Hi. friend. To make this unit work properly, you need to note these following things: 1. Each PC need to connect 2 DP cables +1 USB cable to get video signal and USB signal;2. After connecting the KVM, you should press " Windows+P" to choose extend or duplicate mode; 3. To get the best effect, the DP cables shouldn't exceed 1.5M,; You could follow the above methods to find out the root of your proble. Hope these can help you solve it.
Yes. But what you need to note is that all the devices should be connected to the same layer. The monitor that connect to the OUT A can only display screen from INPUT A1 or INPUT A2, OUT B can only display screen from INPUT B1 or INPUT B2. Besides this, for your laptop HDMI pc1, you need to purchase an active HDMI to displayport adapter with external USB power. Hope these can help you. Dear my friend.
i have one that can connect 2 monitors and 3 pc's via hdmi. Problem is everytime the monitor setup is nog saved. i get errors like out of range or no hdmi signal. And i need to put the kceve switch off and on and then or it works or i need to reboot. it's really annoying. My setup is also 1 laptop connected to 2 monitors. And 1 PC connected to the same monitors. Both use hdmi cables and usb cable that were in the box. Is there also any software needed to function right or make it function? The laptop has only 1 hdmi port but i also connected a adapter on the laptop usb c 3.0 where i can connect another hdmi cable.
So it forces you to connect that usb which is what I don’t like. My personal opinion is that the signal should be fed to this device and therefore only require 1 hdmi or dp cable to the pc/laptop. It sucks that it requires the usb and multiple hdmi/dp cables. Plus on top of all that it still requires power from another cable! Just my opinion but I wish they would rework that to make those improvements where the usb or display ports/hdmi serves as power and maie this simpler.
@@markitoss i really do not understand that it works like this. The switch also comes with a power supply cable and i thought maybe the power supply cable is a must but it does not make any difference. I am trying to figure out that if my cable setup is not good or is the switch just not good for the goal i want to achieve. 😂 But the goal is simple switch between a pc and laptop on 2 monitors. The maingoal i bought the switch for😂
I have this. I need to be able to display both PCs at the same time on each seperate monitor. I can switch between both PCs fine on both monitors, but I need to be able to have 1 PC on one monitor and another PC on another monitor. How can I accomplish this?
In this way, you can get only one screen from each PC, you can use it as a 2 in 1 out KVM switch. And you need to connect one PC to INPUT A and the other PC to INPUT B, becuase output A can only display content from input A, similarly output B can only display content from input B. For HDMI PC, you need to prepare a HDMI to DP adapter with USB power cord.If you want to get 2 screens from each PC, it won't work.
I meed to connect 2laptops on same external monitor. Lenovo g50 80 and hp ProBook. None of them has a usb c port. Can u recommend which kvm model should I use? Do i need any adaptor? Which one? Kindly suggest. I don't need to transfer data between pcs only need to display on monitor one at a time and control the displayed system with same keyboard mouse.
@@saleskceve4544other person was silent but I got same issue my laptop got one hdmi, one usb 3.0 and two USB c opening and trying to work out how I can use this switch with it.
I bought it, and I have a problem, 2 monitors, 1 dp and 1 hdmi, all dp cables except 2, one connecting monitor hdmi to kvm with adapter that converts dp to hdmi, the problem is that one pc has all dp and it's working with the hdmi monitor and the other cable is kvm to laptop, with the same converter, dp to hdmi
Hi. friend. Thanks for your attention. To provide you the most suitable solution, could you please tell me what kind of interfaces your laptop and monitors have?
You mean your monitor only has HDMI port?If so, you could use Active Displayport to HDMI cable for your HDMI monitor, But please note that the direction of the DP to HDMI converter and it must be active rather than passive.Otherwise it will affect the performance.
For normal USB devices, you don't need to connect the 5V power supply. The KVM can get power from the USB cables which connect the PC and the KVM. For some high power consumption USB devices, you could connect the external power cable to make the USB recognition more stable.
I often have the annoying symptom that the screen stays black when I switch between the PC's. Then I have to restart the PC until it's working well. It's connect to one dockingstation and to a normal desktop PC. What do you think? Do you have any recommendations to fix this issue. It's like that one monitor is connected via DP and one via HDMI.
@@saleskceve4544 Thank you for your reply. I have the following situation: I have this model in the video, but with 1 x DP and 1 x HDMI. I have connected both montiors with 1 x DP cable and 1 x HDMI cable. I did the same cabling for the Dockingstation of my notebook. I never had issues with the Dockingstation. And then I did the exactly same cabling for my desktop pc directly into the graphics card (RTX 2060 Super). And only for the desktop pc I have sporadic the issue that when I'm going to start the PC that it doesn't work properly. It can be descriped like this: the monitor shortly regnognize a signal, but then directly went into black. I have to restart the PC one or two times until it's working as it should be. Sometimes it's always working fine without issues. But then I have above descriped situation. I never had this issue as my desktop pc was directly connected to the monitors.
@@DarkArchery1511 Friend. to solve your problem, you could try replacing another standard DP 1.4 cables within 1.5 meters that connect your deskptop and the KVM.
Hi, thanks for the vid. Dumb question : How do you display PC1 on Screen 1 and PC 2 and Screen 2 ? Both computers at the same time, is it possible? It is not shown on the vid :(
Hi. Friend.Thanks for your time. This model doesn't support display screens from PC1 and PC2 at the same time. But we have another model which can meet your requirement. You could refer to ASIN B0CJLQNX2N
Nope. Dear friend. This KVM switch has 2 independent circuit board. You could also use it for 2 computers 1 monitor kvm switch. For example, plug your 2 computers into INOUT A1 and INPUT A2, plug the monitor into OUT A, OR plug your 2 computers into INOUT B1 and INPUT B2, plug the monitor into OUT B.
In this way, you can share 1 monitor and 1 set of keyboard mouse between 2 computers. Please note that the USB cable should be connected to the relevant USB port to make the USB devices work properly.
I haven't taken a video for 3 computers 3 monitors model, but you could tell me what information you would like to know, I will take a video according to your requirements.😁
I have a curious about If i connect 1 PC with DP 2 Cable to 2 Monitor.And 1 Macbook Pro M1 Pro with IVanky Max 1 Docking Station ( With capable to extend 2 Monitor without using DisplayLink) By Using 2 port Thunderbolt 4 and connect from Dock to KVM switch. Via USB Type-C to DP to KVM and then Connect from KVM to 2 Monitor Via DP port. will it work? Or can i have an email to direct question by any chance?
Hi. friend.Thanks for yur question. This model in the video only support extended mode and duplicate mode, if you are looking for a kvm switch which support 1 PC 1 monitor, the other PC to other monitor, you could refer to this one in the below link: ruclips.net/video/mJdGq-DWHMg/видео.html
Hi. friend. we are using standard DP 1.4 chip. So the highest resolution supoorted by the KVM is 3840*1440@144Hz, so there is no problem with 3440*1440@180Hz, but please make sure that the DP cables you are using are also standard DP 1.4 cables.
Yes. It works. But please note that M2 chip doesn't support extend mode unless you use Displaylink Docking. You just need to connect 2 DP cables+1 USB cable from your MAC M2 and desktop to the relevant ports on the KVM, you can easily switch between the 2 signals to share 2 monitors and 4 USB devices.
Hello, can you make sure if this support 2x 1440p 165hz, with a specific monitor Acer Predator XB271HU. Don't want to order and when it arrives I find out it doesnt work. Thank you
Hi. Dear friend Thanks for your question, This is Molly. To be honest, we didn't test 165Hz with ultra-wide monitor. The highest resolution we tested is 3840*2160@144Hz using high quality standard DP 1.4 cable wwithin 1.5M.Theoretically it will support 2560*1440@165Hz, but I am sorry that I can't give you exact answer. If you are willing have a test and you are in Austrialian, you could purchase one and then send me a message to our email address printed on the back of the KVM, I will apply a special discount for you. Your help would be much apperciate.
Hi mate, amazing video, it help me a lot ! One quick question, I have a pc with 2 dp and all fine there, but my laptop have only one hdmi. Should I buy a dock for my laptop? Would that work? Thanks !!!
Hi. friend. Thanks for your attention. To make your laptop work normally, you need to make sure there are 2 video output interface on your laptop. you could check if your laptop has another video output ports like USB-C type shit. If it has USB-C port, you could use the KVM with a USB-C docking which has 2 DP ports .If it only has 1 HDMI port, it may not work as your expect.
Awesome @@saleskceve4544 Thanks for your help!! I'm just waiting for the mini USB to DP adapter to make it work. In the meantime, I've been running some tests, and is it possible that an HDMI to DP cable doesn't work properly? I have a DP cable and an HDMI to DP cable in the KVM, but it doesn't give a signal to the HDMI screen; the DP screen is just fine.
@@UFRANSA No worries. My friend. If you want to test HDMI to DP adapter, you need to note that you need to use an HDMI to DP cable with external USB power cable. Otherwise, it won't work because of poor compatibility.
@@saleskceve4544 for the cables hdmi to dp I understand, let me know if you have one so I can buy the same. But for the usb-c to dp I will need an external USB power cable? Or is it only for hdmi to dp cable? Thanks a lot mate really !!
@@UFRANSA If your want to connnect your laptop through HDMI interface to the DP input interface on the KVM, you need to use HDMI to Displayport adapter with external USB power cable, AS for the USB-C to DP cable, usually it built-in chip which support power supply, so it doesn't need external power.
Do you mean your PC output interface is HDMI port, right? If so, you need to use a HDMI to DP converter with USB power supply not DP to HDMI converter. Besides this, what you need to note is that the resolution depends on what your converter supports.
@@adamm6733 As matter of in fact, for Displayport devices, the highest resolution supported by the KVM is 7680*4320@30Hz or 3840*2160@144Hz if you use high quality standard DP 1.4 cable. So 3840*2160@120Hz is compatible.
of course. Dear. You can connect a 5V/2A adapter to the KVM to power the KVM. This will make the USB recignition more stable. But if you also want to make the USB devices work normally, you also need to connect the USB cable between the PC and the KVM.
Yes, dear friend. This unit works with your set up. But it is not the best option for you. Because you will need to purchase some converters . Since your laptop has 1 Displayport and 1 HDMI port, your 2 monitors are also have DIsplayport and HDMI port, so you could refer to this model amzn.to/3SU7SoN. This model is mainly designed for those users who have computers and monitors with 1 DP and 1 HDMI port. Hope these can help you.
@@briangreene4277 Sorry. Friend. I am not sure what you mean by that. Do you mean you only want to connect 1 laptop to 2 monitors? If so, you only need to connect your laptop to your 2 monitors directly through the Displayport and HDMI port.
Yes. It supports. But you need to prepare a USB-C docking with 2 DP ports if you want to output 2 screens. Besides this, M1/M2 chip doesn't support extend screen unless you have a Displaylink USB-C docking.
Was that terrible music chosen to scare people away from this video? Had to watch on mute, thanks for demo though. I have been looking for a setup tutorial for this switch forever.
Uh, I am sorry to scare you .I just think this background music is relax and cheerful. Is there any special scene for this music or something special meaning type shit? I would be glad to know more difference between your country and ours.
Hi. Friend To make keyboard mouse swith between your PCs, you need to connect the USB cable from each PC to the corresponding port on the back of the KVM. You could check it out if you have connected the USB cable.correctly.
This solution is too complicated, especially because 6 HDMI cables are needed, 2 of which are connected to the monitor, and each computer needs to be connected to 2 HDMI cables. If the laptop does not have an HDMI port, it also needs to be equipped with an expansion dock. We now have a new solution that only requires 2 HDMI cables to connect the monitor, saving users 4 HDMI cables and 2 expansion docks. Bloggers, please contact me if you need it. We are a manufacturing factory and can produce it for you. Friends in need can also find me. Welcome to leave a message
for those wondering, no it doesnt work, I have one and it doesn't display anything. Tested with dual 1080p 144hz monitors.
Hi. friend. To make this unit work properly, you need to note these following things: 1. Each PC need to connect 2 DP cables +1 USB cable to get video signal and USB signal;2. After connecting the KVM, you should press " Windows+P" to choose extend or duplicate mode; 3. To get the best effect, the DP cables shouldn't exceed 1.5M,; You could follow the above methods to find out the root of your proble. Hope these can help you solve it.
Hi, I have laptop HDMI pc1 In and PC with Displayport pc2 In. Will this work if i only use the display port output to 1 monitor?
Yes. But what you need to note is that all the devices should be connected to the same layer. The monitor that connect to the OUT A can only display screen from INPUT A1 or INPUT A2, OUT B can only display screen from INPUT B1 or INPUT B2. Besides this, for your laptop HDMI pc1, you need to purchase an active HDMI to displayport adapter with external USB power. Hope these can help you. Dear my friend.
Can these be left on all the time or do they need to be turned off when not in use?
i have one that can connect 2 monitors and 3 pc's via hdmi. Problem is everytime the monitor setup is nog saved. i get errors like out of range or no hdmi signal. And i need to put the kceve switch off and on and then or it works or i need to reboot. it's really annoying. My setup is also 1 laptop connected to 2 monitors. And 1 PC connected to the same monitors. Both use hdmi cables and usb cable that were in the box. Is there also any software needed to function right or make it function? The laptop has only 1 hdmi port but i also connected a adapter on the laptop usb c 3.0 where i can connect another hdmi cable.
So it forces you to connect that usb which is what I don’t like. My personal opinion is that the signal should be fed to this device and therefore only require 1 hdmi or dp cable to the pc/laptop. It sucks that it requires the usb and multiple hdmi/dp cables. Plus on top of all that it still requires power from another cable! Just my opinion but I wish they would rework that to make those improvements where the usb or display ports/hdmi serves as power and maie this simpler.
@@markitoss i really do not understand that it works like this. The switch also comes with a power supply cable and i thought maybe the power supply cable is a must but it does not make any difference. I am trying to figure out that if my cable setup is not good or is the switch just not good for the goal i want to achieve. 😂 But the goal is simple switch between a pc and laptop on 2 monitors. The maingoal i bought the switch for😂
@@MarocTeamCod I am unsure, I hope they comment back but mine did not turn on unless I plugged the usb in and an extra dp to my pc
Dear friend. Would you like to share with me which model you purchased?
@@saleskceve4544 yes i have the kceve dual display 3.0 hdmi
I have this. I need to be able to display both PCs at the same time on each seperate monitor. I can switch between both PCs fine on both monitors, but I need to be able to have 1 PC on one monitor and another PC on another monitor. How can I accomplish this?
Hi according to your video, it needs 2 input cords. Can i just use one hdmi for one pc and one DP for another pc?
In this way, you can get only one screen from each PC, you can use it as a 2 in 1 out KVM switch. And you need to connect one PC to INPUT A and the other PC to INPUT B, becuase output A can only display content from input A, similarly output B can only display content from input B. For HDMI PC, you need to prepare a HDMI to DP adapter with USB power cord.If you want to get 2 screens from each PC, it won't work.
I meed to connect 2laptops on same external monitor. Lenovo g50 80 and hp ProBook. None of them has a usb c port. Can u recommend which kvm model should I use? Do i need any adaptor? Which one?
Kindly suggest.
I don't need to transfer data between pcs only need to display on monitor one at a time and control the displayed system with same keyboard mouse.
Would you like to tell me what types of ports both your Lenovo g50 80 and hp ProBook have?
@@saleskceve4544other person was silent but I got same issue my laptop got one hdmi, one usb 3.0 and two USB c opening and trying to work out how I can use this switch with it.
can you put a dacamp in the usbs? i bought the 2 pc 1 monitor version but i want the audio to be transferred as well
I bought it, and I have a problem, 2 monitors, 1 dp and 1 hdmi, all dp cables except 2, one connecting monitor hdmi to kvm with adapter that converts dp to hdmi, the problem is that one pc has all dp and it's working with the hdmi monitor and the other cable is kvm to laptop, with the same converter, dp to hdmi
great video. question: i have a Alienware M17 laptop and dual AW3418DW monitors. Is this doable??? or do I need a docking station??
Hi. friend. Thanks for your attention. To provide you the most suitable solution, could you please tell me what kind of interfaces your laptop and monitors have?
So I need display port 1.4 cables? Am I able to use display port 1.4 to hdmi for the monitors?
You mean your monitor only has HDMI port?If so, you could use Active Displayport to HDMI cable for your HDMI monitor, But please note that the direction of the DP to HDMI converter and it must be active rather than passive.Otherwise it will affect the performance.
Do I need to connect it to a power supply? (The DC/5V input on the side on the product)?
For normal USB devices, you don't need to connect the 5V power supply. The KVM can get power from the USB cables which connect the PC and the KVM. For some high power consumption USB devices, you could connect the external power cable to make the USB recognition more stable.
I often have the annoying symptom that the screen stays black when I switch between the PC's. Then I have to restart the PC until it's working well.
It's connect to one dockingstation and to a normal desktop PC. What do you think? Do you have any recommendations to fix this issue.
It's like that one monitor is connected via DP and one via HDMI.
Do you mean your desktop PC is connected to the KVM input ports through a docking which has 2 DP ports?
@@saleskceve4544 Thank you for your reply. I have the following situation:
I have this model in the video, but with 1 x DP and 1 x HDMI.
I have connected both montiors with 1 x DP cable and 1 x HDMI cable.
I did the same cabling for the Dockingstation of my notebook. I never had issues with the Dockingstation.
And then I did the exactly same cabling for my desktop pc directly into the graphics card (RTX 2060 Super).
And only for the desktop pc I have sporadic the issue that when I'm going to start the PC that it doesn't work properly.
It can be descriped like this: the monitor shortly regnognize a signal, but then directly went into black.
I have to restart the PC one or two times until it's working as it should be.
Sometimes it's always working fine without issues. But then I have above descriped situation.
I never had this issue as my desktop pc was directly connected to the monitors.
@@DarkArchery1511 Friend. to solve your problem, you could try replacing another standard DP 1.4 cables within 1.5 meters that connect your deskptop and the KVM.
@@saleskceve4544 I replaced the DP cable through a new DP 1.4 cable. I tested it a few days, but honestly it didn't fix my issue
Hi, thanks for the vid.
Dumb question : How do you display PC1 on Screen 1 and PC 2 and Screen 2 ? Both computers at the same time, is it possible? It is not shown on the vid :(
Hi. Friend.Thanks for your time. This model doesn't support display screens from PC1 and PC2 at the same time. But we have another model which can meet your requirement. You could refer to ASIN B0CJLQNX2N
just asking I have 2 PC and 2 monitor It works fine with switch in between. But is there a option for 1 PC 1 monitor for this switch?
Nope. Dear friend. This KVM switch has 2 independent circuit board. You could also use it for 2 computers 1 monitor kvm switch. For example, plug your 2 computers into INOUT A1 and INPUT A2, plug the monitor into OUT A, OR plug your 2 computers into INOUT B1 and INPUT B2, plug the monitor into OUT B.
In this way, you can share 1 monitor and 1 set of keyboard mouse between 2 computers. Please note that the USB cable should be connected to the relevant USB port to make the USB devices work properly.
Do you have any video for the 3 computer 3 monitor 4K@120hz model?
I haven't taken a video for 3 computers 3 monitors model, but you could tell me what information you would like to know, I will take a video according to your requirements.😁
I have a curious about If i connect 1 PC with DP 2 Cable to 2 Monitor.And 1 Macbook Pro M1 Pro with IVanky Max 1 Docking Station ( With capable to extend 2 Monitor without using DisplayLink) By Using 2 port Thunderbolt 4 and connect from Dock to KVM switch. Via USB Type-C to DP to KVM and then Connect from KVM to 2 Monitor Via DP port. will it work?
Or can i have an email to direct question by any chance?
Dear friend. Normally it will work , it is worth to have a try.
Hi! Only have the duplicate Mode or extended Mode? Or it can be 1 pc 1 monitor and other pc other monitor?
I'm using an almost similar KVM switch and both duplicate and extended modes are viable.
Hi. friend.Thanks for yur question. This model in the video only support extended mode and duplicate mode, if you are looking for a kvm switch which support 1 PC 1 monitor, the other PC to other monitor, you could refer to this one in the below link: ruclips.net/video/mJdGq-DWHMg/видео.html
Hi. I'm considering to buy this kvm. Have just one question: Does it support G-Sync?
I just got mine yesterday, when I switch back and forth, my Gsync pops up letting me know that my monitor is gsynch compatible
Yes. as long as your DP monitor support G-sync, the KVM will support it.
Do you have to plug in all three for each device?
If you want to share 2 monitors and USB devices between 2 computers simultaneously, yeas, 3 cables for each PC are needed.
Does this work with ultrawide 1440p 180hz? (3440x1440@180) I know displayport 1.4 supports it but wondering if the KVM can handle it.
Hi. friend. we are using standard DP 1.4 chip. So the highest resolution supoorted by the KVM is 3840*1440@144Hz, so there is no problem with 3440*1440@180Hz, but please make sure that the DP cables you are using are also standard DP 1.4 cables.
Will this work on Mac M2 and PC desktop? How?
Yes. It works. But please note that M2 chip doesn't support extend mode unless you use Displaylink Docking. You just need to connect 2 DP cables+1 USB cable from your MAC M2 and desktop to the relevant ports on the KVM, you can easily switch between the 2 signals to share 2 monitors and 4 USB devices.
Hello, can you make sure if this support 2x 1440p 165hz, with a specific monitor Acer Predator XB271HU. Don't want to order and when it arrives I find out it doesnt work. Thank you
Hi. Dear friend
Thanks for your question, This is Molly.
To be honest, we didn't test 165Hz with ultra-wide monitor. The highest resolution we tested is 3840*2160@144Hz using high quality standard DP 1.4 cable wwithin 1.5M.Theoretically it will support 2560*1440@165Hz, but I am sorry that I can't give you exact answer. If you are willing have a test and you are in Austrialian, you could purchase one and then send me a message to our email address printed on the back of the KVM, I will apply a special discount for you. Your help would be much apperciate.
Did the 165hz monitor work with it?
Recommendation 3840* 2160@144Hz@@JayZoop
Hi mate, amazing video, it help me a lot ! One quick question, I have a pc with 2 dp and all fine there, but my laptop have only one hdmi. Should I buy a dock for my laptop? Would that work? Thanks !!!
Hi. friend. Thanks for your attention. To make your laptop work normally, you need to make sure there are 2 video output interface on your laptop. you could check if your laptop has another video output ports like USB-C type shit. If it has USB-C port, you could use the KVM with a USB-C docking which has 2 DP ports .If it only has 1 HDMI port, it may not work as your expect.
Awesome @@saleskceve4544 Thanks for your help!! I'm just waiting for the mini USB to DP adapter to make it work. In the meantime, I've been running some tests, and is it possible that an HDMI to DP cable doesn't work properly? I have a DP cable and an HDMI to DP cable in the KVM, but it doesn't give a signal to the HDMI screen; the DP screen is just fine.
@@UFRANSA No worries. My friend. If you want to test HDMI to DP adapter, you need to note that you need to use an HDMI to DP cable with external USB power cable. Otherwise, it won't work because of poor compatibility.
@@saleskceve4544 for the cables hdmi to dp I understand, let me know if you have one so I can buy the same. But for the usb-c to dp I will need an external USB power cable? Or is it only for hdmi to dp cable? Thanks a lot mate really !!
@@UFRANSA If your want to connnect your laptop through HDMI interface to the DP input interface on the KVM, you need to use HDMI to Displayport adapter with external USB power cable, AS for the USB-C to DP cable, usually it built-in chip which support power supply, so it doesn't need external power.
Does this support Debian Linux operating system ???
hi, does it support 1920x1080@144hz?
Yes. it does supports 1920*1080@144Hz， but please use high quality Displayport cables within 1.5M.
Can I switch between extended mode and copy mode on Linux?
Yes. As long as your Linux supports extended mode copy mode.
Can I use active DP to HDMI for one output? Have an x15r7 and 3070ti is connected to HDMI port.
Do you mean your PC output interface is HDMI port, right? If so, you need to use a HDMI to DP converter with USB power supply not DP to HDMI converter. Besides this, what you need to note is that the resolution depends on what your converter supports.
@@saleskceve4544 thank you. If active adapter/pc/monitor all capable of 4k 120hz, does this KVM switch support dual 4k 120htz?
@@adamm6733 YES, it supports.
@@adamm6733 As matter of in fact, for Displayport devices, the highest resolution supported by the KVM is 7680*4320@30Hz or 3840*2160@144Hz if you use high quality standard DP 1.4 cable. So 3840*2160@120Hz is compatible.
Usb for keyboard and mouse is not working for me
If only it worked for me!
We have many models of KVM, maybe you could tell me what you want to do, I will recommend the suitable model for you.😊
Please add EDID support on next versions of this switch, I really wanted to buy it but lack of EDID made me change my mind
Thanks for your attention and suggestion. I will submit your tips to our technical team. 🤩
Can I use an DC/5V external power source?
Yes, you can,
We now have new products,
of course. Dear. You can connect a 5V/2A adapter to the KVM to power the KVM. This will make the USB recignition more stable. But if you also want to make the USB devices work normally, you also need to connect the USB cable between the PC and the KVM.
DOES IT SUPPORT 1080P , 240HZ ?
@saleskceve4544
my alienware M17 R3 laptop - 1- ext graphics display port, 1- HDMI 2.0 port, 1- mini display port 1.4,2-usb 3.1 gen ports, 1- usb3.1 port, 1- thunderbolt 3 port, AW3418DW monitor - 1-hdmi port, 1-display port
Yes, dear friend. This unit works with your set up. But it is not the best option for you. Because you will need to purchase some converters . Since your laptop has 1 Displayport and 1 HDMI port, your 2 monitors are also have DIsplayport and HDMI port, so you could refer to this model amzn.to/3SU7SoN. This model is mainly designed for those users who have computers and monitors with 1 DP and 1 HDMI port. Hope these can help you.
@@saleskceve4544 based on your replay, can you give your best guest of how to use KVM for a one laptop and dual monitor setup. thank you
@@briangreene4277 Sorry. Friend. I am not sure what you mean by that. Do you mean you only want to connect 1 laptop to 2 monitors? If so, you only need to connect your laptop to your 2 monitors directly through the Displayport and HDMI port.
How about 1080p hz support?
Thanks for your attention. Friend. This model supports max resolution up to 1080P@240Hz if your PCs, monitor and DP cables support this resolution.
does it support macbook m1?
Yes. It supports. But you need to prepare a USB-C docking with 2 DP ports if you want to output 2 screens. Besides this, M1/M2 chip doesn't support extend screen unless you have a Displaylink USB-C docking.
Was that terrible music chosen to scare people away from this video? Had to watch on mute, thanks for demo though. I have been looking for a setup tutorial for this switch forever.
Uh, I am sorry to scare you .I just think this background music is relax and cheerful. Is there any special scene for this music or something special meaning type shit? I would be glad to know more difference between your country and ours.
🤣🤣🤣🤣
😛😛😛@@ELEKTROGOWK
Not annoying pop songs. Something more chill.
@@normnormlson7246 Thanks for your kind suggestion.
Is there any latency when using this system? Especially when playing video games
It will not affect the gaming experience during use, but there may be a momentary lag during switching
My keyboard and mouse only work on one PC, screens work fine
Hi. Friend
To make keyboard mouse swith between your PCs, you need to connect the USB cable from each PC to the corresponding port on the back of the KVM. You could check it out if you have connected the USB cable.correctly.
@@saleskceve4544 thank you that worked
This solution is too complicated, especially because 6 HDMI cables are needed, 2 of which are connected to the monitor, and each computer needs to be connected to 2 HDMI cables. If the laptop does not have an HDMI port, it also needs to be equipped with an expansion dock. We now have a new solution that only requires 2 HDMI cables to connect the monitor, saving users 4 HDMI cables and 2 expansion docks. Bloggers, please contact me if you need it. We are a manufacturing factory and can produce it for you. Friends in need can also find me. Welcome to leave a message