I looked at the bottom of the relays and all but one didn't have a little thing poking out in the center. I gave the relay a couple good taps with the butt of my screwdriver and it works for now. Probably going to have to replace the relay though.
THE GFI IS TO PROTECT THE POOL LIGHTS AND THE CONTROL BOARD YOU HAVE A BAD PUMP RELAY OR A BAD PUMP BREAKER BUT YOU HAVE TO TEST THE POWER COMING IN AND OUT .
check electricity before and after the breaker. if you getting power before and not after that means bad breaker and if you not getting any power at all check your main breaker at the house.fallow the voltage (water)
I had the same issue. I traced the wires back to the box in the house. There was 2 brackers for the Plug. Togather it make 220 v. (110 +110). One of my brackers was bad. It was in the open but it was bad. Check to see if you are getting power coming out of the breaker. Hope this helps.
always go to power source first. check power to sub panel. if no power then your issue is with 100 amp breaker. if you have power to sub panel..problem is with in the sub panel breakers. as with this I can tell no power is going to the sub panel.
so how do you fix your problem? I have similar problem, that the CFI outlet is no power, and my pool and spa light was gone,,, ( the different between you and me is my pump is ok, still working,, ) just the pool and spa light was gone,,, can you tell me how do you fix it,,, change a new CFI outlet? or is it because of the control panel? thank you
I looked at the bottom of the relays and all but one didn't have a little thing poking out in the center. I gave the relay a couple good taps with the butt of my screwdriver and it works for now. Probably going to have to replace the relay though.
Def a relay
THE GFI IS TO PROTECT THE POOL LIGHTS AND THE CONTROL BOARD YOU HAVE A BAD PUMP RELAY OR A BAD PUMP BREAKER BUT YOU HAVE TO TEST THE POWER COMING IN AND OUT .
How do you test these? What tool do you use?
check electricity before and after the breaker. if you getting power before and not after that means bad breaker and if you not getting any power at all check your main breaker at the house.fallow the voltage (water)
I had the same issue. I traced the wires back to the box in the house.
There was 2 brackers for the Plug. Togather it make 220 v. (110 +110).
One of my brackers was bad. It was in the open but it was bad.
Check to see if you are getting power coming out of the breaker.
Hope this helps.
Can you explain this better? What are brackers? I have power to the GFI outlet, but no power to the display panel
I think you should call an actual electrician.. Pretty simple stuff lol
Listen, it may be a simple fix, that's what he's trying to find out before he get's robbed by an overpriced electrician
@@leor.salazar4521 seems you are giving bad advise.why would you do you own electrical work? but not do plumbing?
call an electrician .stay safe.
always go to power source first. check power to sub panel. if no power then your issue is with 100 amp breaker. if you have power to sub panel..problem is with in the sub panel breakers. as with this I can tell no power is going to the sub panel.
so how do you fix your problem?
I have similar problem, that the CFI outlet is no power, and my pool and spa light was gone,,, ( the different between you and me is my pump is ok, still working,, ) just the pool and spa light was gone,,,
can you tell me how do you fix it,,, change a new CFI outlet? or is it because of the control panel?
thank you
Jason Chen I have the same issue. Did you ever figure it out?
Dude sell your probe to an electrician that knows how to use it. Stay away from power panels.
Bad GFI of bad relay
yea why would you put a GFCI on the load side of a relay?
seems it should be on the line side if not at all,and on its own breaker.