Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Nice! I like how you used the lathe for it. 56mm aluminum plug to spin it down
It was painful watching you trying to tap the first hole.
So falta ocomentário do #cabecasbikes 🇧🇷😁
É verdade mano
Hubieras hecho eso medir con el cigüeñal puesto y pistón pero taladrar sin el cigüeñal y hacer la rosca sin el cigüeñal creo que es más fácil
Tu por aquí?
não vai aguentar o cilindro vc retirou muito material da base vai quebrar vc deveria aplainar o bloco não o cilindro uma dica
Absolutely beautiful
You never show it running brother , I want to see the finish builf
Nice having the machinery 👍👍
Good work
Did you remove any material from the cylinder surface or the case's surface?
Yes, from the cylinder.
How about the intake port timing? With a 40mm stroke it gets around 190°. Too high. How did you work that out? ✌️
its actually about 38mm of stroke. The stock MS660 is 40mm
Nice and interesting build engine; wich type of rod on that engine did you use on that project??
I do not really remember, it's something with 40
Sou tem um problema a gaiola tem que ser substituída por rolamento, porque está estragando toda hora
Yamaha Jog only
Can you make me one
Спасибо
Your bearings are full of shavings,,not good
He will clean them
эта затея безсмысленна, как и установка поршня локомотива на мотоцикл
Where can one get that exhaust adapter ?
It is an adapter for the ms070 carburetor, it's DIY
How big power engine?
98cc
mechaphile
J
Nice! I like how you used the lathe for it. 56mm aluminum plug to spin it down
It was painful watching you trying to tap the first hole.
So falta ocomentário do #cabecasbikes 🇧🇷😁
É verdade mano
Hubieras hecho eso medir con el cigüeñal puesto y pistón pero taladrar sin el cigüeñal y hacer la rosca sin el cigüeñal creo que es más fácil
Tu por aquí?
não vai aguentar o cilindro vc retirou muito material da base vai quebrar vc deveria aplainar o bloco não o cilindro uma dica
Absolutely beautiful
You never show it running brother , I want to see the finish builf
Nice having the machinery 👍👍
Good work
Did you remove any material from the cylinder surface or the case's surface?
Yes, from the cylinder.
How about the intake port timing? With a 40mm stroke it gets around 190°. Too high. How did you work that out? ✌️
its actually about 38mm of stroke. The stock MS660 is 40mm
Nice and interesting build engine; wich type of rod on that engine did you use on that project??
I do not really remember, it's something with 40
Sou tem um problema a gaiola tem que ser substituída por rolamento, porque está estragando toda hora
Yamaha Jog only
Can you make me one
Спасибо
Your bearings are full of shavings,,not good
He will clean them
эта затея безсмысленна, как и установка поршня локомотива на мотоцикл
Where can one get that exhaust adapter ?
It is an adapter for the ms070 carburetor, it's DIY
How big power engine?
98cc
mechaphile
J