Well as you would call yourself regular people……it’s the regular people that can’t handle hearing the x rated talk that I muted out….. the language was left out for the children and sounds like you are pretty selfish and need to hear it too despite that.
What a loser. What exactly is a "regular person"? Andy is a person just like everyone else. If you want to act like you're lower than him go for it. You probably are though.
Andy you hit the nail on the head when you named your channel. A little bit of farming, alot of fixing, and never ending fabrication. The kids are such an asset to your operation, the way they are always paying to attention to the equipment.
One of the many things I appreciate not only including the kids but the fact that they recognize and can catch issues before they become major. Not much drama on your videos. Appreciate that so much.
Very good pickup by Nate . Changing those pins to a graded bolt could save untold grief down the track should one let go while working or on the road . Hoses electrics and fert lines - - - - - - etc
Andy, i have found using a cordless impact. They never get nuts and bolts as tight as air impacts. Our a pull bar. I would recommend pulling all 1/2 " fastener and larger with a torque wrench or pull bar. My discovery comes from 4 or 5 costomer truck lug nuts coming loosened. I have done a but load of lug nuts. When i started seeing lose wheels. I had only change one thing. Not Fault finding. Just trying to be a mechanic, Helping a able farmer mechanic. Keep farming the way you do, I love milk with my breakfast.
I've found many places where manufacturers use either floating pins or pins with a cross bolt in one or both sides that allow the bosses that the pins go through to spread. I've had pins made out of 1144 Stressproof steel and threaded on both ends so the pin holds the bosses together.
On my roadside mower there is collars that bolt to the cylinder that limits the travel. Had the same problem with breaking pins and since we added the collars its been fine
Tks for sharing. I've always enjoyed planting corn. It's so nice to be out in the dirt. It's good to get the manure guys out in the fields once in a while. Some of the Farmers here in Michigan already got 1st cutting Hay done. How's that going in New York state?
HEY ANDY YOU HERD THE ONE ABOUT BEST LAID PLANS/ ALEX IS BECOMING VERY GOOD WITH YOU FILMING HER WHILE SARAH STILL SHYS AWAY SUCH A SHAME A SMILE IS SO EASY TO GIVE /GREAT TO HEAR JERROD MOST I HAVE HEARD HIM TALK/ AS FOR NATE HES A BRUTE HE IS BETTER TEMPERED THAN MYSELF FOR I WOULD HAVE TOLD YOU WHERE TO POSITION YOUR CAMERA /ANYHOW GOOD VIDEO AND HAPPY PLANTING CHEERS TO ALL PARTISIPENTS /FORGIVE MY SPELLING PLEASE
Labor is good but someone who cares-can see and prevent problems are unreplaceable that will be family what a family this world needs more of them. “ family farms “ thank you for what y’all do.
Thanks for these wonderful shows andy. You set it up to automatically plant I'm not a farm person at all what happens if you don't do anything at the end of the field Small crash or does it just automatically stop or run you over the hillside I'm just curious thank you
@@guydaubenspeck9206 I hope there are many, not familiar with that area. But too many farmers don't seem to get their kids as involved as Andy does anymore. I was in a graduating class of 495 in 1987.5 were from dairy farms, and only 3 actually worked on the family farm. Only 2 stayed on the farm. We were a semi rural county then.
You know as expensive as these planters are, that shouldn't be happening, friggin rediculous, c'mon John Deere,use better steel or let the engineering department know there shit is breaking an bending, good fix feelas, good work, im down in western Maryland, 40 minutes east of Morgantown West Virginia, thanks for sharing
I learned the hard way about the finger in the hole. Bolt wouldn't go in, so i put my finger in there right before truck suspension fell off the jack. Took a while of me yelling before someone came. Now i can only count to 9 1/2.
Anti sieze or some waterproof grease. Like the shit I use on my motorcycle shafts for axles (shaft drive) Blue colored Amsoil I get. Probably available from several companies. Friggin pins siezed in already!!!???
Wow! Live in Northeast Missouri Tri state Illinois Missouri Iowa. Kaz equipment was bought out by Sydenstricker Noble . Sydenstricker is big in Missouri. 26 dealerships Missouri Illinois. They are expanding! Wow
Nate was getting little frustrated, I did catch the "shut the f$#@ up" comment. He works good under pressure. No tools thrown. I like that fert tube change
sorry but if us regular people don't need to hear the video then i guess we don't need to watch any more have a nice day
Well as you would call yourself regular people……it’s the regular people that can’t handle hearing the x rated talk that I muted out….. the language was left out for the children and sounds like you are pretty selfish and need to hear it too despite that.
Well, bye👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋
Calm down buddy, if there was a reason why there was no audio it was for a reason, also You Tube will only allow so much language.
What a loser. What exactly is a "regular person"? Andy is a person just like everyone else. If you want to act like you're lower than him go for it. You probably are though.
@@FarmingFixingFabricating Figured that would upset someone lol.
Andy you hit the nail on the head when you named your channel. A little bit of farming, alot of fixing, and never ending fabrication. The kids are such an asset to your operation, the way they are always paying to attention to the equipment.
One of the many things I appreciate not only including the kids but the fact that they recognize and can catch issues before they become major.
Not much drama on your videos. Appreciate that so much.
Nate showing he is a valuable member of the team🛠👍
Very good pickup by Nate . Changing those pins to a graded bolt could save untold grief down the track should one let go while working or on the road . Hoses electrics and fert lines - - - - - - etc
Hi Andy !
Hi everybody !
Good job everybody !
Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
Congratulations Charlotte. 😊
It's good that you caught the loose wheel weight early. You have a good ear for details.
Thanks, enjoy the videos !
👍😊
Glad to see you have both planters going. That should speed things along. great video Andy.
“Mucho”good video, as always!
Andy, Nate deserves a bonus in his paycheck for saving the day.
Nice to see Timothy 👀 still rolling on!!😎👍🙂🤠
Nathan, a man of few words. We haven't heard Nathan wise words of wisdom for a while Andy.
She came threw smiling another great video!
Andy this is one of the best videos you done so far
Great job as always Andy
I like what you have done with fuel trailer
Andy great video with the whole gang working together an Alex picking up loose wheel weight
An a great father to see is daughter of to her prom 👍🚜
Thank you Nathan.
Them young women r true troopers !!! Young ladies n their John Deere tractors !! Great stuff
Good crew. Look they got it done already.
Happy Sunday everyone
that new in furrow setup looks so much better
That’s such a massive tractor
Good video team happy planting
Andy, i have found using a cordless impact. They never get nuts and bolts as tight as air impacts. Our a pull bar. I would recommend pulling all 1/2 " fastener and larger with a torque wrench or pull bar. My discovery comes from 4 or 5 costomer truck lug nuts coming loosened. I have done a but load of lug nuts. When i started seeing lose wheels. I had only change one thing.
Not Fault finding. Just trying to be a mechanic, Helping a able farmer mechanic. Keep farming the way you do, I love milk with my breakfast.
Congratulations to Charlotte on graduating High school
Congratulations Charlotte
Just excellent narration here
I've found many places where manufacturers use either floating pins or pins with a cross bolt in one or both sides that allow the bosses that the pins go through to spread. I've had pins made out of 1144 Stressproof steel and threaded on both ends so the pin holds the bosses together.
Haha the cheeep seats heard Nate loud n clear…just stifle the f up. Haha😂😂😂😂
Good Job Andy 🚜🇺🇲👍
That video was great, comical!
“Mucho draw pin” that’s hilarious
" Alex almost lost it "
Doggone, I was gonna come help her look for it. 😭😭 🤣🤣
Gotta be a lot of torque on those big planter draw bars. I’ve seen the case-in ones seem to pull apart near the tractor. Good to see things moving 👍
I figured there was some language being thrown over that clip he was trying to get on.😂
Your videos ROCK Andy
On my roadside mower there is collars that bolt to the cylinder that limits the travel. Had the same problem with breaking pins and since we added the collars its been fine
Nathan says "Hold my beer".
Good luck planting your corn Andy
Love the B&BH t-shirt on Jarred
Your a real ball breaker Andy
I feel bad for Nathan
There is nothing worse than having someone breathing down your neck telling you what to do
Tks for sharing. I've always enjoyed planting corn. It's so nice to be out in the dirt. It's good to get the manure guys out in the fields once in a while. Some of the Farmers here in Michigan already got 1st cutting Hay done. How's that going in New York state?
Alex is definitely the prettiest girl in Syracuse love that girl hard worker
We drill hole and add grease fitting to those cylinders. Seems to stop the binding
I see your using a Milwaukee grease gun. We use the exact on on our farm machinery. Works like a champ! Northern Illinois.
Even though you are running nice equipment you still have occasional issues. Good fixings.
Much wise cracks in this video great😊
HEY ANDY YOU HERD THE ONE ABOUT BEST LAID PLANS/ ALEX IS BECOMING VERY GOOD WITH YOU FILMING HER WHILE SARAH STILL SHYS AWAY SUCH A SHAME A SMILE IS SO EASY TO GIVE /GREAT TO HEAR JERROD MOST I HAVE HEARD HIM TALK/ AS FOR NATE HES A BRUTE HE IS BETTER TEMPERED THAN MYSELF FOR I WOULD HAVE TOLD YOU WHERE TO POSITION YOUR CAMERA /ANYHOW GOOD VIDEO AND HAPPY PLANTING CHEERS TO ALL PARTISIPENTS /FORGIVE MY SPELLING PLEASE
Alex is so adorable 👍👍 I love her smile😊
She knows her stuff.
Alex, Sara and Charlotte are the Queens of farming I love these women they are awesome! good job Andy.
@@M429-sm4yr yes they are all sweethearts
@@tacydit yes she sure does
Great video Andy
Great video. You have an AMAZING family. Congratulations to Charlie.
Great job girls
Labor is good but someone who cares-can see and prevent problems are unreplaceable that will be family what a family this world needs more of them. “ family farms “ thank you for what y’all do.
Beyond fleet maintenance.
Case planters have grease zerks on them pins.
Congratulations Charlotte on Graduating High School 🎉🥳
It seems like the new displays could be able to space both tractors so the last pass would be a full planter width.
Thanks Andy
Maybe Nate and Jerod where having a bit of a "discussion" on the muted parts???
ANDY , SAUD SAME THING ABOUT DON'T PUT YOUR WENNINER IN THAT HOLE. LOL , Farm humor is from are past generations.
Awesome video thanks Andy nice job top team awesome 😎🚜🚜🚜🚜🚜🚜🚜🛠️🔧☀️🌞
Will this new 12 row make names and figures etc in the field like a farmer did a few years ago?
The front of the cylinder could use a grease zerk, the kind where you use a needle.
Should order grade 10 - 12 frame bolts to put in for your folding bolts and lock nuts.
Thanks for these wonderful shows andy. You set it up to automatically plant I'm not a farm person at all what happens if you don't do anything at the end of the field Small crash or does it just automatically stop or run you over the hillside I'm just curious thank you
How many people at the prom had to leave a tractor to get ready in time? I'm betting just Charlotte! 👍👍
You might be surprised that's a pretty heavy agricultural area that they live in up there
@@guydaubenspeck9206 I hope there are many, not familiar with that area. But too many farmers don't seem to get their kids as involved as Andy does anymore. I was in a graduating class of 495 in 1987.5 were from dairy farms, and only 3 actually worked on the family farm. Only 2 stayed on the farm. We were a semi rural county then.
@@MorganOtt-ne1qj yep! Good group of kids he has there
You need to show Nathan how to use the finger snap to get snap ring on
You know as expensive as these planters are, that shouldn't be happening, friggin rediculous, c'mon John Deere,use better steel or let the engineering department know there shit is breaking an bending, good fix feelas, good work, im down in western Maryland, 40 minutes east of Morgantown West Virginia, thanks for sharing
With two planters you can cover a lot of acres in a day quite impressive
Great Vid 👍👍👍👍👍👍
I learned the hard way about the finger in the hole. Bolt wouldn't go in, so i put my finger in there right before truck suspension fell off the jack. Took a while of me yelling before someone came.
Now i can only count to 9 1/2.
Put your finger in a cylinder pin hole, and you'll only be able to count to 9 and a half.
Nate, don't hit Andy in the hand. Want him to be able to sign your paycheck LOL Awesome video as always
You think Andy has time to sign paychecks too?
Mucho good video! 👍🏻
That’s exactly how my grandpa lost the end of his finger. Feeling to align a cylinder pin. It jumped and took off the tip at the back of the nail..
Enjoyed your video have a great day.
Well done
Anti sieze or some waterproof grease. Like the shit I use on my motorcycle shafts for axles (shaft drive) Blue colored Amsoil I get. Probably available from several companies. Friggin pins siezed in already!!!???
Snap rings - they usually go “Bing” and disappear into Outer Mongolia. Many ugly thoughts!
Another name for em is Jesus clips,because when they fly off,you go "jesus, that go"!!
Does Charlotte plan on going to college. Just windering if you going to lose a great little worker
Thanks
The last second of the video 😂😂
I ENJOYED WATCHING THE VIDEO ANDY 😊
Nice video, also like Sarah's shirt 😂
@farmingfixingandfabricating how many gallons does that mas fuel trailer tank hold?
1000
Put cylinder shimes to take up the space so it don’t pull on the fram
See Tim got a.haircut just like your's Andy
Don't know what year your planter is , but the was a PIP through Deere on mine and my buddy's 2021 planters where Deere replaced the pins.
need some train horns on the big tractors
Hi andy when will you replace the tires on that tractor that u used for planting ?
Are all planters the same it seems to me a John deere planter mucho problems
All planters are different and they all take a lot of work to get set up. Always some issue.
Saw a rock picking machine that you might like, USarya Polska.
Andy whats your thoughts about the recent changes with caz equipment?
Wow! Live in Northeast Missouri Tri state Illinois Missouri Iowa. Kaz equipment was bought out by Sydenstricker Noble . Sydenstricker is big in Missouri. 26 dealerships Missouri Illinois. They are expanding! Wow
@paulprigge1209 don't forget Ag Power coming in and they bought out several dealerships here east of KC, I heard they're big down towards Texas
How are the Freightliner and Peterbilt .
Have you considered having a contest for which truck has high repair costs and loss of work costs.
I don't think Andy has many good.words to.say about the Peterbuilt.
Nate was getting little frustrated, I did catch the "shut the f$#@ up" comment. He works good under pressure. No tools thrown. I like that fert tube change
Say all you want about Nate but he gets it done.
Good luck chisel plowing Sarah
How deep do you plant corn looks deeper than mine am I missing out
Are you the bigs milk production in New York state.?
No
My dad called the snap rings Jesus ring as when they flew out , oh Jesus!!!!!!!!!!
Tim kinda looked like Biden with his sunglasses on, about the time when you started talking about the pin.