Another detailed guide to what’s what with the BMW, also nukes the fuse, which you have to remove in bits with needle noses. Great video making doing these bits and bobs simplicity.
Does the weatherstrip tuck under or go over the panel after reassembly? Looks like it’s over the panel in your clip, but not sure! Thanks for the informative video, though!
The last one u didn’t include is on the left hand side, roughly where the bonnet release is but opposite side (for rhd cars) and the fuse box is built into the bcm but you have to take off a little cover to see the fuses
Hey :) I have been trying to find time to make a video on the FEM :) I hope I don't snap any clips with removing the door sill plastic. lol :) cheers Jamie :) Matt
Matt my fan will not run to cool- it only runs when the AC is turned on, ive been told its poss the relay ( fan ) or the fan sensor module- ( not the water pump as ive checked & its working) thank you in advance
On my f20 windshield washer does not work, rear works fine. Want to check the fuse if you know which one is it. If I am reading the diagram correct there is no number by the symbol for windscreen washer just a car on a lift which i presume means take it to the dealer. BTW nice video. Subscried.
Hey, I’m sorry I just saw your message. I’ll jump on the computer and try and work it out for you. There is a chance that it will be in the front electronic module. I need to make a video for that one :)
Same issue here Tom. Pump for the front windscreen makes no attempt to rotate so most likely a power issue but the only symbol for washer is the BMW service symbol so unable to determine which fuse to test for continuity.
Hi matt, I'm trying to fit a parking dash cam, can you tell me which fuses are permanent live (without ignition) and would be the most sensible to use for it? Don't worry I understand fitting it is all at my own risk! TIA
C3110player hello :) I had to check google for this one as I just use the cigarette lighter for mine, and as you know the power for the cigarette lighter cuts off after a certain time. This was on a 1 series forum. www.babybmw.net/forum/viewtopic.php?t=112345
@@mattsbeamer no sweat, I got a E87, wife drives a F20 and recently shes been getting drive train error. Saw your other vid on problems you had with that error, it was helpful however im leaning towards ruling out small possible reasons for it 1st and saw some mention fuel pump relay replacement.
Hello i have a series 1 f20 and when trying to change the trunk light bulb ( wanted an led) i made a short , now it does light at all i checked all the trunk fuses box but all of them seem to be fine, any idea what am i doing wrong? Thank you!!!
Здорова, не могли бы вы мне подсказать какой предохранителеь для стеклоомыватель у меня вода не бризгает а дворники работают . С задний стеклоомывалеть бризгает воду Заранне спасибо 🙈
Hi there, need help on FEM / ICM = error i getting is D0157A kept saying the over threshold voltage, and battery voltage over. so i using ista was lead to the front near the leg room there FEM unit. and i using the software to dignose.. seems like all ok. but i do not know what to do next. im good in hardware replacement but regards on wiring and this .. a bit not good at it
after dig dig . i notice last guy whom install my battery , never help me register when i try to find this problem so now i had register. for past a week but i never check is the error still there. some said if no register the battery will keep overcharging.
Hello. My horn stopped working. Id say might be a fuse or relay, any idea where i can find the fuse/relay for my horns and how to access it? Thank you!
Hello, I m sorry I didn't comment before. Someone else asked today. I will make a video. But until then, this was my reply... Your FEM is on the same side of the cars your glove box. It is behind all the panel work related to the A-pillar. Here it is when it is all been moved away... www.newtis.info/tisv2/a/en/f20-116i-sha/components-connectors/components/components-with-f/f14-fuse/KQ5WNSdR Remember this picture in the link is a RHD car. Some of the pictures you will see may show the opposite side of the car but ignore that, it saves them doing the instructions twice. First of all, make sure the car is unlocked, and disconnect the negative battery terminal (if you should want to remove the FEM fully). Then go to the side of the FEM, and remove the door strip... www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/EPcpmHaY You are recommended to use a trim removal tool. Then you will need to remove the trim below the glove box. www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/H0fUsHYm be aware of anything like lights or the 12v power socket before, don't damage any wires. Then you will need to remove the side panel on the A-pillar, but you also need to pull away the rubber strip... www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/H7OPTEZo When it comes to reinstalling this later, make sure the trim is sitting right... www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/8HthLMFy For the next picture link, just pay attention to the top picture. you will need to remove that little cover. When that is removed you will see the little fuses. Its clearer on this link. www.newtis.info/tisv2/a/en/f20-116i-sha/wiring-functional-info/body/system-analyses/lin-master/GJ2nnLIK going by this picture it shows you that the fuse for the horn (fanfare) is number 14 (on this diagram it is the blue fuse). Make sure you replace it with the same type of fuse, and hopefully it should work. As you aren't disconnecting the battery it will be easy to test. Refitting is in reverse :) I hope this helps and good luck. I need to do a video now lol :)
I have never bought BMW fuses for my old BMWs but as electrics are becoming more complex I would go to the dealership or a company who sells Littelfuse fuses. They used to use Pudenz fuses, but Littelfuse bought out the company. :)
Zachariah M Rahman hey, I will make a video soon. But I think it’s located in the FEM I think fuse f14. www.newtis.info/tisv2/a/en/f20-118i-sha/GS4sTOpl
@@zmrahman3288 ok buddy, ill find some links from BMW, and send him on here. I use this site to make sure all the specs and that are ok before I post a video. I'll be a few mins.
The best ever tutorial that I have ever seen, Thank you so much and all the best!
Thank you so much!!
One of the best tutorials that i've seen.
Ovidiu Alexandru wow! Thanks for such a great comment :)
Agree!
Another detailed guide to what’s what with the BMW, also nukes the fuse, which you have to remove in bits with needle noses. Great video making doing these bits and bobs simplicity.
Thank you once again Ben. It took ages, I think it took longer than my x6 video lol. I enjoy making most of them. Thank you once again
mattsbeamer it’s worth the time and your welcome
Hay Matt glad to see you back mate hope you are well, another great video cheers
Bridge Burner thank you mate!! It’s good to see another comment from you :D
Very
Thank you.
The help has been tightened.
최미진 I’m very glad this video helped you. Thanks for letting me know :)
Thanks a lot for the tips. Greetings from Brazil.
Thanks for the comment. I’m glad it helped. Have a great week :)
Does the weatherstrip tuck under or go over the panel after reassembly? Looks like it’s over the panel in your clip, but not sure! Thanks for the informative video, though!
Great video! Thanks
You're welcome!
Very important video. Thank you
Matilda Ivanova thank you :D
Another great video👌👍🏾
Mxolisi Toti thank you :D
Hi , good video, do you know what fuse can I use to connect gps/tracker to permanent plus+ , thanks
That’s a good question, I shall work it out. )
The last one u didn’t include is on the left hand side, roughly where the bonnet release is but opposite side (for rhd cars) and the fuse box is built into the bcm but you have to take off a little cover to see the fuses
Only took me 2 hours to find it...
Hey :) I have been trying to find time to make a video on the FEM :) I hope I don't snap any clips with removing the door sill plastic. lol :) cheers Jamie :)
Matt
Matt my fan will not run to cool- it only runs when the AC is turned on, ive been told its poss the relay ( fan ) or the fan sensor module- ( not the water pump as ive checked & its working) thank you in advance
mi 118i 2014 dejo de sonar el claxon ... sabes si es de fusible?
Great video! My USB port has stopped working, which fuse do you think that might fall under? Thanks!
Thank you so much. I will try and work it would for you. Mine doesn’t have a usb. Where is it located on yours?
Merci très bonne vidéo savez vous quelle est le fusible pour la centralisation ?
What fuse numbers are live only when ignition is on in the engine bay fuse box? need a switched live in the engine bay area.
On my f20 windshield washer does not work, rear works fine. Want to check the fuse if you know which one is it. If I am reading the diagram correct there is no number by the symbol for windscreen washer just a car on a lift which i presume means take it to the dealer. BTW nice video. Subscried.
Hey, I’m sorry I just saw your message. I’ll jump on the computer and try and work it out for you. There is a chance that it will be in the front electronic module. I need to make a video for that one :)
@@mattsbeamer pump works with the front vipers so it has to be connected on that circuit, somehow.
Tom Zezelic hi, I have the same issue, did you get a fix?
mattsbeamer hi Matt, did you look at this? I am having the same issue
Same issue here Tom. Pump for the front windscreen makes no attempt to rotate so most likely a power issue but the only symbol for washer is the BMW service symbol so unable to determine which fuse to test for continuity.
Hi matt, I'm trying to fit a parking dash cam, can you tell me which fuses are permanent live (without ignition) and would be the most sensible to use for it? Don't worry I understand fitting it is all at my own risk! TIA
C3110player hello :) I had to check google for this one as I just use the cigarette lighter for mine, and as you know the power for the cigarette lighter cuts off after a certain time.
This was on a 1 series forum. www.babybmw.net/forum/viewtopic.php?t=112345
A video of fuel pump relay faults and where it’s located, how to remove the trim and replacing it would be appreciated.
Hey, I’ll see what I can do. I may need to check it all over as I haven’t driven my f20 since 2021. :’(
@@mattsbeamer no sweat, I got a E87, wife drives a F20 and recently shes been getting drive train error. Saw your other vid on problems you had with that error, it was helpful however im leaning towards ruling out small possible reasons for it 1st and saw some mention fuel pump relay replacement.
Hello i have a series 1 f20 and when trying to change the trunk light bulb ( wanted an led) i made a short , now it does light at all i checked all the trunk fuses box but all of them seem to be fine, any idea what am i doing wrong? Thank you!!!
Excellent vidio as always ,very well explained 👍
linda pet thank you Linda :)
Здорова,
не могли бы вы мне подсказать какой предохранителеь для стеклоомыватель у меня вода не бризгает а дворники работают .
С задний стеклоомывалеть бризгает воду
Заранне спасибо 🙈
very thorough. well done
Glad it was helpful! I need to do a FEM video soon :) cheers :)
Perfect 💯💪👏👏👏
Thank you :)
The best one !!!
Thank you 🙏
Trying to find fuse 80 for the rear demister. Diagram shows it inside the o/s rear wheel arch but I can't get to it.
Any ideas?! (116i 2012)
Hey, from about 4:38 I show how to access the REM :) hopefully it helps :) cheers
@@mattsbeamer got it. Good mam, thank you 😊. Do you happen to know where the relays are for the REM too?
You’re welcome :) Any other questions let me know :)
Hallo, i have a question, wich fuse is for the USB Slot,? Thank you
Hello, I shall have a look for you when I get home :)
@@mattsbeamer trank you
Hi, do you know where the Parking Distance Control Module for this vehicle is ? Im really struggling to find it !
Hi, I think that it is part of the REM system. :)
Hi there, need help on FEM / ICM = error i getting is D0157A kept saying the over threshold voltage, and battery voltage over.
so i using ista was lead to the front near the leg room there FEM unit. and i using the software to dignose.. seems like all ok. but i do not know what to do next. im good in hardware replacement but regards on wiring and this .. a bit not good at it
after dig dig . i notice last guy whom install my battery , never help me register when i try to find this problem so now i had register. for past a week but i never check is the error still there. some said if no register the battery will keep overcharging.
Hello. My horn stopped working. Id say might be a fuse or relay, any idea where i can find the fuse/relay for my horns and how to access it? Thank you!
Hello, I m sorry I didn't comment before.
Someone else asked today. I will make a video. But until then, this was my reply...
Your FEM is on the same side of the cars your glove box. It is behind all the panel work related to the A-pillar.
Here it is when it is all been moved away...
www.newtis.info/tisv2/a/en/f20-116i-sha/components-connectors/components/components-with-f/f14-fuse/KQ5WNSdR
Remember this picture in the link is a RHD car.
Some of the pictures you will see may show the opposite side of the car but ignore that, it saves them doing the instructions twice.
First of all, make sure the car is unlocked, and disconnect the negative battery terminal (if you should want to remove the FEM fully).
Then go to the side of the FEM, and remove the door strip...
www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/EPcpmHaY You are recommended to use a trim removal tool.
Then you will need to remove the trim below the glove box. www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/H0fUsHYm be aware of anything like lights or the 12v power socket before, don't damage any wires.
Then you will need to remove the side panel on the A-pillar, but you also need to pull away the rubber strip...
www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/H7OPTEZo
When it comes to reinstalling this later, make sure the trim is sitting right... www.newtis.info/tisv2/a/en/f20-116i-sha/repair-manuals/61-general-vehicle-electrical-system/61-35-control-units-modules/8HthLMFy
For the next picture link, just pay attention to the top picture. you will need to remove that little cover.
When that is removed you will see the little fuses.
Its clearer on this link.
www.newtis.info/tisv2/a/en/f20-116i-sha/wiring-functional-info/body/system-analyses/lin-master/GJ2nnLIK
going by this picture it shows you that the fuse for the horn (fanfare) is number 14 (on this diagram it is the blue fuse). Make sure you replace it with the same type of fuse, and hopefully it should work. As you aren't disconnecting the battery it will be easy to test.
Refitting is in reverse :)
I hope this helps and good luck. I need to do a video now lol :)
Which fuse it for the headlights
I have problem whit my alarm siren no sound know do you have any idea what prblm
Could you do a video tutorial of how to fit rear pdc
Hey, that is a great idea, I’ll look into it. The thing is, my car doesn’t have idrive.
@@mattsbeamer I have checked the whole RUclips there isn’t a single video on how to retrofit rear pdc sensors on a f20
Does anyone know where the dipped beam fuse is or the fuse I need for it and where it is located?
Please which number of fiuse is the liquid fluid pomp ?
Hello, Sorry, Do you mean the windscreen washer fluid pump?
Hey Matt. Do you know where to get BMW’s genuine fuses from?
I have never bought BMW fuses for my old BMWs but as electrics are becoming more complex I would go to the dealership or a company who sells Littelfuse fuses. They used to use Pudenz fuses, but Littelfuse bought out the company. :)
@@mattsbeamer awesome cheers Matt. Decided to go with those streetwise ones in the end.
Hey! Can you tell me how to get to the Car Horn fuse???
Zachariah M Rahman hey, I will make a video soon. But I think it’s located in the FEM I think fuse f14. www.newtis.info/tisv2/a/en/f20-118i-sha/GS4sTOpl
@@mattsbeamer awesome cheers. Any idea for to get to the FEM? Haha
Zachariah M Rahman is your car LHD or RHD
@@mattsbeamer RHD
@@zmrahman3288 ok buddy, ill find some links from BMW, and send him on here. I use this site to make sure all the specs and that are ok before I post a video. I'll be a few mins.