me bhi yahi ho raha he water leta he aur drain kar leta he... Agar 17min ka sirf spin karte he to spin cycle complete work hota he.
@@tushar18387 clip bhejo aap whatapp per 9848461408
@@tushar18387 daily kafi calls aatey hain. so answer nahi kar pata hu
Good information sir ji..
Nice video sir ... sir wiring diagram batao na
internet per search karney say mil jayega
Thank you very very much sir
Most welcome
Thanks sir nice video 👍👍👍👍
I Will done machine error code 😍😍😍
Good experience thank you sir good explanation for you
Thanks and welcome
Excellent job SIR
Very nice sir good job
#electricalchannel
good vedeo sir.
Very nice video topic. Could you help me with finding an answer to my HC2 error on my samsung eco bubble? My dryer does not work anymore but can still use washing function.thank you
there is issue with heater. replace it
Good information sir.
Keep watching
5E error code solved bhai
Thank you
welcome
Very nice and helpful video good job
Very nice and good information sir
Excellent video 👍
Aap kaa bahut bahut shukriya ser
Very nice explain Kiya sir thanks for video
Very nice explain
Shukriya sir
Thanks sir for this video
Most welcome
Thanks sir very helpful video
nice video sir
Thanku so much
Most welcome
Thank u sir it’s helpful
Thanks for videos
In India now many IFB front load washing machine available...so please make video about Ifb error and solutions...
sure bro. in coming videos i will cover it
Very good sir
Nice knowledge sir 👌
Thanks and welcome
THANK YOU FOR YOUR PERFECT ENGLISH, NOT WANDER I KNOW HOW TO REPAIR MY WASHER MACHINE IN NOT TIME.
You are welcome
Shukriya.....
tnx sir so nice video
how find out pcb problem......!!!
✋✋✋
Good tiçhing thanks 👍👌👌👍👌👍👍👍👌👍👌👍👍👍
Welcome
Good information sir super
Very useful and very clear
Thank u so much sir
Very nice video 👌👍💥💯
Good job
Thanks
Ohh its wery halp full thanks for video sir
So nice brother ur so nice thx u
Welcome
my problem is a little bit different and I hope that you have the answer the pump keeps running even when the washer is off and there is no error codes on the display whatsoever
try to remove pressure switch pipe and switch on machine
Excellent
Thanks
Thanks for the useful information
Thank you sir. U saved me . GOD bless you
Hello sir please 1 video front load washer k drain pump replacement aur cleaning ka banao
ok jaroor
Sir acid se drm khrab ni hoga..?
thoda dull hota washing main kapadey say phir shine aa jata hai
Super sir
Very Fantastic
Thank you! Cheers!
Good sir. Kindly update more details
sir 5volt presure switchka ac hai ya dc hai?
5 volt DC
@@SomaElectricals thank u very much sir. please aisahi pcb boardse har jagaa janevala volt kithna kithna hai DC ya AC isbareme zaroor ek video upload kariyena sir please.kivki my aapki har ek video dek dekkar 90% kaam sikliyahai.bas ye voltageki knowlegeki comy hai sir please...please
@@SomaElectricals Greetings to u sir.May i request you to upload a video regarding the out going volt from pcb to washing machine( full & semi) parts by mentioning AC or DC. it will be more helpfull for the leaners like me to checkout the parts condition.Thank u sir. Have good day.
Fantastic video
Sir mere pass samsung 8 kg ki machine hai. Ap ne video me batya hai ki tareko mitar kharab hai to machine kabi kabi band ho jati hai fir chalati bhi hai. To iska matlab hai ki tareko mitar kharab nhi. Tareko mitar ka wayar bhi kharab bhi ho sakita hai na sir ya cannetr bhi kharab ho sakta hai sir bataya sir please
motor ko bahar nikal kar check karo
Somo bhai, what acid do you use for descaling and by what concentration ??????
Hydrochloride
Hello sir spring toot gaya hai to usko kaha lagana hai aur woh machine ke konse part se nikla hain
send pic of spring at 9848461408 whatapp
Good video
Very nice
May I ask what if 5d was the sign. What is it??thanks!
check out this link all-errors.com/samsung-washing-machine-error-code-sud/
I got a UC code but only when I ran a test mode, I don't get an error while using the machine, any advice? Appreciated
The UC error indicates power problems. If the washing machine faces an increase or decrease in voltage, then during the washing process it shows an error. The UC error lights up on the washing machine display when the system fixes an abnormal voltage for 30 seconds.
bro Samsung 6kg wf 1600 front loading. while spinning machine is jumping . i changed the full machine body n shokebzer also plz . guide us to very help full
may be machine drum spider is faulty
Thank you for your suggestion. Scaling problem in holes of water line near detergent tray solved my 4E error
Glad it helped
May I know what 2H stand for or 4H is that a hour?
YES ITS hOURS
@@SomaElectricals Thank you so much.
Nice information, mujhe Yaad nai kya error Aaya tha but Mera washing machine kaam nai karra, lock symbol pe hi rehra, child lock toh nai hai Mene check Kiya hai, sumsung washing machine hi hai same Jo Aapne video me dikhaya hai
machine ON kartey hee kya ho raha wo batayain 1st
@@SomaElectricals on karte hi door lock error aara DE
Proper se lock Karne k baad b same error aara, electrician ko bulaye mother board Gaya repair Karna padta bolts😫
Start Karne pe DE error aara please help me out
@@renukavyas8094 door switch check karao. aur door ka hook loose honey say bhee DE error aata hai
Super🙏🙏🙏
Thank you
Thank you 💖
😀
Sir whirlpool top load washing lsp780gp when I on the power and push start button tripping the power on the PCB,,what is the cause.. thanks
issue with PCB. there may be short in pcb
Sir same model machine motor start nahi hora pcb testing batayenge kya
ok
Sir mere front door washing machine me SU and inverse P show kr rha hai, mujhe kya karna hoga....plz reply sir 🙏🏼
what the error code video and pic 9848461408
Agar.inglet wall me splay nahi ara hai to kya pcb ka problem hoga
PCB MAIN PROBLEM HONEY SAY SUPPLY NAHI AATA HAI
@@SomaElectricals sar aap ka number milega
Koi badi problem ho to aap
Pochenge
Good👍
This same model machine not a display type my machine problem was porharam start time after machine drum to speed running to stop after not running and water is coming after water level maintenance and then still not working so check the PCB board I checked then check the to fitting to that's a Sam problem . what is this problem g
check out with technician he can tell
Temperature sensor ka kya price hai sir ji
pura heater kay saat milta hai 1000rs tak ka aayega
Good sir
Keep watching
Fantastic experience,.
What is mean by4C error? Water is filling inside but drum is not spinning while washing. Aftr shows 4C water draining. But spin only mode is working
Solution plz
water should be filled at a specific time in the washing machine. if not filled on time 4c error will show. maybe water coming very slow in machine
1. clean the filter backside where water house connected in the machine ( should clean the filter every 15 DAYS)
2. Maybe the water valve is faulty. ( change it)
3. detergent box water holes may be blocked due to water scaling, remove the detergent box and clean with bathroom acid
4. u can watch this video for 4c how to rectify ruclips.net/video/8CVm6SaVNIM/видео.html
Thanks
Mine is front load mechine. And how can v measure the pressure of water coming
4c error same in top and front.
Sir, without pressure switch pcb kese check kre, whirlpool White Magic pro 720s
pressure jaroori hai check karney kay liye
Thanks sir ji bahut achhi jankari dee h aap ne Kya aap apna no de sakte h
Whatsapp 9848461408
Nice
Sir samsung company ka Washing machine hai aur 5.5 kg WF8558nmw8. Model hai par iskai andar H1 likha aata hai phir stop ho jata aur uskai baad vapis power off kar kai on karna padta hai phir set kar kai spin kai liyai start karna padta hai
Sir ish washing machine mai sai paani bot garam niklta hai
H1 mean heater error. app ko heater change karna padega. nahi tho aap ko cold wash karna padega
Sir samsung ki front load washing machine mein 4E error code a raha hai maine inlet valve pressure switch bhi change kar diya fir bhi kuch der ke baad 4E error a jata hai kya pcb mein problem hogi sir please reply
ye video ek dekho aur isaa karo ruclips.net/video/k0CwJP-z2VY/видео.html
Thank you sir
Sir lg ki top load machine ko jb wash pe chalate h to vo lagatar paani leti rahti h usme kya problem h
ye video dekho ruclips.net/video/k0CwJP-z2VY/видео.html
4e: no water fill
5e: no pump out
3e: tahco error moter
OE: water overflow
1e: water level sensor failure
De: door is fail to lock
Te: temperuare sensor is too high or low
good knowledge.
3h
3h errors ?
Bhai LE1 error aarha hai??
How check Samsung front load motor keeping externally model of machine is wf1650wcw and motor is welling motor model UML5204.01